1998 CHEVROLET VENTURE lock

Keyless Entry System (Option)
If your vehicle has this option, you can lock and
unlock your doors or unlock your liftgate from about
3 feet (1 m) up to 30 feet (9 m) away using the remote
keyless entry transmitter supplied with your vehicle.
' UN '
a
E
Your keyless entry system operates on a radio frequency subject
to Federal Communications Commission (FCC)
Rules and with Industry Canada.
This device complies with
Part 15 of the FCC Rules.
Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation. This device complies with RSS-210
of Industry Canada.
Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation of
the device.
Changes or modifications to this system by other than
an authorized service facility could void authorization
to use this equipment.
This system has
a range of about 3 feet (1 m) up to 30 feet
(9 m). At times you may notice a decrease in range. This
is normal for any remote keyless entry system. If the
transmitter does not work or if you have to stand closer
to your vehicle for the transmitter to work,
try this:
Check to determine if battery replacement or
synchronization is necessary.
See the instructions
that follow.
Check the distance. You may be too far from your
vehicle. You may need
to stand closer during rainy
or snowy weather.
Check the location. Other vehicles or objects may
be blocking the signal. Take a few steps
to the left or
right, hold the transmitter higher, and try again.
0 If you're still having trouble, see your dealer or a
qualified technician for service.
2-8
ProCarManuals.com

Operation Remote Lock Confirmation
Remote Driver’s Door and
All Door Unlock
When you press UNLOCK on the remote keyless entry
transmitter, only the driver’s door will unlock. If you
press UNLOCK again within five seconds, all the doors
and the liftgate will unlock. If you would like all the
doors to unlock the first time you press UNLOCK,
see “Locks and Lighting Choices” in the Index.
If your vehicle is equipped with the Content
Theft-Deterrent system, the UNLOCK button on
the remote keyless entry transmitter will disarm the
system (see “Content Theft-Deterrent” in the Index
for more details).
Remote All Door Lock
To lock all doors, press LOCK on the remote keyless
entry transmitter (see “Power Door Locks” in the
Index for more details on
the power door lock
features). If your vehicle is equipped with the Content
Theft-Deterrent system, the LOCK button may
arm
the system (see “Content Theft-Deterrent” in the
Index for more details). When you use the
remote keyless entry transmitter to
lock your vehicle, your parking lamps will flash briefly
to let you know the command has been received. If you
press the LOCK button again, within five seconds, the
horn will sound briefly and the parking lamps will flash
to let you know the vehicle is already locked.
If you would like to change
the way the parking lamps
and horn operate with Remote Lock Confirmation, see
“Locks and Lighting Choices” in the Index.
Remote Unlock Confirmation
When you use your remote keyless entry transmitter to
unlock your vehicle or to operate the power sliding door
(if equipped), your parking lamps will flash briefly to
let you
know the command was received.
If you would like to change the way the parking lamps
operate with Remote Unlock Confirmation, see “Locks
and Lighting Choices” in the Index.
Remote Alarm
When you press the horn button on the remote keyless
entry transmitter, your vehicle’s parking lamps will
flash and the horn will sound. This will allow you to
attract attention,
if needed.
2-9
ProCarManuals.com

I
Erp LOCK
If you have the optional
power sliding door (see
“Power Sliding Door”
later in this section), your
remote transmitter will
have a button that has
a
van symbol on it. Press
it to open or close the
sliding door. Each remote keyless entry transmitter is coded to
prevent another transmitter from unlocking your vehicle.
If a
transmitter is lost or stolen, a replacement can be
purchased through your dealer. Remember to bring any remaining transmitters with you when you go
to your
dealer. When the dealer matches the replacement
transmitter to your vehicle, any remaining transmitters
must also be matched. Once your dealer has coded the new transmitter, the lost transmitter will not unlock your
vehicle. Each vehicle can have only four transmitters
matched to it.
If the sliding door is locked, first unlock all doors (see
“Remote Driver’s Door and
All Door Unlock” earlier
in this section), then press the van symbol to open the sliding door. Press the van symbol again to close the
sliding door.
You can operate the power sliding door with the remote
transmitter only when the power sliding door override
switch on the overhead console is disabled. See
your dealer to match transmitters to another vehicle.
Battery Replacement
Under normal use, the battery in your remote keyless
entry transmitter should last about two years.
You can tell the battery is weak if the transmitter won’t
work at the normal range in any location. If you have to
get close to your vehicle before the transmitter works,
it’s probably time to change the battery.
2-10
I
I I
ProCarManuals.com

5. Check the transmitter operation. If needed, follow
the instructions on resynchronizing your remote
transmitter.
Resynchronizing Your Remote Transmitter
Your remote keyless entry system uses a continually
changing code for increased security. Normally, the
receiver in your vehicle will keep track of this
changing code.
Loss of synchronization will occur if the transmitter
is activated more than
256 times while out of range
of the vehicle.
Loss of synchronization will occur after the battery
replacement if the transmitter is immediately activated
more than
16 times while out of range of the vehicle.
If your remote keyless entry transmitter has stopped
working,
you may need to resynchronize the transmitter
to the vehicle receiver. To do this, press the
LOCK and
UNLOCK buttons together and hold for at least seven
seconds or until the horn sounds if equipped with Content
Theft-Deterrent. Check the transmitter operation.
Switchbanks
There are two sets of switchbanks located in the front
of the vehicle. The switches will vary with the options that are
on your vehicle. It is useful to become familiar
with them since they are used frequently while
operating the vehicle.
Overhead Console Switchbank
This switchbank is located in the overhead console.
The switches that
you may find in this switchbank are
the Interior Lights Override, Power Sliding Door
Override, Power Sliding Door and the Power Rear
Quarter Windows. If your vehicle does
not have some
of
the options controlled by these switches, there will
be a blank button in its place.
For more information, please see each
of these features
in the Index.
ProCarManuals.com

Sliding Door Lock
Lock the sliding door from inside the vehicle by moving
the manual locking lever down. Unlock it by moving the
lever up.
Power Sliding Door (Option)
With this option, you can open and close the sliding
door with the switches inside your vehicle. If
you have
the optional remote keyless entry system,
you can also
operate the power sliding door with your remote transmitter. See “Keyless Entry System” in the Index.
TION:
Leaving young children or pets unattended in
your vehicle can be dangerous. They could
operate the power sliding door.
A child or others
could be injured.
Do not leave children or pets
unattended in your vehicle.
With power door locks, the sliding door lock has a delay
feature.
See “Power Door Locks” and “Locks and
Lighting Choices” in the Index.
2-14
ProCarManuals.com

7
3
7
C
C
C
2-16
To open or close the sliding door, press and release one
of the two power door switches.
One is mounted on the wall,
just in front of the
passenger’s side sliding door. The other switch is
located in the overhead console switchbank.
The sliding door must be unlocked for it to operate.
The key does not have to be in the ignition.
To help
avoid accidental operation of the sliding door, disable
the power sliding door by pushing the power sliding
door override switch. When the key is in the ignition
in RUN, the power
sliding door will only open if the transaxle is in
PARK (P). The transaxle does not have to be in
PARK
(P) to close the door.
If the override feature is not enabled and the power
sliding door is open or in the process
of closing when
you shift out of PARK (P), a buzzer will sound. This is a
warning that the sliding door is not completely closed.
If you shift the transaxle out of PARK (P) and
accelerate before the power sliding door latches
closed, the door may reverse to the open position,
A child or others could fall out of the vehicle and
be injured. Always make sure the power sliding
door is closed and latched before
you drive away.
ProCarManuals.com

Resetting the Power Sliding Door
The power sliding door may operate incorrectly or not
at all because of the following conditions:
A low voltage or dead battery,
Disconnecting the battery or
If the IGN 1, B/U LAMP, RADIO or PWR
SEAT/PSD fuse is removed or blown.
See “Fuse Panel” in the Index for more information
about your fuse panel.
If any of these conditions occur, the power sliding door
will need to be reset.
To do this, follow the directions
listed here. It will be easier if you read through them
once before beginning this procedure.
1. Check to be sure the power sliding door is unlocked
2. Turn the ignition switch to OFF.
and securely closed.
3. Enable the power sliding door override feature.
4. RI .ove the RADIO fuse from the underhood fuse
anu relay center. Leave
it out for 30 seconds.
5. Reinstall the fuse and wait 10 seconds.
6. Disable the power sliding door override feature.
7. Push either of the power door buttons to open the
8. Wait five seconds and close the door by pushing
9. Wait five seconds and repeat Steps 7 and 8.
If the door does not rest in the fully open position
after repeating Step
7, repeat Steps 7 and 8 again. If
the door still does not operate correctly, see your
dealer for service. power sliding door.
either power door button.
Sliding Door Security Lock
Your vehicle is equipped with a sliding door security
lock that helps prevent young children or other
passengers from opening the sliding door by using the
inside door handle. This lock is on both doors if your
vehicle has the dual sliding doors.
If
you have the optional power sliding door, you can
override the security lock by pressing either power
door switch when
the power sliding door override
feature
is disabled. See “Power Sliding Door” earlier
in the section.
The security lock lever
1s located on the inside of the
sliding door, on the front edge of the door. To access the
lever, open the sliding door. Use the security lock label
on the edge of the door as a guide.
ProCarManuals.com

To use the security lock,
move the security lock lever
all the way up and close
the
door from the outside. You
should let adults and older children know how the
security lock works, and how to cancel the lock. If you
don’t, adults
or older children who ride in the rear won’t
be able to open the sliding door from the inside when the security lock feature is in use.
Canceling the Sliding Door Security Lock
1. Unlock the sliding door and open the door from
the outside.
2. Move the security lock lever all the way down.
The sliding door lock will now work normally.
If you have the optional power sliding door, disable the
power sliding door by pushing the override switch on
the overhead console. The power sliding door cannot be
opened from the inside when this feature is in use.
If you want to open the sliding door when the security
lock is on, unlock the sliding door and open the door
from the outside.
If you have the optional power sliding door, disable the
power sliding door override feature. Press either power door switch.
Liftgate
To unlock the liftgate from the outside, turn the key in
the cylinder to the right. To lock the liftgate using the
key, turn the key to the left.
Open the liftgate using the handle above the license
plate. Once slightly opened, the liftgate will rise by
itself. Lamps in the rear of the vehicle will come on,
illuminating the rear cargo area (see “Interior Lamps”
in the Index).
2-20
ProCarManuals.com