1997 RENAULT KANGOO headlight

UPPER FRONT STRUCTURE
Cowl side panel upper reinforcement
42D
PRB4211
INTRODUCTION
The replacement of this part is complementary to
the headlight carrier panel for a frontal impact.
In the operation described below there are only
descriptions of joints specific to the part concer-
ned.
COMPOSITION OF THE PART FROM THE PARTS
DEPARTMENT
Parts only :
1 - Cowl side panel upper reinforcement, front
section.
2 - Cowl side panel upper reinforcement, rear
section.
PARTS CONCERNED (thickness in mm):
1Cowl side panel (pillar lining) 1
2Cowl side panel upper reinforcement,
front section 1
3Cowl side panel upper reinforcement,
rear section 1
4Engine support plate 2
5Shock absorber cup 2
6Shock absorber cup height adjuster 1
7Windscreen wiper mounting 1
8Front pillar 1.5
JOINTS WITH :
Cowl side panel (pillar lining)
Cowl side panel upper reinforcement, front
section
Cowl side panel upper reinforcement, rear
section
Front pillar
12892R
CAA11538R4
A
2 / 3
1
42-8

NON-SIDE OPENING ELEMENTS
Bonnet
REFITTING
Refit in the opposite way to removal and refer to
section 40 (opening clearances) to correctly make
adjustments.
ADJUSTMENT
The height adjustment is carried out using strut
mounting bolts (B) on the headlight carrier panel.
The front and rear adjustments are carried out
using mounting nuts (A) on the bonnet .
REMOVAL
48A
PRB4808
13238R
Remove the bonnet nuts (A) (operation must be
carried out by two people).
48-1

NON-SIDE OPENING ELEMENTS
Bonnet hinges
48B
PRB4809
REFITTING
Refer to the preceding section, to make adjus-
tments to the bonnet.
REMOVAL
13238R
Remove:
- the bonnet nuts at (A) (operation must be car-
ried out by two people),
- the bonnet,
- the strut mounting bolts (B) on the headlight
carrier panel.
48-2