RS0VL-01
H21589
H03731
A
B
H03732
H03733
RS-44
- SUPPLEMENTAL RESTRAINT SYSTEMSIDE AIRBAG ASSEMBLY
2319 Author: Date:
2004 LAND CRUISER (RM1071U)
REMOVAL
NOTICE:
If the wiring connector of the SRS is disconnected
and the ignition switch is at ON position, DTCs will be
recorded.
Never use the airbag parts from another vehicle.
When replacing parts, replace them with new parts.
1. REMOVE FRONT SEAT
(a) Remove the 4 seat track covers and 4 bolts.
(b) Disconnect the power seat and side airbag connector.
NOTICE:
When handling the airbag connector, take care not to dam-
age the airbag wire harness.
(c) Remove the front seat.
NOTICE:
Be careful not to damage the body.
2. REMOVE HEADREST
3. REMOVE SEATBACK BOARD
Remove the seatback board as shown in the illustration.
HINT:
Remove the seatback board in order ºAº and ºBº as shown in
the illustration.
4. REMOVE SEAT CUSHION OUTER SHIELD
(a) Remove the 4 screws.
(b) Disconnect the connectors as shown in the illustration.
(c) Remove the seat cushion outer shield.
H20963
H19941
H21294
H20961
H04468
RS-46
- SUPPLEMENTAL RESTRAINT SYSTEMSIDE AIRBAG ASSEMBLY
2321 Author: Date:
2004 LAND CRUISER (RM1071U)
10. REMOVE SEATBACK ASSEMBLY
(a) Remove the hog rings.
(b) Disengage the hook as shown in the illustration.
(c) Disconnect the connectors.
(d) Remove the 4 bolts and seatback assembly.
NOTICE:
When handling the airbag connector take care not to dam-
age the airbag wire harness.
(e) Remove the 2 screws and RH reclining adjuster inside
shield, then disconnect the side airbag connector.
NOTICE:
When handling the airbag connector take care not to dam-
age the airbag wire harness.
11. REMOVE ARMREST
12. REMOVE SEATBACK FRAME
(a) Remove the hog rings, clamps and the 2 bolts.
(b) Remove the 2 headrest supports.
(c) Remove the seatback frame from the seatback cover with
pad.
13. REMOVE LUMBER SUPPORT
Remove the 2 bolts and lumber support.
