Page 230 of 395
Cooling  System 
When you decide it’s safe  to  lift  the  hood,  here’s  what 
you’ll  see: 
: CA 
L 
A CAUTION: 
An  electric  engine  cooling  fan  under  the  hood  can 
start up  even  when  the  engine  is not  running and 
can  injure  you.  Keep  hands,  clothing  and tools 
away  from  any  underhood  electric  fan. 
If the  coolant  inside  the  coolant  recovery tank is boiling, 
don’t do anything  else until  it cools  down. 
A. Coolant Recovery Tank 
B. Radiator Pressure  Cap 
C. Electric Engine Fans 
5-17  
     
        
        Page 234 of 395
A CAUTION: I 
Steam  and  scalding  liquids  from  a  hot  cooling 
system  can  blow  out  and  burn you  badly.  They 
are under  pressure,  and  if  you turn the radiator 
pressure  cap 
-- even  a  little -- they  can  come out 
at 
high speed.  Never  turn the cap  when  the 
cooling  system,  including  the  radiator pressure 
cap,  is  hot.  Wait  for the  cooling  system  and 
radiator  pressure  cap  to  cool  if  you  ever  have  to 
turn the  pressure  cap. 
5-21  
     
        
        Page 235 of 395
How to Add Coolant to the Radiator 
1. You can remove the radiator pressure  cap when  the 
cooling system, including  the radiator pressure cap 
and upper radiator hose, is no longer hot. Turn the 
pressure  cap slowly counterclockwise until  it first 
stops. (Don’t press down while turning the 
pressure cap.) 
If you  hear  a hiss,  wait for that  to stop. A hiss means 
there is still  some pressure left. 
2. Then keep turning the pressure  cap,  but now push 
down as 
you turn it. Remove the pressure cap. 
5-22  
     
        
        Page 236 of 395
3. Fill the  radiator  with  the  proper  DEX-COOL@ 
coolant  mixture,  up  to  the  base 
of the  filler  neck. 
(See  “Engine  Coolant”  in  the Index  for more 
information  about  the  proper  coolant  mixture.) 
4. Then  fill the  coolant  recovery  tank  to  the FULL 
COLD mark. 
5. Put  the  cap  back  on  the  coolant  recovery  tank,  but 
leave  the  radiator  pressure 
cap off. 
5-23  
     
        
        Page 237 of 395
6. Start  the  engine  and  let it run  until  you  can  feel the 
upper  radiator  hose  getting  hot.  Watch  out  for the 
engine  cooling  fans. 
7. By  this  time,  the  coolant  level  inside  the  radiator 
filler  neck  may  be  lower.  If the  level 
is lower,  add 
more 
of the  proper DEX-COOL@ coolant  mixture 
through  the  filler neck  until  the  level  reaches  the 
base  of the  filler  neck. 
8. Then  replace  the  pressure  cap. At any time  during 
this procedure  if  coolant  begins  to  flow  out of the 
filler  neck,  reinstall  the  pressure  cap.  Be  sure  the 
arrows 
on the  pressure  cap  line  up like  this. 
5-24  
     
        
        Page 252 of 395

Section 6 Service  and  Appearance  Care 
Here  you  will  find  information  about  the  care  of  your  vehicle.\
 This section  begins  with  service  and fuel information, 
and  then  it 
shows how to  check  important  fluid  and  lubricant  levels.  There  is also technical  information about your 
vehicle, and  a  part  devoted  to its  appearance  care. 
6-2 
6-3 
6-5 
6-6 
6-9 
6-9 
6-13 
6- 17 
6-20 
6-23 
6-26 
6-26 
6-27 
6-28 
6-32 
6-32 
6-40 
Service 
Fuel 
Fuels  in Foreign  Countries 
Filling  Your 
Tank 
Filling  a  Portable  Fuel  Container 
Checking  Things  Under  the  Hood 
Engine 
Oil 
Air  Cleaner 
Automatic  Transaxle  Fluid 
Engine  Coolant 
Radiator  Pressure  Cap 
Power  Steering  Fluid 
Windshield  Washer  Fluid  Brakes 
Battery 
Bulb  Replacement Windshield  Wiper  Blade  Replacement 
6-4 1 
6-49 
6-49 
6-5 
1 
6-52 
6-54 
6-54 
6-56 
6-57 
6-58 
6-64 
6-65 
6-65  6-66 
6-66 
6-66 
Tires 
Appearance  Care 
Cleaning  the  Inside  of  Your  Vehicle 
Care 
of Safety  Belts 
Cleaning  the  Outside  of  Your  Vehicle 
Cleaning  Aluminum  or  Chrome  Wheels 
(If Equipped) 
Sheet  Metal  Damage 
Appearance  Care  Materials  Chart 
Vehicle  Identification  Number 
(VIN) 
Electrical  System 
Replacement  Bulbs 
Capacities  and  Specifications 
Air  Conditioning  Refrigerants 
Engine  Specifications 
Normal  Maintenance  Replacement 
Parts 
Vehicle  Dimensions 
6-1  
     
        
        Page 262 of 395
3800 Series I1 Engine (L36 - Code K) 
When you open  the hood,  you'll  see: 
A.  Engine  Coolant 
Recovery Tank 
B. Battery 
C.  Radiator  Pressure  Cap 
D. Engine  Oil Dipstick 
E. Engine Oil Fill  Cap 
E Automatic Transaxle 
Fluid Dipstick 
G. Brake Master  Cylinder 
H. Air Cleaner 
I. Windshield  Washer 
Fluid Reservoir 
6-11  
     
        
        Page 263 of 395
3800 Supercharged  Engine (L67 - Code 1) (If Equipped) 
When you open the hood, you’ll see: 
A. Engine Coolant 
Recovery  Tank 
B.  Battery 
C.  Radiator Pressure  Cap D. Engine Oil Dipstick G. Brake Master Cylinder 
E.  Engine Oil Fill Cap 
H. Air Cleaner 
E Automatic Transaxle I. Windshield  Washer 
Fluid  Dipstick  Fluid Reservoir