1998 Lexus LS400 lock

COMFORT ADJUSTMENT
100To install an anchor bracket, use an 8 mm X 30 mm X 1.25 mm
coarse thread metric bolt and a 15 mm (0.6 in.) spacer for the outer
anchors or a 10 mm (0.4 in.) spacer for the center anchor. Note that
the bolts accompanying many child restraint systems are not metric.
You can damage the anchor nuts on your vehicle if you force bolts
with different thread into the anchor nuts.
For instructions about how to install the anchor bracket, see ”Top
strap anchors and locations”.
If your child restraint system does not provide any of the necessary
parts, you can purchase the following items from your Lexus dealer.
CRS installation kit (Part No. 0473122012)
contains 1 bolt, 3 types of spacer and 1 locking clip.
Bolt (Part No. 9151160830)Types of child restraint system
Child restraint systems are classified into the following 3 types
depending on the child’s age and size.
(A) Infant seat
(B) Convertible seat
(C) Booster seat
Install the child restraint system following the instructions provided
by its manufacturer.
(A) Infant seat
16L1572

COMFORT ADJUSTMENT
102
16L180-4
CAUTION
Never put a rearfacing child restraint system in the front seat
because the force of the rapid inflation of the front passenger
airbag can cause death or serious injury to the child.
16L1602
1. Run the lap and shoulder belt through or around the infant seat
following the instructions provided by its manufacturer and
inserting the tab into the buckle taking care not to twist the belt. Keep
the lap portion of the belt tight.
CAUTION
After inserting the tab, make sure the tab and buckle are
locked and that the lap and shoulder portions of the belt are
not twisted.
Do not insert coins, clips, etc. in the buckle as this may
prevent you from properly latching the tab and buckle.
If the seat belt does not function normally, immediately
contact your Lexus dealer. Do not use the seat until the seat
belt is fixed. It cannot protect your child from injury.

COMFORT ADJUSTMENT
103
16L1612
2. Fully extend the shoulder belt to put it in the lock mode. When
the belt is then retracted even slightly, it cannot be extended.
To hold the infant seat securely, make sure the belt is in the lock mode
before letting the belt to retract.
16L1622
3. While pressing the infant seat firmly against the seat cushion and
seatback, let the shoulder belt retract as far as it will go to hold the
infant seat securely.

COMFORT ADJUSTMENT
106
16L146
Move seat fully back
A forwardfacing child restraint system should be put on
the front seat only when it is unavoidable. Always move the
seat as far back as possible, because the force of a deploying
airbag could cause death or serious injury to the child. Do
not allow the child to lean over the front door or around the
front door even if the child is seated in a child restraint
system. It is dangerous if the side airbag inflates, and the
impact could cause death or serious injury to the child.
16L1651
1. Run the lap and shoulder belt through or around the convertible
seat following the instructions provided by its manufacturer and
inserting the tab into the buckle taking care not to twist the belt. Keep
the lap portion of the belt tight.
CAUTION
After inserting the tab, make sure the tab and buckle are
locked and that the lap and shoulder portions of the belt are
not twisted.
Do not insert coins, clips, etc. in the buckle as this may
prevent you from properly latching the tab and buckle.
If the seat belt does not function normally, immediately
contact your Lexus dealer. Do not use the seat until the seat
belt is fixed. It cannot protect your child from injury.

COMFORT ADJUSTMENT
107
16L1661
2. Fully extend the shoulder belt to put it in the lock mode. When
the belt is then retracted slightly, it cannot be extended.
To hold the convertible seat securely, make sure the belt is in the lock
mode before letting the belt to retract.
16L1671
3. While pressing the convertible seat firmly against the seat
cushion and seatback, let the shoulder belt retract as far as it will go
to hold the convertible seat securely.

COMFORT ADJUSTMENT
110
16L1702
1. Sit the child on a booster seat. Run the lap and shoulder belt
through or around the booster seat and child following the
instructions provided by its manufacturer and insert the tab into the
buckle.
Make sure the shoulder belt is correctly across the child’s shoulder
and that the lap belt is positioned as low as possible on child’s hips.
See ”Seat belts” on page 80 for details.
CAUTION
Always make sure the shoulder belt is positioned across the
center of child’s shoulder. The belt should be kept away
from child’s neck, but not falling off child’s shoulder.
Failure to do so could reduce the amount of protection in an
accident and cause serious injuries in a collision.
Highpositioned lap belts and loosefitting belts both could
cause serious injuries due to sliding under the lap belt
during a collision or other unintended result. Keep the lap
belt positioned as low on hip as possible.
For child’s safety, do not place the shoulder belt under
child’s arm.
After inserting the tab, make sure the tab and buckle are
locked and that the lap and shoulder portions of the belt are
not twisted.
Do not insert coins, clips, etc. in the buckle as this may
prevent you from properly latching the tab and buckle.
If the seat belt does not function normally, immediately
contact your Lexus dealer. Do not use the seat until the seat
belt is fixed. It cannot protect your child from injury.

THEFT DETERRENT
117
THEFT DETERRENT SYSTEM
To deter theft of the vehicle, this system is designed to give an
alarm if any of the doors, trunk or hood is forcibly unlocked or
the battery terminal is disconnected and then reconnected while
the vehicle is locked.*
NOTE: *The system operating condition can be changed. Ask
your Lexus dealer for details.
The alarm blows the horn intermittently and flashes the headlights,
tail lights and other exterior lights.
17L001
Setting the system
1. Turn the ignition key to the ”LOCK” position and remove it.
2. Close and lock all the doors, trunk and hood using an ignition
key or wireless remote control.If you lock them with wireless remote control, the turn signals flash
once.* If you do not want to make them flash, consult with your
Lexus dealer.
NOTE: *The turn signals can be set not to flash. Ask your Lexus
dealer for details.
The indicator light will come on when all the doors, trunk and hood
are closed and locked.
3. After 30 seconds, the indicator flashes and the system is set.
Cancelling the system
When you unlock any door or trunk using an ignition key or
wireless remote control, the system is cancelled.
If you unlock any door or trunk with wireless remote control, the turn
signals flash twice.* If you do not want to make them flash, consult
with your Lexus dealer.
NOTE: *The turn signals can be set not to flash. Ask your Lexus
dealer for details.
Activating the system
The alarm sounds for 60 seconds if any of the following are operated:
Unlocking any door or trunk without using an ignition key or
wireless remote control.
Opening the hood forcibly.
Reconnecting the battery.

THEFT DETERRENT
118If any door is unlocked and the ignition key is not in the ignition
switch during the alarm sounding, its door is automatically locked.
To stop the alarm: Use either of the following methods.
Unlock the door or trunk using an ignition key or wireless remote
control.
Turn the ignition switch on.
Testing the system
1. Open all the windows.
2. Set the system as described above.
The front doors should be locked with the ignition key or wireless
remote control. Be sure to wait until the indicator light starts
flashing.
3. Unlock one of the doors from the inside.
The system should activate the alarm.
4. Unlock any of the doors with a key or the wireless remote
control to cancel the system.
5. Repeat this operation for the other doors and hood.
When testing the hood, also check that the system is activated when
the battery terminal is disconnected and then reconnected.
If the system does not work properly, have it checked by your Lexus
dealer.
NOTICE
Disconnecting the battery may result in the erasure of
information you have set in the computer memory. After
reconnecting the battery, check that the memorized data has
been retained. If it has been erased, input it into the computer
once more.