7A–198 AUTOMATIC TRANSMISSION (AW30-40LE)
246RY00001
252RY00014
241RY00003
Install the (stepped ring) flange with the flat side of the
flange facing the disc.
Install the snap ring.
32.Race
Coat the race with petroleum jelly and install it onto the oil
pump.
33.Oil pump
Coat the O–ring with ATF and install it around the pump
body.
Place the oil pump through the input shaft, and align the
bolt holes of the pump body with the transmission case.
Hold the input shaft, and lightly press the oil pump body to
slide the oil seal rings on the stator shaft through the direct
clutch drum.
NOTE:
Do not push on the oil pump strongly or the oil seal ring
will stick to the direct clutch drum.
Install the seven bolts.
Check input shaft rotation
Make sure the input shaft rotates smoothly. Race diameter (Reference) mm (in.)
Inside Outside
Race 28.1 (1.106) 47.3 (1.862)
Nꞏm(kgꞏm / lbꞏft)
Torque 22 (2.2/16)
