1998 BUICK PARK AVENUE bulb

E a bulb is burned out, replace it to help avoid itr~
accident. If the mows don’t go on at all when you
signal a turn, check the €use (see “‘Fuses md Circuit
Breakers” in the Index) and f~r burned-out bulbs.
If you have a trailer towing option with added wiring for
the trailer lamps, the signal indicator will flash even if a
turn signal bulb is burned aut. Check the front and rea
turn signal lamps regularly to make sure they are
workirzg. Note: You do not need to add a
different Basher.
If your turn signal is left on ~CZ more than 3/4 of a mile
(1.2 h), a chime will sound ai each flash of the turn
signal. To turn df the chime, move the turn signal lever
to the dTposition.
When the high beams are
on, a light the instrdment
panel wiil ~SQ be on. if
This feztuse lets you use your high-beam headlamps to
signal a driver in front of you that you want to pass. It
works even if your headamps xe 3ff.
To use it, pull the turn signal lever toward you, but not
so far that you hear a click.
If your headlamps are off or on low beam, your
high-beam headlamps will turn on. They’ll stay QPI as
long as you hold the Iever toward you and the
high-beam indicator on the dash will come on. Release
the Iever to turn the high-beam headlamps off.
ProCarManuals.com

6-2
6- 3
4-9
6-12
4-17
6- 19
4-20
6-23
5-27
6-28
6-29
4-32
6-33
6-45
6-46
Service
Fuel
Checking Things Under the Hood
Engine Oil
Air Cleaner
Supercharger
Oil
Automatic Transaxle Fluid
Engine Coolant
Radiator Bressure Cap
VVindskieTd Washes Fluid
Br&es
3 attery
Bulb Replacement
Windshield Wiper Blade Replacement
Tires Appearance
Care
Cleaning the Inside QE Y(.w VehicEe
Cleaning
the Outside of Your Vehicle
Underbody Maintenance
Chemical
Paint Spotting
Appearance Care Materials Chart
Vehicle icientifkation Number (VIN)
Electrical System
Removing the Rear Seat Cushion
Replacement Bulbs
Capacities and Specifications
Air Conditioning Re€rigerants
Engine Specifications
Vehicle Dimensions
Normal Maintenance Replacement 'Parts
ProCarManuals.com

If you're not going to drive your vehicle for 25 days
or mcre, remove the black, negative (-) cable from
the battery. This will help keep your battery from
running down.
Bse$tesies have acid that can burn you and gas
that can explode. You ran be badly hurt if JW.I
aren't careful. See "Jump Starting" in the Index
for tips on working around a battery without
getting
hurt.
Contact yoirr dealer to Iem how to prepzre your vehicle
for longer storage periods.
Also, for your audio system, see 'Theft-Deterrent
Feature"
in the Index.
Halogen bulbs have pressurized g;as inside and
can burst if YOU drop or scratch the bulb. You or
others could be injured. Be sure to read and
follow the instructions on the btrbb package.
ProCarManuals.com

2. Pull the headlamp away from the car.
3. Remove the bulb socket
by
turning it onequarter
of a tuna to the left,
while pressing it firmly,
then pull it out. Note:
YQU can use pliers to
remove the bulb socket
if you are unable to do Et
by hand.
.. I '.
..
4. Remove the wire connector from the bulb by
lifting the EQC~ tab ad pulling it away from the
plastic base.
ProCarManuals.com

5. Reverse the above steeps to reassemble ahe Bamp
assembly. The
fiont turn signal bulbs can be accessed by
removing
the headlamp assembly as described in
the previous procedure.
Once
the headlamp
assembly
has been removed,
reach
down from the top
of the vehicle and, while
pressing the
lock tab on the
socket,
turn the socket
onequarter
of a turn and
pull it out.
When reassembling the lamp, make sure
to align
the pin at the outboapd edge of the headlamp
assembly to
the plastic retainer at the outboard
edge
of the vehicle. Remove the
old bulb
by pulling it straight out of the
socket. Replace the bulb
md turn the bulb assembly
back into place.
ProCarManuals.com

For the type of buib to use, see "Replacement Bulbs"
in the Index.
2. Unhook the cargo net
from the cargo net
retainer and remove the
retainer by turning it tc
the left.
3. Pull back the trunk trim panel.
ProCarManuals.com

4. Beneath the trim panel are three nuts that secure the
taillamp assembly. Remove these nuts with
a BO mm
wrench. Remove the nuts from only the side you
want
to access. The turn signal and a stoplamp can
now be accessed.
5. Pull the t~illmp assembly away from the vehicle.
6. Remove the bulb socket
assembly by turning
the
socket one-quarter of a
tun to the lek and
ProCarManuals.com

7. Once the socket has
been removed,
pull
the bulb straight out
to remove
it from
the socket.
8. Reverse the above steps to replace the
taiUamp assembly.
Turn
lamps, stoplamps and back-up bulbs are located
bekind the taillamp assembly along the trunk lid. The
following instructions explain how to access these bulbs.
ProCarManuals.com