LOWER STRUCTURE
Complete rear side member
41T
PRB4140
INTRODUCTION
The replacement of this part is a complementary
operation to the replacement of the side panel
with lining and the inner wheel arch for a rear
side impact.
It requires the partial replacement of the rear
floor, rear section and the front cross member of
the rear floor .
In the operation described below, there are only
descriptions of the joints specific to the part
concerned.
Information concerning the other parts will be
dealt with in the respective sections.
The repair bench must be used.
COMPOSITION OF THE PART FROM THE PARTS
DEPARTMENT
Part assembled with:
- side member rear reinforcement,
- towing ring (left hand side),
- rear side member extension ,
- upper shock absorber gusset,
- rear axle assembly mounting unit,
- upper gusset of rear axle assembly mounting,
- side member reinforcement,
- sill panel closure panel, rear section.
JOINTS WITH:
Sill panel closure panel
Centre cross member
Rear floor stiffener
PARTS CONCERNED (thickness in mm):
1Rear side member 1.5
2Rear floor 1
3Centre cross member 1.5
4Sill panel closure panel 1.2
5Sill panel closure panel,
rear section 1.5
6Rear floor stiffener 1
7Rear shock absorber lower gusset 1.5
41-63
