Page 7 of 212
Indicator symbols on the instrument panel
6
4WD
Anti-lock  brake system warning light*
Brake system warning light* Seat belt reminder light*
Discharge warning light*
Low oil pressure warning light*
Malfunction indicator light*
Low fuel level warning light*
SRS airbag warning light* Automatic transmission fluid 
temperature warning light*
Turn signal indicator lights 
Headlight high beam indicator light
Over-drive  indicator light
Unengaged Parkº warning light* Low windshield washer fluid level warning light*
4WDº indicator light
Automatic transmission indicator lights
Cruise control indicator light
The indicators marked with * are service reminder indicators. 
For details, see Service reminder indicators and warning 
buzzersº in Chapter 1-5. 
     
        
        Page 10 of 212

9
CAUTION!
Before driving, be sure that the 
doors are closed and locked, espe- 
cially when small children are in the
vehicle. A long with the proper use of
seat belts, locking the doors helps
prevent the driver and passengers
from being thrown out from the ve- 
hicle during an accident. It also 
helps prevent the doors from being
opened unintentionally.
The windows can be operated with the 
switch on each door. 
The power windows work when the igni- tion  switch is in the ONº position. Howev-
er, if both doors are closed, they work for 60 seconds even after the ignition switch 
is turned off. They stop working when ei-ther door is opened. 
OPERATING THE DRIVER'S WINDOW 
Use the switch on the driver's door. 
Normal operation:  The window moves
as long as you hold the switch. 
To open: Lightly push down the switch.
To close: Pull up the switch.Automatic operation (to open only): 
Push the switch completely down and 
then rel ease it. The window will fully open.
To stop the window partway, lightly pull the 
switch up and then release it.
Power windows    
     
        
        Page 13 of 212
12
REMOVAL 
1. Open the tailgate to the anglewhere you can release the support 
brackets from the lugs on bothsides.
2. Open the tailgate to about 30 5 from
vertical and pull up  the right side of
the tailgate to unhook the rightside.
3. Slide the tailgate a little to the right to unhook the left side.
To install the tailgate, follow the removal 
procedure in revers order. 
After closing the tailgate, try pulling it to- 
ward you to make sure it is securely closed. 
We recommend you keep the tailgate 
closed when not in use.
 
Before unhooking the tailgate,fold the support brackets.
 Make sure the support brackets
are securely latched on both sidepanels when installing the tail-
gate.
NOTICE
To open the hood, do the following. 
1. Pull the hood lock release lever.
The hood will spring up slightly.
Hood   
     
        
        Page 15 of 212