01-225
"Brake
malfunction"
symbol ABS/EDL
warning
light
-K47- Traction
control
indicator light
-K86- Possible reasons why the indicator lamps light up
off off off
There is an irregularity. The indicator lamps go on during the self-
test and then go out. The possible causes are as follows: The voltage supply for the ABS control module -J104- is between
7 and 10 volts and the vehicle speed is < 6 km/h. Carry out
"Electrical test", step 21. The DTC "01119 gear recognition signal" is stored in the DTC
memory. Check DTC memory page 01
-356
.
The signal indicating whether the parking brake is set or released
is not being sent to the ABS control module -J104-. "Read
measuring value block" function 08 page 01
-256
, display group
2 page 01
-261
.
Check the brake light switch -F-. "Read measuring value block"
function 08 page 01
-256
, display group 2 page 01
-261
.
Check the zero position of the steering angle sensor -G85-. "Read
measuring value block" function 08 page 01
-256
, display group
5 page 01
-270
.
Pa
ge 11 of 27 Electronic Stabilization Pro
gram
(ESP
) Bosch 5.3
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.14
