1997 SSANGYONG KORANDO reservoir

WIPER, WASHER SYSTEMS 9D-3
SSANGYONG MY2002
COMPONENTS LOCATOR
LIGHTING SYSTEM
1 Windshield Wiper Arm
2 Windshield Wiper Motor
3 Windshield Wiper Blade
4 Windshield Washer Reservoir
5 Windshield Wiper Linkage
6 Windshield Washer Pump7 Windshield Washer Nozzles
8 Windshield Washer Hoses
9 Rear Wiper Arm
10 Rear Wiper Motor
11 Rear Washer Reservoir
KAA9D010

WIPER, WASHER SYSTEMS 9D-5
SSANGYONG MY2002
KAA9D050
KAA9D060
5. Remove nuts and the wiper motor.
Installation Notice
Dissimilar metals in direct contact with each
other may corrode rapidly. Make sure to use
the correct fasteners to prevent premature
corrosion.
6. Installation should follow the removal procedure
in the reverse order.
WINDSHIELD WASHER
RESERVOIR
Removal and Installation Procedure
1. Open the hood.
2. Disconnect the negative battery cable.
3. Remove the coolant reservoir. Refer to Section 1D,
ENGING COOLING.
4. Disconnect the washer hose from the washer
pump.
WINDSHIELD WIPER BLADE
Removal and Installation Procedure
1. Rotate the wiper blade on the arm.
2. While pressing the retainer clip, slide the wiper
blade down the wiper arm and remove the blade.
3. Installation should follow the removal procedure
in the reverse order.
Tightening Torque8 - 12 Nm
(71 - 106 lb-ft)
KAA9D070
5. Disconnect the reservoir pump electrical
connector.
6. Remove the bolt and the reservoir
Installation Notice
Dissimilar metals in direct contact with each
other may corrode rapidly. Make sure to use
the correct fasteners to prevent premature
corrosion.
7. Installation should follow the removal procedure
in the reverse order.
Tightening Torque5 - 9 Nm
(44 - 80 lb-in)

SSANGYONG MY2002
9D-6 WIPER, WASHER SYSTEMS
KAA9D080
KAA9D090
KAA9D100
WINDSHIELD WASHER PUMP
Removal and Installation Procedure
1. Remove the windshield washer reservoir. Refer to
in this section “windshield washer reservoir”.
2. Remove the windshield washer pump.
3. Installation should follow the removal procedure
in the reverse order.
WINDSHIELD WASHER HOSES
Removal and Installation Procedure
1. Open the hood.
2. Disconnect the windshield washer hose from the
washer nozzles on the hood.
3. Disconnect the washer hose from the washer
reservoir.
4. Remove the washer hose.
5. Installation should follow the removal procedure
in the reverse order.
KAA9D110
REAR WIPER ARM
Removal and Installation Procedure
1. Remove the spare tire with wheel nuts.
2. Pry off the rear wiper arm cap.
3. Remove the rear wiper arm with the nut.
Installation Notice
Dissimilar metals in direct contact with each other
may corrode rapidly. Make sure to use the correct
fasteners to prevent premature corrosion.
4. Installation should follow the removal procedure
in the reverse order.
WINDSHIELD WASHER NOZZLES
Removal and Installation Procedure
1. Open the hood.
2. Disconnect the washer hose from the nozzle.
3. Remove the nozzle from the hood.
4. Installation should follow the removal procedure
in the reverse order.
Tightening Torque8 - 12 Nm
(71 - 106 lb-in)

WIPER, WASHER SYSTEMS 9D-7
SSANGYONG MY2002
KAA9D120
KAA9D130
REAR WIPER MOTOR
Removal and Installation Procedure
1. Remove the tailgate trim panel. Refer to Section
9G “INTERIOR TRIM”.
2. Remove the tailgate seal trim.
3. Remove the wiper motor.
Installation Notice
Dissimilar metals in direct contact with each
other may corrode rapidly. Make sure to use
the correct fasteners to prevent premature
corrosion.
4. Installation should follow the removal procedure
in the reverse order.
Tightening Torque8 - 12 Nm
(71 - 106 lb-in)
KAA9D140
REAR WASHER RESERVOIR
Removal and Installation Procedure
1. Remove the tailgate trim panel. Refer to Section
9G “INTERIOR TRIM”.
2. Remove the tailgate seal trim.
3. Disconnect the washer hose and electrical
connector.
4. Remove the rear washer reservoir.
Installation Notice
Dissimilar metals in direct contact with each
other may corrode rapidly. Make sure to use
the correct fasteners to prevent premature
corrosion.
5. Installation should follow the removal procedure
in the reverse order.
Tightening Torque8 - 12 Nm
(71 - 106 lb-in)

SSANGYONG MY2002
9D-8 WIPER, WASHER SYSTEMS
Rear Wiper Arm Nut
Windshield Washer Reservoir Mounting Bolts
Windshield Washer Reservoir Mounting Bolts (Front)
Wiper Motor Mounting Nuts (Front)
Wiper Motor Mounting Nut (Rear)Application
N•m14 - 18
8 -12
8 -12
8 -12
8 -1210 - 13
10.5 - 15.8
10.5 - 15.8
10.5 - 15.8
10.5 - 15.8-
126 - 190
126 - 190
126 - 190
126 - 190 Lb-FtLb-In
SPECIFICATIONS
FASTENER TIGHTENING SPECIFICATIONS