P12054
P11554
P11796
Z09426
Normal Roof
Sport Roof EM-62
- ENGINE MECHANICAL (2JZ-GTE)ENGINE UNIT
1167 Author: Date:
1997 SUPRA (RM502U)
23. PDISCONNECT HEATED OXYGEN SENSOR FROM
FRONT EXHAUST PIPE
Remove the 2 nuts, and disconnect oxygen sensor and gasket.
24. REMOVE EXHAUST PIPE ASSEMBLY
(a) Remove the 2 bolts and nuts holding the front exhaust
pipe to the No.2 front exhaust pipe.
(b) Remove the 2 bolts and pipe support bracket.
(c) Remove the gasket, and disconnect the front exhaust
pipe.
(d) Disconnect the hook of the tailpipe from the 2 rings.
(e) Disconnect the 2 rings on the exhaust pipe from the ex-
haust pipe brackets, and remove the exhaust pipe as-
sembly.
25. REMOVE NO.2 FRONT EXHAUST PIPE
Remove the 3 nuts, front exhaust pipe and gasket.
26. REMOVE EXHAUST PIPE HEAT INSULATOR
Remove the 4 nuts and heat insulator.
27. REMOVE REAR CENTER FLOOR CROSSMEMBER
BRACE
Remove the 4 bolts (Normal roof) or 6 bolts (Sport roof) and
crossmember brace.
28. REMOVE PROPELLER SHAFT
(See page PR-4)
EM0AS-02
S00574
Z18960
Support
Ring
TailpipeTailpipe
Baffle
Gasket RingCenter Exhaust PipeHeat Insulator
Gasket
Ring
Heat InsulatorHeat Insulator
Gasket
Gasket Gasket
GasketHeat Insulator
Heated Oxygen Sensor
Pipe Support Bracket No.2 Front Exhaust Pipe
(with Front TWC)
Non-reusable partNormal RoofSport Roof
Front Exhaust Pipe
(with Rear TWC)
(Bank 1 Sensor 2)
- ENGINE MECHANICAL (2JZ-GTE)EXHAUST SYSTEM
EM-95
1200 Author: Date:
1997 SUPRA (RM502U)
EXHAUST SYSTEM
COMPONENTS
