Page 348 of 395

Long  TripLHighway  Maintenance  Schedule 
0 0 
0 
0 Replace air cleaner  filter. 
An  Emission  Control  Service. 
Inspect  fuel tank, cap  and  lines for damage  or  leaks.  Inspect  fuel cap  gasket 
for  any  damage.  Replace 
parts as needed. 
An  Emission  Control  Service. (See  footnote.)..) 
For  supercharged  engines  only:  Check  the  supercharger  oil  level \
 and  add  oil as 
needed  (or  every 
36 months,  whichever  occws fist). See  “Recommended 
Fluids  and  Lubricants”  in 
this section. 
An  Emission  Control  Service. (See  footnote.)..) 
Rotate  tires.  See “Tire  Inspection  and  Rotation”  in the  Index  for proper 
rotation  pattern  and  additional  information.  (See  footnote 
+.) 
(Also  see  footnote ++.) 
97,500 Miles (162 500 km) 
0 Change  engine  oil and  filter  (or  every 12 months,  whichever  occurs  first). 
0 Lubricate  chassis  components  (or  every 12 months,  whichever  occurs  first). 
0 Rotate tires. See “Tire  Inspection  and  Rotation”  in the Index for proper 
An Emission Control Sewice. 
(See  footnote #.) 
rotation  pattern  and  additional  information.  (See  footnote +.) 
7-29  
     
        
        Page 349 of 395
Long Trip/Highway  Maintenance  Schedule 
100,000 Miles (I 66 000 km) 
Inspect  spark  plug  wires. 
An Emission Control Service. 
Replace  spark  plugs. 
An Emission Control Service. 
Change  automatic  transaxle  fluid  and  filter if the vehicle is mainly  driven 
under  one 
or more of these  conditions: 
- In  heavy  city  traffic  where  the  outside  temperature  regularly  r\
eaches 90°F 
- In  hilly  or  mountainous  terrain. 
- When  doing  frequent  trailer  towing. 
- Uses  such as found  in taxi, police  or  delivery  service. 
Ifyou do not use your  vehicle under any of these conditions,  the fluid and 
filter do not require  changing. 
(32°C) or  higher. 
DATE I 
MILEAGE 
150,000 Miles (240 000 km) 
Drain, flush  and  refill  cooling  system  (or every 60 months  since  last  service, 
whichever  occurs  first).  See “Engine  Coolant”  in the  Index  for what  to  use. 
Inspect  hoses.  Clean  radiator,  condenser,  pressure  cap 
and neck.  Pressure  test 
the  cooling  system 
and pressure  cap. 
An Emission  Control Service. 
7-30  
     
        
        Page 351 of 395

At Least Twice a Year At  Least Once a Year 
Restraint  System  Check 
Make  sure  the  safety  belt  reminder  light  and all your 
belts,  buckles,  latch  plates,  retractors  and  anchorages  are  working  properly. 
Look for  any  other  loose or damaged 
safety belt  system  parts.  If  you see anything  that  might 
keep  a  safety  belt  system  from doing  its job,  have it 
repaired.  Have  any  torn  or  frayed  safety  belts  replaced. 
Also look  for any  opened  or broken air bag coverings, 
and  have  them  repaired  or  replaced.  (The  air  bag  system 
does  not  need  regular  maintenance.) 
Wiper  Blade  Check 
Inspect  wiper  blades for wear  or  cracking.  Replace  blade 
inserts  that  appear  worn  or  damaged  or  that  streak  or 
miss areas of the windshield. Also see  “Wiper  Blades, 
Cleaning’’  in  the  Index. 
Automatic  Transaxle  Check 
Check  the  transaxle  fluid  level;  add  if  needed.  See  “Automatic  Transaxle” 
in the  Index.  A  fluid 
loss  may  indicate 
a problem.  Check the system  and 
repair  if  needed. 
Key Lock  Cylinders  Service 
Lubricate  the  key  lock  cylinders  with  the lubricant 
specified  in 
Part D. 
Body Lubrication  Service 
Lubricate  all  body  door  hinges.  Also  lubricate  all hinges 
and  latches,  including  those  for the hood, 
rear 
compartment,  glove box door,  console  door and  any 
folding  seat  hardware. 
Part D tells  you  what  to use. 
More  frequent  lubrication  may  be  required  when 
exposed 
to a corrosive  environment. 
7-32  
     
        
        Page 354 of 395

Part C: Periodic  Maintenance 
Inspections 
Listed  below  are  inspections  and  services  which  should be 
performed at least twice  a  year  (for  instance,  each  spring 
and fall). You  should  let your dealer’s  service  department 
or  other  qualified  service  center  do  these  jobs.  Make 
sure 
any  necessary  repairs are completed  at  once. 
Proper  procedures  to  perform  these  services  may  be 
found 
in a  service  manual.  See  “Service  and  Owner 
Publications”  in  the  Index. 
Steering,  Suspension  and  Front  Drive Axle 
Boot and  Seal  Inspection 
Inspect the front and rear suspension and steering system 
for  damaged,  loose  or  missing parts, signs  of  wear  or  lack 
of lubrication.  Inspect  the  power  steering  lines  and  hoses 
for  proper  hook-up,  binding,  leaks, 
cracks, chafing,  etc. 
Clean  and  then  inspect  the  drive  axle  boot  seals  for 
damage,  tears  or  leakage.  Replace  seals 
if necessary. 
Exhaust  System  Inspection 
Inspect  the  complete  exhaust  system.  Inspect  the  body  near 
the  exhaust  system.  Look  for  broken,  damaged, 
missing or 
out-of-position  parts 
as well as open  seams,  holes,  loose 
connections  or  other  conditions  which  could  cause  a 
heat 
build-up  in  the  floor  pan  or  could  let  exhaust  fumes intw 
the  vehicle. See “Engine  Exhaust”  in  the  Index. 
Engine  Cooling  System  Inspection 
Inspect  the  hoses  and  have  them  replaced if they are 
cracked,  swollen  or  deteriorated.  Inspect all pipes, fittings 
and  clamps;  replace as needed. Clean  the  outside  of  the 
radiator  and 
air conditioning  condenser. To help  ensure 
proper  operation,  a  pressure  test  of  the  cooling  system  and 
pressure cap is recommended at least  once  a year. 
Throttle  System  Inspection 
Inspect  the  throttle  system  for interference  or  binding, 
and  for  damaged  or  missing 
parts. Replace  parts  as 
needed.  Replace  any  components  that  have  high  effort 
or  excessive  wear. 
Do not  lubricate  accelerator and 
cruise  control  cables. 
7-35  
     
        
        Page 355 of 395

Brake  System  Inspection 
Inspect the complete  system.  Inspect  brake  lines and 
hoses for proper  hook-up,  binding,  leaks,  cracks, 
chafing,  etc.  Inspect  disc  brake  pads 
for wear  and  rotors 
for  surface  condition. 
Also inspect  drum  brake linings 
for  wear  and  cracks.  Inspect  other  brake parts, including 
drums, wheel  cylinders,  calipers,  parking  brake,  etc. 
Check  parking  brake  adjustment.  You  may need  to  have 
your  brakes  inspected  more  often  if  your  driving  habits 
or conditions result in frequent  braking. 
CaliperKnuckle  Maintenance  Inspection 
If you  operate  your  vehicle  in a highly  corrosive 
environment,  as  indicated  by  the shaded  areas  on the 
map  following 
this text,  your  vehicle  may  require 
additional  brake  service.  Refer  to the  appropriate 
GM 
Service  Bulletin  for the proper  caliper  inspection 
procedure. 
As necessary,  caliper pins  and  knuckle  brake 
pad  abutments  should  be lubricated  at  every  other  tire 
rotation. 
Also, see  your GM dealer’s  service  department 
or  qualified  service  center  for additional  information. 
7-36  
     
        
        Page 358 of 395
Part E: Maintenance  Record 
After  the  scheduled  services  are  performed,  record  the 
date,  odometer  reading  and  who  performed  the  service 
in  the  boxes  provided  after  the  maintenance  interval. 
Any additional  information  from  “Owner  Checks  and Services”  or  “Periodic  Maintenance”  can  be  added  on 
the  following  record  pages. 
Also, you  should  retain all 
maintenance  receipts.  Your  owner  information  portfolio 
is  a  convenient  place  to  store  them. 
Maintenance  Record 
.,. - 
- ~  ~~ _. 
ODOMETER 
DATE  MAINTENANCE  PERFORMED  SERVICED 
BY READING 
7-39  
     
        
        Page 359 of 395
I 1 
Maintenance  Record 
ODOMETER 
DATE  MAINTENANCE  PERFORMED  SERVICED 
BY READING 
r 
7-40  
     
        
        Page 371 of 395

1998 PONTIAC SERVICE PUBLICATIONS ORDERING INFORMATION 
The  following  publications  covering  the  operation  and  servicing  \
of  your  vehicle  can  be  purchased  by  filling  out the  Service  Publication  Order  Form  in  this  book  and  mailing 
it in  with  your  check,  money  order, 
or  credit  card  information  to  Helm,  Incorporated  (address  below.) \
CURRENT  PUBLICATIONS  FOR 1998 PONTIAC 
SERVICE  MANUALS 
Service  Manuals  have the diagnosis  and  repair  information 
on  engines,  transmission,  axle,  suspension,  brakes, 
electrical,  steering,  body,  etc. 
RETAIL  SELL  PRICE: 
$90.00 
TRANSMISSION,  TRANSAXLE,  TRANSFER  CASE  UNIT  REPAIR  MANUAL 
This  manual  provides  information  on  unit  repair  service 
procedures,  adjustments  and specifications  for  the 
1998 GM transmissions,  transaxles  and  transfer  cases. 
RETAIL  SELL  PRICE: 
$40.00 
SERVICE  BULLETINS 
Service  Bulletins  give technical service  information  needed 
to  knowledgeably  service  General Motors cars and  trucks. 
Each  bulletin  contains  instructions to assist  in the 
diagnosis  and  service  of your  vehicle. 
PLEASE COMPLETE  THE  ORDER FORM SHOWN ON 
THE FOLLOWING  PAGE  AND  MAIL TO: 
Helm, Incorporated EO. Box 07130 0 Detroii, MI 48207 
OWNER’S  INFORMATION 
Owner  publications  are written  directly  for  Owners  and 
intended  to  provide  basic  operational information about  the 
vehicle.  The  owner’s  manual  will include  the Maintenance 
Schedule  for  all models. 
In-Portfolio:  Includes 
a Portfolio,  Owner’s Manual and 
Warranty  Booklet. 
RETAIL  SELL 
PRICE: $15.00 
Without Portfolio: Owner’s  Manual only. 
RETAIL  SELL  PRICE: 
$10.00 
CURRENT 4% PAST  MODEL  ORDER  FORMS 
Service  Publications  are available for  current  and  past 
model  GM vehicles. 
To request  an order  form,  please 
specify  year  and  model  name  of the  vehicle. 
OR  ORDER TOLL FREE: 1-800-78214356 
Monday-Friday 800 AM - 6:OO PM Eastern lime 
For Credit Cad Orders Only (VISA-MasterCard-Discover)