1997 TOYOTA SUPRA service schedule

FOR THE TOYOTA DEALER
COLLISION REPAIR INFORMATION
TITLE: PAINT VENDOR TECHNICAL PAGE 1 of 1
SERVICE SUPPORT
SECTION: GENERAL INFORMATION BULLETIN #77
MODELS: ALL
DATE: MARCH 1997
For your reference, we are providing the following technical service telephone numbers
and support features offered by your respective paint supplier. Please contact the suppliers
directly to receive important technical and refinish product information.
BASF
SHERWIN±WILLIAMS
800±825±3000 800±798±5872 (For Martin Senour 800±526±6704)
8:00 AM to 8:00 PM EST 8:30 AM to 5:00 PM EST

technical information
technical applications assistance

product information
color match assistance

color information
technical training, locations/dates
DUPONT
SIKKENS
800±222±5225 800±521±9222
8:00 AM to 4:30 PM EST 8:00 AM to 6:00 PM EST

technical service
technical support

paint system selection
color information

training information
ICI AUTOCOLOR
SPIES±HECKER
800±647±6050 800±447±7437
8:00 AM to 5:30 PM EST 8:00 AM to 6:00 PM EST

technical product/process information
technical information

color information
color information
PPG
STANDOX

technical service (216) 572±6111 800±551±9296
8:00 AM to 6:00 PM EST 8:00 AM to 7:00 PM EST

color library (216) 572±6100
product technical issues ± x3108
8:00 AM to 6:00 PM EST
color issues ±x3109 or 3110

training info./schedules
training issues ± x3139 or 3118
(800) 450±2654 24±hour service
Information and specific technical procedures for the repair and refinish of Toyota vehicles
may be obtained by attending a Toyota Collision Repair and Refinish Training course.
Toyota courses are designed to enhance the skills of collision repair technicians and
provide detailed information in order to simplify and improve the quality of each repair.
Courses are taught at each Toyota Collision Repair and Refinish Training Center.
For additional information about Toyota Collision Repair and Refinish Training courses and
a course schedule, please contact your local Toyota regional office.

MA01D-01
- MAINTENANCEOUTSIDE VEHICLE
MA-1
38 Author
: Date
:
1997 SUPRA (RM502U)
OUTSIDE VEHICLE
GENERAL MAINTENANCE
These are maintenance and inspection items which are considered to be the owner's responsibility.
They can be done by the owner or they can have them done at a service shop.
These items include those which should be checked on a daily basis, those which, in most cases, do not
require (special) tools and those which are considered to be reasonable for the owner to do.
Items and procedures for general maintenance are as follows.
1. GENERAL NOTES

Maintenance items may vary from country to country. Check the owner's manual supplement in which
the maintenance schedule is shown.

Every service item in the periodic maintenance schedule must be performed.

Periodic maintenance service must be performed according to whichever interval in the periodic main-
tenance schedule occurs first, the odometer reading (miles) or the time interval (months).

Maintenance service after the last period should be performed at the same interval as before unless
otherwise noted.

Failure to do even one item an cause the engine to run poorly and increase exhaust emissions.
2. TIRES
(a) Check the pressure with a gauge. If necessary, adjust.
(b) Check for cuts, damage, uneven or excessive wear.
3. WHEEL NUTS
When checking the tires, check the nuts for looseness or for missing nuts. If necessary, tighten them.
4. WINDSHIELD WIPER BLADES
Check for wear or cracks whenever they do not wipe clean. If necessary, replace.
5. FLUID LEAKS
(a) Check underneath for leaking fuel, oil, water or other fluid.
(b) If you smell gasoline fumes or notice any leak, have the cause found and corrected.
6. DOORS AND ENGINE HOOD
(a) Check that all doors and the tailgate operate smoothly, and that all latches lock securely.
(b) Check that the engine hood secondary latch secures the hood from opening when the primary latch
is released.

MA01F-02
MA-4
- MAINTENANCEUNDER HOOD
41 Author
: Date
:
1997 SUPRA (RM502U)
UNDER HOOD
GENERAL MAINTENANCE
1. GENERAL NOTES

Maintenance items may vary from country to country. Check the owner's manual supplement in which
the maintenance schedule is shown.

Every service item in the periodic maintenance schedule must be performed.

Periodic maintenance service must be performed according to whichever interval in the periodic main-
tenance schedule occurs first, the odometer reading (miles) or the time interval (months).

Maintenance service after the last period should be performed at the same interval as before unless
otherwise noted.

Failure to do even one item an cause the engine to run poorly and increase exhaust emissions.
2. WINDSHIELD WASHER FLUID
Check that there is sufficient fluid in the tank.
3. ENGINE COOLANT LEVEL
Check that the coolant level is between the ºFULLº and ºLOWº lines on the see-through reservoir.
4. RADIATOR AND HOSES
(a) Check that the front of the radiator is clean and not blocked with leaves, dirt or bugs.
(b) Check the hoses for cracks, kinks, rot or loose connections.
5. BATTERY ELECTROLYTE LEVEL
Check that the electrolyte level of all battery cells is between the upper and lower level lines on the case.
6. BRAKE AND CLUTCH FLUID LEVELS
Check that the brake and clutch fluid levels are near the upper level line on the see-through reservoirs.
7. ENGINE DRIVE BELT
Check drive belt for fraying, cracks, wear or oil contamination.
8. ENGINE OIL LEVEL
Check the level on the dipstick with the engine turned off.
9. POWER STEERING FLUID LEVEL

Check the level on the dipstick.

The level should be in the ºHOTº or ºCOLDº range depending on the fluid temperature.
10. AUTOMATIC TRANSMISSION FLUID LEVEL
(a) Park the vehicle on a level surface.
(b) With the engine idling and the parking brake applied, shift the selector into all positions from ºPº to ºLº,
and then shift into ºPº position.
(c) Pull out the dipstick and wipe off the fluid with a clean rag. Re-insert the dipstick and check that the
fluid level is in the HOT range.
(d) Do this check with the fluid at normal driving temperature (70 - 80°C, 158 - 176°F).
HINT:
Wait until the engine cools down (approx. 30 min.) before checking the fluid level after extended driving at
high speeds, in hot weather, in heavy traffic or pulling a trailer.
11. EXHAUST SYSTEM
If any change in the sound of the exhaust or smell of the exhaust fumes is noticed, have the cause located
and corrected.

MA01E-01
MA-2
- MAINTENANCEINSIDE VEHICLE
39 Author
: Date
:
1997 SUPRA (RM502U)
INSIDE VEHICLE
GENERAL MAINTENANCE
These are maintenance and inspection items which are considered to be the owner's responsibility.
They can be done by the owner or they can have them done at a service shop.
These items include those which should be checked on a daily basis, those which, in most cases, do not
require (special) tools and those which are considered to be reasonable for the owner to do.
Items and procedures for general maintenance are as follows.
1. GENERAL NOTES

Maintenance items may vary from country to country. Check the owner's manual supplement in which
the maintenance schedule is shown.

Every service item in the periodic maintenance schedule must be performed.

Periodic maintenance service must be performed according to whichever interval in the periodic main-
tenance schedule occurs first, the odometer reading (miles) or the time interval (months).

Maintenance service after the last period should be performed at the same interval as before unless
otherwise noted.

Failure to do even one item an cause the engine to run poorly and increase exhaust emissions.
2. LIGHTS
(a) Check that the headlights, stop lights, taillights, turn signal lights, and other lights are all working.
(b) Check the headlight aim.
3. WARNING LIGHTS AND BUZZERS
Check that all warning lights and buzzers function properly.
4. HORN
Check that it is working.
5. WINDSHIELD GLASS
Check for scratches, pits or abrasions.
6. WINDSHIELD WIPER AND WASHER
(a) Check operation of the wipers and washer.
(b) Check that the wipers do not streak.
7. WINDSHIELD DEFROSTER
Check that air comes out from the defroster outlet when operating the heater or air conditioner.
8. REAR VIEW MIRROR
Check that it is mounted securely.
9. SUN VISORS
Check that they move freely and are mounted securely.
10. STEERING WHEEL
Check that it has the specified freeplay. Be alert for changes in steering condition, such as hard steering,
excessive freeplay or strange noises.
11. SEATS
(a) Check that the seat adjusters operate smoothly.
(b) Check that all latches lock securely in any position.
(c) Check that the head restraints move up and down smoothly and that the locks hold securely in any
latch position.
(d) For fold-down seat backs, check that the latches lock securely.
12. SEAT BELTS
(a) Check that the seat belt system such as the buckles, retractors and anchors operate properly and
smoothly.
(b) Check that the belt webbing is not cut, frayed, worn or damaged.

SS0CT-01
- SERVICE SPECIFICATIONSAUTOMATIC TRANSMISSION (2JZ-GTE)
SS-45
202 Author
: Date
:
1997 SUPRA (RM502U)
AUTOMATIC TRANSMISSION (2JZ-GTE)
SERVICE DATA
Line pressure (Wheel locked)
Engine idling
D position
R position
AT stall (Throttle valve fully opened)
D position
R position
471 - 530 kPa (4.8 - 5.4 kgf/cm2, 68 - 77 psi)
686 - 785 kPa (7.0 - 8.0 kgf/cm2, 100 - 114 psi)
1,334 - 1,470 kPa (13.6 - 15.0 kgf/cm
2, 193 - 213 psi)
1,697 - 2,030 kPa (17.3 - 20.7 kgf/cm2, 246 - 294 psi)
Engine stall revolution D and R positions2,600 ± 150 rpm
Time lag N " D position
N " R positionLess than 1.2 seconds
Less than 1.5 seconds
Engine idle speed
(A/C OFF) N position
650 ± 50 rpm
Drive plate runoutMax.
Torque converter clutch runout Max.
Torque converter clutch installation distance0.20 mm (0.0079 in.)
0.30 mm (0.0118 in.)
More than 0.1 mm (0.004 in.)
Shift schedule (NORM mode)
D position
(Throttle valve fully opened) 1 " 2
2 " 3
3 " O/D
O/D " 3
3 "2
2 " 1
(Throttle valve fully closed) 3 " O/D
O/D " 3
2 position
(Throttle valve fully opened) 2 " 1
*3 "2
2 " 1
L position
(Throttle valve fully opened) *2 "1
62 - 72 km/h (39 - 45 mph)
120 - 129 km/h (75 - 80 mph)
187 - 201 km/h (116 - 125 mph)
181 - 195 km/h (112 - 121 mph)
109 - 117 km/h (68 - 73 mph)
41 - 47 km/h (25 - 29 mph)
29 - 34 km/h (18 - 25 mph)
23 - 28 km/h (14 - 17 mph)
62 - 72 km/h (39 - 45 mph)
135 - 147 km/h (84 - 91 mph)
41 - 47 km/h (25 - 29 mph)
60 - 66 km/h (37 - 41 mph)
Shift schedule (MANU mode)
D position
(Throttle valve fully opened) 2 " 3
3 " O/D
O/D " 3
3 "2
(Throttle valve fully closed) 3 " O/D
O/D " 3
2 position
(Throttle valve fully opened) *3 "2
L position
(Throttle valve fully opened) *2 "1
122 - 131 km/h (76 - 81 mph)
194 - 207 km/h (121 - 129 mph)
187 - 201 km/h (116 - 125 mph)
109 - 117 km/h (68 - 73 mph)
181 - 195 km/h (112 - 121 mph)
23 - 28 km/h (14 - 17 mph)
135 - 147 km/h (84 - 91 mph)
60 - 66 km/h (37 - 41 mph)
*: Shift points are the same when the throttle valve is closed as when the throttle valve is opened.