1999 BUICK PARK AVENUE Owners Manual

Page 65 of 400

BUICK PARK AVENUE 1999  Owners Manual yellowblue     
2-7
You can also program the memory door locks feature
using the Driver Information Center. See ªDriver
Information Center Personal Choice Programmingº in
the Index.
Delayed Locking

Page 66 of 400

BUICK PARK AVENUE 1999  Owners Manual yellowblue     
2-8 Rear Door Security Locks
Your vehicle is equipped
with rear door security
locks that help prevent
passengers from opening
the rear doors of your
vehicle from the inside.
Using One

Page 67 of 400

BUICK PARK AVENUE 1999  Owners Manual yellowblue     
2-9 Lockout Protection
The power door locks will not work if the key is left in
the ignition and the drivers door is open. You can
override this feature by holding the power door lock

Page 68 of 400

BUICK PARK AVENUE 1999  Owners Manual yellowblue     
2-10
This system has a range of about 3 feet (1 m) up to 
30 feet (9 m). At times you may notice a decrease in
range. This is normal for any remote keyless entry
system. If the transmi

Page 69 of 400

BUICK PARK AVENUE 1999  Owners Manual yellowblue     
2-11
Personal Choice Features (If Equipped)
Each remote keyless entry transmitter can be
programmed to the drivers preference for memory door
locks, security feedback, delayed locking

Page 70 of 400

BUICK PARK AVENUE 1999  Owners Manual yellowblue     
2-12
Vehicles are delivered programmed in Mode 5; however,
each remote keyless entry transmitter can be
programmed to a different mode according to the users
preference. To change to

Page 71 of 400

BUICK PARK AVENUE 1999  Owners Manual yellowblue     
2-13 Battery Replacement
Under normal use, the battery in your remote keyless
entry transmitter should last about four years.
You can tell the battery is weak if the transmitter wont

Page 72 of 400

BUICK PARK AVENUE 1999  Owners Manual yellowblue     
2-14 Resynchronization
After replacing the battery in your transmitter, or if only
the instant alarm works, the transmitter needs to be
resynchronized to the receiver. Do this by press