SS-54
- SERVICE SPECIFICATIONSSUSPENSION AND AXLE
211 Author: Date:
1997 SUPRA (RM502U)
Drive pinion oil seal drive in depth0 ± 0.5 mm (0 ± 0.020 in.)
Drive pinion shaft runout Maximum0.08 mm (0.0031 in.)
Ring gear runout Maximum0.05 mm (0.0020 in.)
Ring gear backlash Maximum0.08 - 0.13 mm (0.0031 - 0.0051 in.)
Rear differential
Except
Drive pinion preload (at starting) New bearing
Reused bearing1.5 - 1.8 N´m (15 - 18 kgf´cm, 13.0 - 16.0 in.´lbf)
0.5 - 0.8 N´m (5 - 8 kgf´cm, 4.3 - 6.9 in.´lbf)
Except
2JZ-GTE (M/T)Total preload (at starting)Drive pinion preload plus
0.5 - 0.8 N´m (5 - 8 kgf´cm, 4.3 - 6.9 in.´lbf)
Distance between 2 side gear shafts281.8 ± 0.95 mm (11.094 ± 0.037 in.)
Pinion gear backlash (Conventional type)0.05 - 0.20 mm (0.0020 - 0.0079 in.)
Pinion gear backlash adjusting thrust washer
(Conventional type)1.6 mm (0.063 in.)
1.7 mm (0.067 in.)
1.8 mm (0.071 in.)
