50
For high beam, push the lever away 
from you. Pull it toward you for low low
beam. For the headlight flasher, pull 
the lever all the way back  and release. 
A blue light in the instrument panel indi- 
cates high beam is on. 
The headlight flasher works even when 
the headlight switch is off.For signaling a turn, move the lever up 
or down in the conventional manner The key must be in the ONº position. 
The turn signal is self-cancelling after a 
turn, but after a lane change, you may 
have to cancel it by hand. You can also 
signal a lane change by moving the turn 
signal lever partway and holding it there. 
If the green light in the instrument panel 
flashes faster than normal, it indicates 
that the front or rear turn signal bulb has burned out.To turn on the emergency flashers, 
push the switch. All the turn signal lights will flash.
Turn on the emergency flashers to warn other drivers if your vehicle must be 
stopped  where it might be a traf fic hazard.
Always pull as far off the road as possible. 
The turn signal light switch will not work 
when the emergency flashers are operat-ing.
Emergency flashers