1998 ISUZU TROOPER RR window Motor

8J±2EXTERIOR/INTERIOR TRIM
Quarter Flipper Glass Assembly (S´W´B) 8J±33. . .
Quarter Flipper Glass Assembly and
Associated Parts 8J±33. . . . . . . . . . . . . . . . . . . . . .
Removal 8J±33. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 8J±33. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tailgate Trim Panel (LH) 8J±34. . . . . . . . . . . . . . . . .
Tailgate Trim Panel (LH) and Associated
Parts 8J±34. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Removal 8J±34. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 8J±35. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tailgate Trim Panel (RH) 8J±36. . . . . . . . . . . . . . . . .
Parts Location 8J±36. . . . . . . . . . . . . . . . . . . . . . . .
Removal 8J±36. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 8J±36. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Luggage Floor Box 8J±37. . . . . . . . . . . . . . . . . . . . . .
Luggage Floor Box and Associated Parts 8J±37.
Remove 8J±37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 8J±37. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rope Hook Set 8J±37. . . . . . . . . . . . . . . . . . . . . . . . . Rope Hook Set and Associated Parts 8J±37. . . .
Removal 8J±37. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 8J±37. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power Door Mirror System 8J±38. . . . . . . . . . . . . . .
General Description 8J±38. . . . . . . . . . . . . . . . . . . . . .
Door Mirror Switch Assembly (Control Switch, Fold-
ing Switch and Defogger Switch) Removal 8J±38
Installation 8J±38. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power Door Mirror 8J±38. . . . . . . . . . . . . . . . . . . . . . .
General Description 8J±38. . . . . . . . . . . . . . . . . . . .
Removal and Installation 8J±38. . . . . . . . . . . . . . .
Power Window System 8J±39. . . . . . . . . . . . . . . . . .
General Description 8J±39. . . . . . . . . . . . . . . . . . . . . .
Power Window Switch Removal and
Installation 8J±39. . . . . . . . . . . . . . . . . . . . . . . . . . .
Power Window Motor Removal and
Installation 8J±40. . . . . . . . . . . . . . . . . . . . . . . . . . .
Main Data and Specifications 8J±41. . . . . . . . . . . . .
Service Precaution
WARNING: I F S O E Q U IPPED WITH A
SUPPLEMENTAL RESTRAINT SYSTEM (SRS),
REFER TO THE SRS COMPONENT AND WIRING
LOCATION VIEW IN ORDER TO DETERMINE
WHETHER YOU ARE PERFORMING SERVICE ON OR
NEAR THE SRS COMPONENTS OR THE SRS
WIRING. WHEN YOU ARE PERFORMING SERVICE
ON OR NEAR THE SRS COMPONENTS OR THE SRS
WIRING, REFER TO THE SRS SERVICE
INFORMATION. FAILURE TO FOLLOW WARNINGS
COULD RESULT IN POSSIBLE AIR BAG
DEPLOYMENT, PERSONAL INJURY, OR
OTHERWISE UNNEEDED SRS SYSTEM REPAIRS.
CAUTION: Always use the correct fastener in the
proper location. When you replace a fastener, use
ONLY the exact part number for that application.
ISUZU will call out those fasteners that require a
replacement after removal. ISUZU will also call out
the fasteners that require thread lockers or thread
sealant. UNLESS OTHERWISE SPECIFIED, do not
use supplemental coatings (Paints, greases, or other
corrosion inhibitors) on threaded fasteners or
fastener joint interfaces. Generally, such coatings
adversely affect the fastener torque and the joint
clamping force, and may damage the fastener. When
you install fasteners, use the correct tightening
sequence and specifications. Following these
instructions can help you avoid damage to parts and
systems.

EXTERIOR/INTERIOR TRIM8J±39
Power Window System
General Description
The circuit consists of the starter switch, (door lock &)
power window switch for each of the front windows,
power window switch for rear windows and power window
motors.
When the starter switch is turned on, the battery voltage is
applied to each of the power window switches through the
circuit breaker and the power window relay on the circuit.
The ªDownº switch of the driver's power window switch
has a built-in function which can be operated by just
touching it.
Accordingly, the window will roll down automatically by
just setting the switch to the ªAUTOº position.
When the driver's power lock switch at the driver side is
depressed, the power source to the passenger's power
window switches are shut off. So, even if these switches
are operated, the power window motor will not operate.
Power Window Switch Removal and
Installation
Driver Seat Side
Removal
1. Disconnect the battery ground cable.
2. Remove the switch(1).

Pull out the switch by pushing the spring with the tip
of a screwdriver.

Disconnect two connectors.
825RS052
Installation
To install, follow the removal steps in the reverse order.
Front Passenger Seat Side
Removal
1. Disconnect the battery ground cable.2. Remove the switch(1).

Pull out the switch by pushing the spring with the tip
of a screwdriver.

Disconnect the connector.
825RW046
Installation
To install, follow the removal steps in the reverse order.
Rear-Left and Right Sides
Removal
1. Disconnect the battery ground cable.
2. Remove the switch(1).

Pull out the switch by pushing the spring with the tip
of a screwdriver.

Disconnect the connector.
825RS057
Installation
To install, follow the removal steps in the reverse order.

8J±40EXTERIOR/INTERIOR TRIM
Power Window Motor Removal and
Installation
Driver Seat Side
Removal
1. Disconnect the battery ground cable.
2. Remove the window regulator assembly (1).

Refer to the Window Regulator and Glass removal
steps in Body Structure section.
3. Remove the power window motor(2).

Remove three screws.
CAUTION: W h e n r e m o v i n g t h e m o t o r f r o m t h e
regulator(1), be careful not to get injured by the
strong repellent force of the regulator spring.
631RS018
Installation
To install, follow the removal steps in the reverse order.
Front Passenger Seat Side
Removal
1. Disconnect the battery ground cable.
2. Remove the window regulator assembly (1).

Refer to the Window Regulator and Glass removal
steps in Body Structure section.
3. Remove the power window motor(2).

Remove three screws.
CAUTION: W h e n r e m o v i n g t h e m o t o r f r o m t h e
regulator(1), be careful not to get injured by the
strong repellent force of the regulator spring.
631RS015
Installation
To install, follow the removal steps in the reverse order.
Rear-Left Side
Removal
1. Disconnect the battery ground cable.
2. Remove the rear window regulator assembly.

Refer to the Rear Window Regulator and Glass
removal steps in Body Structure section.
3. Remove the power window motor(1).

Remove four screws.
651RW014
Installation
To install, follow the removal steps in the reverse order.
Rear-Right Side
Removal and Installation
Refer to the Rear Power Window Motor-Left Side removal
and installation steps in this section.