Model 248 (4WD) 7.3 Pts. (3.4L)
\
\
\
\
\
Model 267 (2WD) 7 Pts. (3.3L)
\
\
\
\
\
Model 267 (4WD) 7.8 Pts. (3.6L)
\
\
\
\
\
Model 286 (2WD) 6.8.Pts. (3.2L)
\
\
\
\
\
Model 286 (4WD) 10.1 Pts. (4.8L)
\
\
\
\
\
\
\
Rear Axle Model 248 (2WD) 6.3 Pts. (3L)
Limited Slip
\
\
\
\
\
Differential Model 248 (4WD) 7.3 Pts. (3.4L)
\
\
\
\
\
Model 267 (2WD) 7 Pts. (3.3L)
\
\
\
\
\
Model 267 (4WD) 7.8 Pts. (3.6L)
\
\
\
\
\
Model 286 (2WD) 6.8 Pts. (3.2L)
\
\
\
\
\
Model 286 (4WD) 10.1 Pts. (4.8L)
\
\
\
\
\
\
\
Front Axle Model 216 6.8 Pts. (3.6L)
Lubricant
\
\
\
\
\
Model 248 7.6 Pts. (3.6L)
\
\
\
\
\
\
\
Transfer Case NV231 HD 2.5 Pts. (1.2L)
Fluid
\
\
\
\
\
\
\
Power Take NV021 4.6 Pts. (2.1L)
Off Adapter
\
\
\
\
\
\
\
Power Drained 2.7 Pts. (1.3L)
Steering
Fluid
\
\
\
\
\
\
\
A/C Charge Capacity 32 Oz. (.9Kg)
Refrigerant
\
\
\
\
\
\
\
Refrigerant A/C System Capacity 7.75 Oz. (230ML)
Oil
\
\
\
\
\
\
\
Fuel Tank 119" & 139" Wheelbase Vehicles 26 Gal. (98L)
\
\
\
\
\
All Others 35 Gal. (132L)
\
\
\
\
\
\
\
(
1) - Capacities are recommended or calculated levels. Always use
dipstick (if available) to measure level.
\f
\
\
\
\
\
\
\
MISCELLANEOUS NOTES
* Once a month, check tire pressure and look for unusual wear
or damage.
* Once a month, Inspect battery and clean and tighten
terminals as required.
* Once a month, check fluid levels of coolant reservoir,
brake master cylinder, power steering & transmission.
Add fluids as required.
* Once a month, check all lights and all other electrical items
for correct operation
Lubricant
\
\
\
\
\
\
\
Transfer Case NV241 HD 6.5 Pts. (3.1L)
Fluid
\
\
\
\
\
\
\
Power Take NV021 4.6 Pts. (2.1L)
Off Adapter
\
\
\
\
\
\
\
Power Drained 2.7 Pts. (1.3L)
Steering
Fluid
\
\
\
\
\
\
\
A/C Charge Capacity 32 Oz. (.9Kg)
Refrigerant
\
\
\
\
\
\
\
Refrigerant A/C System Capacity 7.75 Oz. (230ML)
Oil
\
\
\
\
\
\
\
Fuel Tank Capacity 35 Gal. (132L)
\
\
\
\
\
\
\
(
1) - Capacities are recommended or calculated levels. Always use
dipstick (if available) to measure level.
\f
\
\
\
\
\
\
\
MISCELLANEOUS NOTES
* Once a month, check tire pressure and look for unusual wear
or damage.
* Once a month, inspect battery and clean and tighten
terminals as required.
* Once a month, check fluid levels of coolant reservoir,
brake master cylinder, power steering & transmission.
Add fluids as required.
* Once a month, check all lights and all other electrical items
for correct operation
* Once a month, drain water from fuel filter.
* Once a month, check Filter Minder.
* Once a month, inspect and clean wiper blades as required.
\
\
\
\
\
Model 286 (4WD) 10.1 Pts. (4.8L)
\
\
\
\
\
\
\
Rear Axle Model 248 (2WD) 6.3 Pts. (3L)
Limited Slip
\
\
\
\
\
Differential Model 248 (4WD) 7.3 Pts. (3.4L)
\
\
\
\
\
Model 267 (2WD) 7 Pts. (3.3L)
\
\
\
\
\
Model 267 (4WD) 7.8 Pts. (3.6L)
\
\
\
\
\
Model 286 (2WD) 6.8 Pts. (3.2L)
\
\
\
\
\
Model 286 (4WD) 10.1 Pts. (4.8L)
\
\
\
\
\
\
\
Front Axle Model 216 6.8 Pts. (3.6L)
Lubricant
\
\
\
\
\
Model 248 7.6 Pts. (3.6L)
\
\
\
\
\
\
\
Transfer Case NV241 5 Pts. (2.7L)
Fluid
\
\
\
\
\
NV241 HD 6.5 Pts. (3.5L)
\
\
\
\
\
NV241 HD W/PTO 9 Pts. (4.9L)
\
\
\
\
\
\
\
Power Take NV021 4.6 Pts. (2.1L)
Off Adapter
\
\
\
\
\
\
\
Power Drained 2.7 Pts. (1.3L)
Steering
Fluid
\
\
\
\
\
\
\
A/C Charge Capacity 32 Oz. (.9Kg)
Refrigerant
\
\
\
\
\
\
\
Refrigerant A/C System Capacity 7.75 Oz. (230ML)
Oil
\
\
\
\
\
\
\
Fuel Tank 119" & 139" Wheelbase Vehicles 26 Gal. (98L)
\
\
\
\
\
All Others 35 Gal. (132L)
\
\
\
\
\
\
\
(
1) - Capacities are recommended or calculated levels. Always use
dipstick (if available) to measure level.
\f
\
\
\
\
\
\
\
MISCELLANEOUS NOTES
* Once a month, check tire pressure and look for unusual wear
or damage.
* Once a month, Inspect battery and clean and tighten
terminals as required.
* Once a month, check fluid levels of coolant reservoir,
brake master cylinder, power steering & transmission.
Add fluids as required.
* Once a month, check all lights and all other electrical items
for correct operation
* Once a month, Inspect and clean wiper blades as required.
* Twice a year, lubricate the external lock cylinders.
2.4L ........................................... 11.2 Qts. (10.6L)\
3.0L ........................................... 13.0 Qts. (12.3L)\
3.3L & 3.8L .................................... 13.2 Qts. (12.5L)\
Automatic Transaxle (Mopar ATF Plus Type 7176)
3-Speed
Drain & Refill .............................. (4) 4.0 Qts. (3.8L)
Dry Refill ...................................... 8.5 Qts. (8.0L)\
4-Speed
Drain & Refill .............................. ( 4) 4.0 Qts. (3.8L)
Dry Refill ...................................... 9.1 Qts. (8.6L)\
Overrunning Clutch
(Mopar ATF Plus Type 7176 - AWD Models) ...................... ( 5)
Power Steering Fluid ( 6) ............................ 1.7 Pts. (.8L)
Power Transfer Unit
(SAE 80W-90/API GL-5 - AWD Models) .............. 1.2 Qts. (1.14L\
)
Rear Differential
(SAE 80W-90/API GL-5 - AWD Models) ( 5) ....................... ( 7)
( 1) - Approximate quantity listed.
( 2) - Use an API energy conserving engine oil that is certified for
gasoline engines on all engines except 3.3L flex-fuel models.
On 3.3L flex-fuel models, use Mopar Flex-Fuel 5W-30 engine oil
or an equivalent that meets Chrysler Standard MS-9214. Proper
engine oil MUST BE used to prevent engine damage. The 3.3L
flex-fuel model may be referred to as Flex-Fuel Vehicle (FFV)
model and is used in all vehicles except California emission
vehicles. Flex-fuel model may be also referred to as an E85
application and may be identified by label attached to inside of
gasoline filler door.
( 3) - Quantity includes heater and coolant recovery tank. Add 2 qts.
(1.9L) if equipped with rear heater.
( 4) - Add this amount of fluid. Start engine and shift transaxle
through all gears and back to Park. Add additional fluid to
bring fluid level to 1/8" below the ADD mark on dipstick.
Recheck fluid level with transaxle at normal operating
temperature. Adjust fluid level so fluid level is within the
HOT range dipstick.
( 5) - An overrunning clutch is bolted on front of rear differential,
between torque tube for drive shaft and rear differential.
Overrunning clutch contains a separate reservoir from rear
differential. Ensure fluids are checked at appropriate
component, as different types of fluids are used. Fluid capacity
is not available from manufacturer.
( 6) - Use only Mopar power steering fluid. DO NOT use automatic
transmission fluid.
( 7) - Capacity is not available from manufacturer. Fill unit until
fluid level is even with bottom of filler plug hole.
\
\
\
\
\
\
\
FLUID CAPACITIES (DAKOTA) \
\
\
\
\
\
\
Application ( 1) Quantity
Crankcase (Includes Filter) ( 2)
2.5L ............................................. 4.5 Qts. (4.3L)\
3.9L ............................................. 4.0 Qts. (3.8L)\
5.2L & 5.9L ...................................... 5.0 Qts. (4.7L)\
Cooling System (Includes Heater)
2.5L ............................................. 9.8 Qts. (9.3L)\
3.9L ........................................... 14.0 Qts. (13.2L)\
5.2L & 5.9L .................................... 14.3 Qts. (13.5L)\
Automatic Transmission
(Mopar ATF Plus Type 7176)
Drain & Refill .............................. (3) 1.5 Qts. (1.4L)
Dry Refill ....................... ( 4) 10.0-11.5 Qts. (9.5-10.8L)
Manual Transmission ( 5)
AX 15 (SAE 75W-90/API GL-5) 2.5L & 3.9L .......... 3.3 Qts. (3.1L\
)
NV 3500 (Mopar M/T Lube, P/N 4761526) 5.2L ....... 2.1 Qts. (2.0L\
)
Front Differential (SAE 80W-90/API GL-5) ........... 3.0 Pts. (1.4L\
)
Rear Differential (SAE 80W-90/API GL-5) ( 6)
8 1/4" Ring Gear ( 7) ............................. 4.4 Pts. (2.1L)
9 1/4" Ring Gear ( 7) ............................. 4.8 Pts. (2.3L)
Power Steering Fluid ( 8)
2WD ............................................... 1.7 Pts. (.8L)\
4WD .............................................. 2.5 Pts. (1.2L)\
Transfer Case (Mopar ATF Plus Type 7176) ........... 2.5 Pts. (1.2L\
)
( 1) - Approximate quantity listed.
( 2) - Use an API energy conserving engine oil that is certified for
gasoline engines.
( 3) - Add this amount of fluid. Start engine and shift transmission
through all gears and back to Neutral. Add additional fluid to
bring fluid level to the MIN mark on dipstick. Recheck fluid
level with transmission at normal operating temperature. Adjust
fluid level to MAX mark on dipstick. Approximate drain and
refill capacity is 4.0 qts. (3.8L).
( 4) - Quantity may vary by type of oil cooler and oil cooler lines.
( 5) - Verify type of transmission used before servicing. The AX 15
uses a flywheel housing bolted to the front of the transmission.
The NV 3500 uses a flywheel housing which is an integral part of
the transmission housing.
( 6) - Models with Trac-Lok limited slip differential must have 5 ozs.
(.15L) of Mopar Trac-Lok Friction Modifier added if lubricant is\
changed.
( 7) - Rear differential may be identified by number of bolts on rear
cover. The 8 1/4" ring gear has 10 bolts on rear cover and 9
1/4" ring gear has 12 bolts on rear cover.
( 8) - Use only Mopar power steering fluid. DO NOT use automatic
transmission fluid.
\
\
\
\
\
\
\
FLUID CAPACITIES (DURANGO) \
\
\
\
\
\
\
Application ( 1) Quantity
Crankcase (Includes Filter) ( 2)
3.9L ............................................. 4.0 Qts. (3.8L)\
5.2L & 5.9L ...................................... 5.0 Qts. (4.7L)\
Cooling System (Includes Heater)
3.9L ........................................... 14.0 Qts. (13.2L)\
5.2L & 5.9L .................................... 14.3 Qts. (13.5L)\
Automatic Transmission
(Mopar ATF Plus Type 7176)
Drain & Refill .............................. ( 3) 1.5 Qts. (1.4L)
Dry Refill ....................... ( 4) 10.0-11.5 Qts. (9.5-10.8L)
Front Differential
(SAE 80W-90/API GL-5) ............................. 3.0 Pts. (1.4L\
)
Rear Differential
(SAE 80W-90/API GL-5) ( 5)
8 1/4" Ring Gear ( 6) ............................ 4.4 Pts. (2.1L)
9 1/4" Ring Gear ( 6) ............................ 4.8 Pts. (2.3L)
Power Steering Fluid ( 7) ........................... 2.5 Pts. (1.2L)
Transfer Case (Mopar ATF Plus Type 7176) ( 8)
NV 231 & NV 231HD ................................ 2.5 Pts. (1.2L)\
NV 242 ........................................... 3.0 Pts. (1.4L)\
(1) - Approximate quantity listed.
( 2) - Use an API energy conserving engine oil that is certified for
gasoline engines.
( 3) - Add this amount of fluid. Start engine and shift transmission
through all gears and back to Neutral. Add additional fluid to
bring fluid level to the MIN mark on dipstick. Recheck fluid
level with transmission at normal operating temperature. Adjust
fluid level to MAX mark on dipstick. Approximate drain and
refill capacity is 4.0 qts. (3.8L).
( 4) - Quantity may vary by type of oil cooler and oil cooler lines.
( 5) - Models with Trac-Lok limited slip differential must have 5 ozs.
(.15L) of Mopar Trac-Lok Friction Modifier added if lubricant is\
changed.
( 6) - Rear differential may be identified by number of bolts on rear
cover. The 8 1/4" ring gear has 10 bolts on rear cover and 9
1/4" ring gear has 12 bolts on rear cover.
( 7) - Use only Mopar power steering fluid. DO NOT use automatic
transmission fluid.
( 8) - Transfer case may be identified by model number stamped on
identification tag on rear of transfer case, just above filler
plug.
\
\
\
\
\
\
\
FLUID CAPACITIES (RAM PICKUP) \
\
\
\
\
\
\
Application ( 1) Quantity
Crankcase (Includes Filter) ( 2)
3.9L ............................................. 4.0 Qts. (3.8L)\
5.2L & 5.9L (Gasoline) ........................... 5.0 Qts. (4.7L\
)
5.9L (Diesel) .................................. 11.0 Qts. (10.4L\
)
8.0L ............................................. 7.0 Qts. (6.6L)\
Cooling System (Includes Heater)
3.9L, 5.2L & 5.9L (Gasoline) ................... 20.0 Qts. (18.9L\
)
5.9L (Diesel) .................................. 24.0 Qts. (22.7L\
)
8.0L ........................................... 26.0 Qts. (24.6L)\
Automatic Transmission
(Mopar ATF Plus Type 7176)
42RE (3.9L)
Drain & Refill .............................. ( 3) 1.5 Qts. (1.4L)
Dry Refill ........................ ( 4) 8.5-11.0 Qts. (8.0-10.4L)
46RE (3.9L, 5.2L & 5.9L Gasoline)
Drain & Refill .............................. ( 3) 1.5 Qts. (1.4L)
Dry Refill ........................ ( 4) 9.5-11.5 Qts. (8.9-10.8L)
47RE (5.9L Diesel & 8.0L)
Drain & Refill .............................. ( 3) 1.5 Qts. (1.4L)
Dry Refill ...................... ( 4) 14.5-16.5 Qts. (13.7-15.6L)
Manual Transmission ( 5)
NV 3500 (Mopar M/T Lube,
P/N 4761526 - 3.9L & 5.2L) ...................... 2.1 Qts. (2.0L)\
NV 4500 (Mopar M/T Lube,
P/N 4637579) ( 6) - 5.9L
(Gas & Diesel) & 8.0L .......................... 4.0 Qts. (3.8L\
)
NV 5600 (Mopar M/T Lube,
P/N 4761526) ( 6) ............................... 4.75 Qts. (4.5L)
Front Differential (SAE 80W-90/API GL-5)
Dana 44 (Model 216 - 1500 & 2500) ................ 4.8 Pts. (2.3L\
)
Dana 60 (Model 248 - 2500 & 3500) ................ 7.6 Pts. (3.6L\
)
Rear Differential
9 1/4" Ring Gear
(SAE 75W-90/API
GL-5 - 1500 & 2500) ( 7) ........................ 4.8 Pts. (2.3L)
Dana 60 (Model 248)
(SAE 90W/API GL-5 - 2500) (8) ................... 6.3 Pts. (3.0L)
Dana 70 (Model 267)
(SAE 90W/API GL-5 - 2500) ( 9) ................... 7.0 Pts. (3.3L)
Dana 80 (Model 286)
(SAE 85W-90/API GL-5) ( 10)
2WD 3500 ...................................... 6.8 Pts. (3.2L)\
4WD 3500 ..................................... 10.1 Pts. (4.8L)\
Power Steering Fluid ( 11) .......................... 2.7 Pts. (1.3L)
Power Take-Off (PTO) Adapter
(Mopar ATF Plus Type 7176)
2500 & 3500 Models 2WD With A/T .................. 4.6 Pts. (2.2L)\
Transfer Case (Mopar ATF Plus Type 7176) ( 12)
NV 231HD ......................................... 2.5 Pts. (1.2L)\
NV 241 ........................................... 5.0 Pts. (2.4L)\
NV 241HD ......................................... 6.5 Pts. (3.1L)\
NV 241HD With Power Take-Off (PTO) ............... 9.0 Pts. (4.3L\
)
( 1) - Approximate quantity listed.
( 2) - On gasoline engines, use an API energy conserving engine oil
that is certified for gasoline engines. On diesel engines, use
engine oil with API CF-4/SH or CG-4/SH rating for diesel
engines.
( 3) - Add this amount of fluid. Start engine and shift transmission
through all gears and back to Neutral. Add additional fluid to
bring fluid level to the MIN mark on dipstick. Recheck fluid
level with transmission at normal operating temperature. Adjust
fluid level to MAX mark on dipstick. Approximate drain and
refill capacity is 4.0 qts. (3.8L).
( 4) - Quantity may vary by type of oil cooler and oil cooler lines.
( 5) - Verify type of transmission used before servicing. The NV 3500
uses a flywheel housing which is an integral part of the
transmission housing. The NV 4500 uses a flywheel housing which
is bolted to the front of the transmission and transmission
contains a Power Take-Off (PTO) cover on passenger's side of
transmission.
( 6) - Heavy-duty transmission is used with 5.9L diesel and 8.0L.
( 7) - Models with Trac-Lok limited slip differential must have 5 ozs.
(.15L) of Mopar Trac-Lok Friction Modifier added if lubricant is\
changed.
( 8) - Models with Trac-Lok limited slip differential must have 6 ozs.
(.18L) of Mopar Trac-Lok Friction Modifier added if lubricant is\
changed.
( 9) - Models with Power-Lok limited slip differential must have 8 ozs.
(.24L) of Mopar Trac-Lok Friction Modifier added if lubricant is\
changed.
( 10 ) - Models with Trac-Lok limited slip differential must have Mopar
Trac-Lok Friction Modifier added if lubricant is changed. Add
7 ozs. (.24L) of modifier on 2WD models or 10 ozs. (.30L) on
4WD models.
( 11 ) - Use only Mopar power steering fluid. DO NOT use automatic
transmission fluid.
( 12 ) - Transfer case may be identified by model number stamped on
identification tag on rear of transfer case, just above filler
plug.
\
\
\
\
\
\
\
FLUID CAPACITIES (RAM VAN & RAM WAGON) \
\
\
\
\
\
\
Application ( 1) Quantity
Crankcase (Includes Filter) ( 2)
3.9L ............................................. 4.0 Qts. (3.8L)\
5.2L & 5.9L ...................................... 5.0 Qts. (4.7L)\
Cooling System (Includes Heater)
3.9L ........................................... 14.6 Qts. (13.8L)\
5.2L ........................................... 16.5 Qts. (15.6L)\
5.9L
With Rear Heater .............................. 16.0 Qts. (15.1L)\
Without Rear Heater ........................... 15.0 Qts. (14.2L)\
Automatic Transmission (Mopar ATF Plus Type 7176)
32RH (3.9L)
Drain & Refill .............................. (3) 1.5 Qts. (1.4L)
Dry Refill .......................... ( 4) 8.5-8.8 Qts. (8.0-8.3L)
46RE (5.2L & 5.9L)
Drain & Refill .............................. ( 3) 1.5 Qts. (1.4L)
Dry Refill ...................... ( 4) 11.5-11.7 Qts. (10.8-11.1L)
Power Steering Fluid ( 5) ........................... 2.7 Pts. (1.3L)
Rear Differential
Dana 60
(Model 248 - SAE 90/API GL-5) ( 6)( 7) ............ 6.3 Pts. (2.9L)
8 1/4" & 9 1/4" Ring Gear
(SAE 80W-90/API GL-5) ( 8)( 9) .................... 4.8 Pts. (2.3L)
( 1) - Approximate quantity listed.
( 2) - Use an API energy conserving engine oil that is certified for
gasoline engines.
( 3) - Add this amount of fluid. Start engine and shift transmission
through all gears and back to Neutral. Add additional fluid to
bring fluid level to the MIN mark on dipstick. Recheck fluid
level with transmission at normal operating temperature. Adjust
fluid level to MAX mark on dipstick. Approximate drain and
refill capacity is 4.0 qts. (3.8L).
( 4) - Quantity may vary by type of oil cooler and oil cooler lines.
( 5) - Use only Mopar power steering fluid. DO NOT use automatic
transmission fluid.
( 6) - Rear differential may be identified by full-floating axles
shafts.
( 7) - Models with Trac-Lok limited slip differential must have 6 ozs.
(.18L) of Mopar Trac-Lok Friction Modifier added if lubricant is\
changed.
( 8) - Rear differential may be identified by number of bolts on rear
cover. The 8 1/4" ring gear has 10 bolts on rear cover and 9
1/4" ring gear has 12 bolts on rear cover.
( 9) - Models with Trac-Lok limited slip differential must have 5 ozs.
(.15L) of Mopar Trac-Lok Friction Modifier added if lubricant is\
changed.
\
\
\
\
\
\
\
QUICK-SERVICE
SERVICE INTERVALS & SPECIFICATIONS
REPLACEMENT INTERVALS (CARAVAN, TOWN & COUNTRY, & VOYAGER) ( 1) \
\
\
\
\
\
\
Component Months Miles
Air Filter
Normal Service ..................... 24 ................. 30,000
Severe Service .................... ( 2) ............. ( 3) 15,000
Camshaft Timing Belt
2.4L
Normal Service .................... 96 ................ 120,000
Severe Service ................... ( 2) ................ 120,000
3.0L
Normal Service ( 4) ................ 48 ................. 60,000