SWS -Troubleshooting54B-51
Inspection Procedure P-16
Power window main switch: Any switch signal is not sent
to the ETACS-ECU.Probable cause
If there is a problem with communication between the power windowmainswitch
and the ETACS-ECU, the input signal check for the power windowmainswitch
can no longer be carried out. In addition, the power window timer function will
also stop working.DMalfunction of power windowmainswitch
DMalfunction of ETACS-ECU
DMalfunction of harness wire or connector
Ye s
NG
Repair
NG
No
(1) NG
NG
Repair
NG
Check the harness wire between power windowmainswitch and
power window relay.
OK
Replace the power windowmainswitch.
NG
Repair
NG
Check the harness wire between power windowmainswitch and
body earth.
NG
Repair
Check trouble symptoms.NGReplace the ETACS-
ECU.
OK
Check trouble symptoms.
(2) NG
Check the following connectors:
H-05, D-25
OK
Check trouble symptoms.
Check the following connectors:
H-05, H-25, D-208, D-221Measure at power windowmainswitch connector H-05.
DDisconnect connector and measure at harness side.
DTurn the ignition switch to ON position.
(1) Voltage between terminal 1 or
5 and body earth.
OK:System voltage
(2) Continuity between terminal 5
or 3 and body earth.
OK:Continuity
OK
Replace the power win-
dow mainswitch
Check the harness wire between power windowmainswitch and
ETACS-ECU.
OK
Check trouble symptoms.
Check the following connectors:
H-05, D-25, D-31, D-226Can the driver’s side power window be operated by the power
window mainswitch?
www.WorkshopManuals.co.uk
Purchased from www.WorkshopManuals.co.uk
