01-230
"Brake
malfunction"
symbol ABS/EDL
warning
light
-K47- Traction
control
indicator light
-K86- Possible reasons why the indicator lamps light up
on on off
No DTCs are stored in DTC memory. The ABS and traction control
warning lights do not go out after the self-test, and three seconds
after the ignition is switched on the red "brake system malfunction"
symbol goes on. There is an open circuit or short circuit to B+ in the wiring that
controls the traction control indicator light between terminal 32 of
the ABS control module -J104- and the instrument cluster; carry
out "Electrical test" step 17. Voltage supply for control module less than 7 volts; carry out
"Electrical test" step 21.
on off off
No DTCs are stored in DTC memory. The red "brake system
malfunction" symbol remains lit after the ignition is switched on.
The brake fluid level is too lowMalfunction in instrument cluster: Carry out "Electrical test", step
18.
Pa
ge 16 of 27 Electronic Stabilization Pro
gram
(ESP
) Bosch 5.3
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.14
