1997 RENAULT KANGOO engine

Contents
GENERAL
Dimensions
Engine and equipment
Identification
Means of lifting
Towing
Using symbols
Key to symbols
Description of Parts (exploded)
Opening clearances
Collision fault finding
Sub- frame dimensions
Repair bench
Special tooling
Part Number of special tooling40-1
40-2
40-4
40-6
40-8
40-9
40-11
40-12
40-15
40-22
40-25
40-27
40-38
40-38
LOWER STRUCTURE
41- 1
41- 5
41-10
41-13
41-17
41-21
41-26
41-29
41-33
41-36
41-39
41-41
41-44
41-51
41-53
41-55
41-58
41-60
41-62
41-63
41-67
41-68
41-71UPPER FRONT STRUCTUREPage Page40
41
42
Sheet metal work
UPPER SIDE STRUCTURE43
AFront end lower cross member
BFront side member, front section
CFront side member closure panel
DFront half unit
EFront side cross member
FFront side member, rear section
GFront mounting of sub frame
HSill panel closure panel
ICross member under front seat
JSide floor
KTunnel
LRear floor, front section
MRear floor, rear section (part
section)
NFront cross member of rear floor,
front section
ORear floor stiffener
PRear end cross member
QRear absorber reinforcement
RRear side member extension
SRear side member, part section
TComplete rear side member
URear floor centre cross member
VSeat anchoring reinforcement
WRear floor unit42-1
42-2
42-5
42-8
42-12
42-17
42-24
42-28
42-32
42-34 AFront wing
BHeadlight carrier panel
CCowl side panel (pillar lining)
part section
DUpper reinforcement of cowl side
panel
EWheel arch, front section
FWheel arch
GPlenum chamber
HWindscreen aperture lower cross
member
ISteering column mounting
JBulkhead
43-1
43-6
43-9
43-14
43-19
43-23
43-25 AFront pillar
BWindscreen pillar
C Front pillar lining/Cowl side panel
DCentre pillar / sill panel
ECentre pillar lower reinforcement /
door pillar
FSill panel reinforcement
GLeft hand side sill panel
UPPER REAR STRUCTURE
44
44-1
44-9
44-17
44-26
44-30
44-33
44-38
44-41 ARear wing panel
BSide panel
CSide panel lining
DRoof stretcher lining
ERear inner wheel arch
FLights mounting side panel rain
channel
GRear wing panel extension
HRear end panel

GENERAL
Engine and equipment
40
Vehicle type Engine
TypeCapacity
(cm
3)Clutch type Gearbox type
manual and automatic
FC0A
KC0AD7F 1149 180 CP 3300 JB1
FC0C
KC0CE7J 1390 180 CP 3300 JB3
FC0D
KC0D
FC0E
KC0EF8Q 1870 200 CPOV 3250 JB1
40-2

GENERAL
Engine and equipment
40
SPECIFIC BODYWORK FEATURES
Driver’s airbag
Passenger’s and driver’s airbag
Height adjustable front head restraint
Height adjustable and tiltable front head restraint
Rear parcel shelf
Luggage compartment net
Electric one touch windows
Heated electric rear view mirrors
Heated screen + timed windscreen wiper
Heated front seats
Front seat driver emergency exit
Rear bench seat 1/1
Rear bench seat 1/3 - 2/3
Cabin rack without stop
Headlining
Boot carpet
Parcel shelf luggage cover
Two front fog lights in bumper
(excluding F8 AC PAS)Pay load 600 kg
Pay load 625 to 710 kg depending on
engine/equipment
Pay load 800 kg
Glazed, sliding side door and rear opening doors
or glazed tailgate
Sliding side door (reflective glass)
Sliding side door (panel)
Rear door, panel
Rear door, glazed
Opening doors, panels
Opening doors, glazed
Tailgate
Opaque roof flap (excluding tailgate)
Glazed roof flap (excluding tailgate)
Fixed side window (meaning glazed side door)
Sliding side window
Fixed rear quarter panel (meaning the glazed
sliding side door )
Heat insulating windscreen (with air conditioning)
2 point rear centre seat belt
3 point rear centre seat belt
40-3

GENERAL
Identification
40
Numbers given on the manufacturer’s plate and on the engine plate should be quoted in all letters or
orders.
1 The type mines of the vehicle and the chassis number
2 The total all up weight(P.T.M.A.)
3 The maximum permitted total train weight (P.T.R. - vehicle loaded with trailer)
4 The maximum permitted weight on the front axle (P.T.M.A. front axle)
5 The maximum permitted weight on the rear axle (P.T.M.A. rear axle)
6 The technical features of the vehicle
7 The paint reference
8 The equipment level
9 The vehicle type
10 The trim code
11 The additional equipment definition
12 The fabrication number
13 The interior matching trim code
e0-00/00-0000-000-000-00
VF000000000000000
0000 kg
0000 kg
1
- 0000 kg
2
- 0000 kg
000000000000000RENAULT S.A.
1
2
3
4
5
8 7
6
9
10
13
12 11
40-5

GENERAL
Means of lifting
40
SAFETY SYMBOL
There are several examples :
1 - WHEN REMOVING PARTS
Generally speaking, never use a 2 post lift if a
four post lift would be more suitable.
If this is not possible, position the lifting pads
below the body flange at the jacking points for
the jack supplied with the vehicle.
98703S
FRONT
98704S
REAR
These absolutely MUST be placed to the right of
the jacking points. They must be clipped into the
sill panel flange openings.
2 -
SPECIAL CASE OF THE REMOVAL - REFITTING
OF THE ENGINE AND TRANSMISSION
ASSEMBLY
In this specific case, the body of the vehicle must
be attached to the arms of the two post lift with
special pads.
FOG Company
Part number FOG 449 8111 - 449 8411
or
CHEMICO Company
Part number 39 2550 0001
or
SCHENCH Company
Part number 776 684
40-7

GENERAL
Sub-frame dimensions
40
DESCRIPTION X Y ZDIAMETER SLOPE %
A Front sub-frame rear mounting 205 402.5 71 18.5 0
B Rear axle assembly front mounting 1 999.3 657 71.3 20×20 X : 8°20
C Front left sub-frame front mounting - 418 447 13010×10
(squared)0
Front right sub-frame front mounting - 418 465 13010×10
(squared)0
E Rear shock absorber upper mounting 2 333.13 545.75 184 12.5 0
F Front shock absorber upper mounting 18.5 545.50 657 48X : 3°02
Y : 1°
G1 Rear section of front left side member 600 - 375 020×20
(squared)0
Rear section of front right side member 600 351.6 020×20
(squared)0
J Rear point of rear side member 2 918 497.5 151 12.2×16.2 X : 3°
K Front end cross member 575 315 280 14.25X : 4°30
Z : 5°
L Rear end cross member (end panel) 3 121 - 497.5 151 M8 0
P Front engine mounting - 247 483.5 514 M10 0
Rear engine mounting - 113 483.5 514 M10 0
40-25

GENERAL
Repair Bench
40
12667R
The bracket touches below the side member and
is centred in the pilot hole (slot).
It may be used for a slight rear impact without re-
moving the rear axle, but requires the removal of
the exhaust mounting.
P - FRONT AND REAR ENGINE MOUNTINGIII - REFERENCE POINTS FOR POSITIONING REPLACED PARTS (cont)
12841S
The bracket is positioned from above the engine
mounting, and is centred in the mounting holes of
the engine mounting.
It is used with the mechanical units removed for
replacing a front half unit.
J - REAR SIDE MEMBER REAR END
40-33

GENERAL
Repair Bench
40
12668R1
The bracket helps with the fitting of the cross
member and rests vertically against the front end
cross member, then it is centred by a centring bolt
at (K).
1 - Front mechanical units removed
It is used for replacing the front end cross mem-
ber, with or without mechanical units.
NOTE : The operation for replacing the front end
cross member can be carried out without the re-
moval of the engine and transmission assembly,
but requires the removal of the radiator.
2 - Front mechanical units in place
The bracket helps with fault finding on the front
cross member.
III - REFERENCE POINTS FOR POSITIONING REPLACED PARTS (cont)
L - REAR END CROSS MEMBER (REAR END)
12667R1
The bracket helps with the fitting of the cross
member and rests vertically against the rear end
cross member, then centres itself in the mounting
hole of the absorber mounting.
It is used for replacing the whole rear end, with or
without mechanical units.
K - FRONT END CROSS MEMBER
40-34