1999 TOYOTA AVENSIS wheel

– INTRODUCTIONTERMS
IN–37
2ndSecond
2WDTwo Wheel Drive Vehicle (4x2)
4WDFour Wheel Drive Vehicle (4x4)

PP0MS–05
PP–18
– PREPARATIONSUPPLEMENTAL RESTRAINT SYSTEM
EQUIPMENT
Torque wrench
Tire Width: 185 mm (7.28 in.) Inner diam.: 360 mm (14.17 in.)Airbag disposal
Tire with disc wheel Width: 185 mm (7.28 in.)
Inner diam.: 360 mm (14.17 in.)Airbag disposal
Vinyl bagAirbag disposal

SS0G7–04
– SERVICE SPECIFICATIONSMANUAL TRANSAXLE (E251)
SS–7
TORQUE SPECIFICATION
Part tightenedN·mkgf·cmft·lbf
Transaxle upper side x Engine Bolt A
Bolt B64
29650
29647
21
Transaxle lower side x Engine Bolt A
Bolt B
Bolt C
Bolt D
Bolt E40
40
8
20
46408
408
82
204
47030
30
71 in.·lbf
15
34
Diesel throttle body x Engine unit2121415
No.1 air tube assembly x Engine unit2525518
Diesel throttle body with No.2 air tube assembly x Engine unit2525518
Engine front mounting x Engine front mounting bracket8789064
Engine front mounting x Transaxle6465047
Engine rear mounting x Engine rear mounting bracket981,00072
Engine rear mounting x Transaxle6465047
Starter x Starter wire1515311
Starter x Transaxle3940029
Transaxle case protector x Transaxle2525018
Clutch release cylinder x Clutch housing121209
Clutch line bracket x Transaxle Bolt A
(See page MX–4) Bolt B12
4.9120
509
43 in.·lbf
Engine left mounting x Bracket8789064
Engine left mounting Bracket x Transaxle5253038
Front wheel1031,05076
Front exhaust pipe x Exhaust manifold6263046
Front exhaust pipe x Center exhaust pipe4849035
Engine rear mounting x Center member7374054
Engine rear mounting bracket x Body6465047
Engine rear mounting bracket x Engine rear mounting8789064
Engine front mounting x Center member5254038
Engine front mounting bracket x Transaxle6465047
Engine front mounting bracket x Engine front mounting8789064
Front transport hook x Center member3940029
Engine mounting center member x Body7374054
Transaxle case protector x Transaxle2525018
No.2 selecting bellcrank with selecting bellcrank support2020014
Shift and select lever shaft lock bolt4950036
Shift and select lever shaft assembly x Transmission case2020014
Transmission case cover x Transmission case2930022
Breather plug4950036
Output shaft lock nut1231,25090
Shift fork and shift head set bolt2424017
Rear bearing retainer x Transmission case4243031
Straight screw plug2525018
Straight screw plug (Reverse restrict pin)131309
Reverse idler gear shaft lock bolt2930022

SS061–28
– SERVICE SPECIFICATIONSSUPPLEMENTAL RESTRAINT SYSTEM
SS–15
SUPPLEMENTAL RESTRAINT SYSTEM
TORQUE SPECIFICATION
Part tightenedN·mkgf·cmft·lbf
Steering wheel x Steering main shaft7879058
Front passenger airbag assembly x Instrument panel reinforcement2121015
Seatback frame set bolt2525518
Front seat installation bolt3737527
Front seat belt lap outer ancher set bolt4243031
Curtain shield airbag (infrater) x Instrument panel reinforcement9.810087 in.·lbf
Curtain Shield Airbag (deployment section) x Body55144 in.·lbf
Side and curtain shield airbag sensor assembly x Body2121015
Front seat outer belt retractor Upper bolt
Lower bolt5.0
4251
43044 in.·lbf
31
Instrument panel x Reinfocement1818413
Seatback x Body2121415

SS0K4–02
SS–18
– SERVICE SPECIFICATIONSBODY
BODY
TORQUE SPECIFICATION
Part tightenedN·mkgf·cmft·lbf
FRONT WIPER AND WASHER–––
Wiper arm x Wiper link2020515
INSTRUMENT PANEL–––
Curtain shield air bag x Body55144
Steering wheel set nut3435025
Passenger airbag assembly x Reinforcement1818513
FRONT SEAT–––
Front seat assembly x Body3737527
REAR SEAT (Sedan)–––
Seatback assembly x Body2121415
Side seatback x Body2121415
REAR SEAT (Except Sedan)–––
Side seatback x Body2121415
Seat cushion assembly x Body2121415
SEAT BELT–––
Front Seat Belt :
Shoulder anchor adjuster x Body4243031
Shoulder anchor x Body4243031

DI693–01
– DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
DI–1
SUPPLEMENTAL RESTRAINT SYSTEM
PRE–CHECK
RELEASE METHOD OF AIRBAG ACTIVATION PREVENTION MECHANISM
An airbag activation prevention mechanism is built into the connector for the squib circuit of the SRS.
When release of the airbag activation prevention mechanism is directed in the troubleshooting procedure,
as shown in the illustration on the following pages, insert paper which has the same thickness as the male
terminal, between the terminal and short spring.
CAUTION:
Never release the airbag activation prevention mechanism on the steering wheel pad connector.
NOTICE:

Do not release the airbag activation prevention mechanism unless specifically directed by the
troubleshooting procedure.

If the inserted paper is too thick the terminal and short spring may be damaged, so always use
paper with the same thickness as the male terminal.

H11822
Airbag Sensor
AssemblySide Airbag Assembly (RH)
(Squib)
Pretensioner (RH)
(Squib)
Side and Curtain Shied
Airbag Sensor (RH)1
2
3
4
5
6
7
89
10
11
12
1314
15Front Airbag Sensor
(RH)
Front Passenger Airbag
Assembly (Squib)
Spiral Cable
Steering Wheel
Pad (Squib)
No.1 J/B
Pretensioner (LH)
(Squib) Front Airbag Sensor
(LH)
Side Airbag Assembly (LH)
(Squib)
16
19
18
17
2021Curtain Shied Airbag
Assembly (RH) (Squib)
Curtain Shied Airbag
Assembly (LH) (Squib)
Side and Curtain Shied
Airbag Sensor (LH) DI–2
– DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM

DI695–01
H11591
Combination Meter
(Warning Light)Steering Wheel Pad
(with Airbag)
Airbag Sensor Assembly Front Passenger
Airbag Assembly
Side Airbag Assembly
(LH)
Seat Belt
Pretensioner (LH)Side Airbag Assembly (RH)
Seat Belt
Pretensioner (RH)
Front Airbag
Sensor (LH)
Front Airbag Sensor (RH)
Side and Curtain Shield
Airbag Sensor (RH) Side and Curtain Shield
Airbag Sensor (LH)Curtain Shield Airbag
Assembly (LH)Curtain Shield Airbag Assembly (RH)
– DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
DI–5
PARTS LOCATION