01-224
"Brake
malfunction"
symbol ABS/EDL
warning
light
-K47- Traction
control
indicator
light
-K86- Possible reasons why the indicator lamps light up
off on on
A self-test is performed after the ignition is switched on. If all systems
are OK, warning lights, the ABS warning light -K47- and traction
control indicator light -K86- go out after approximately three seconds.
If the indicator lamps do not light up, check the relevant lamps carry
out "Electrical Test", steps 17 and 19. The possible causes are as
follows:
Electrical Wiring Diagrams, Troubleshooting & Component Locations
Repair Manual, Electrical Equipment, Repair Group 90.
The battery voltage is insufficient. None of the lamps in the instrument
cluster light up. Check the battery. The ABS warning light -K47- does not light up during the self-test. There
is a short to Ground (GND) in the wiring that controls the ABS/EDL
warning light between terminal 32 of the ABS control module -J104- and
the instrument cluster. This malfunction does NOT influence the control
of the traction control indicator light.
Pa
ge 9 of 27 Electronic Stabilization Pro
gram
(ESP
) Bosch 5.3
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.14
