1997 RENAULT CLIO alternator

ENGINE AND PERIPHERALS
S
pecifications10
CONSUMABLES
PARTS TO BE RENEWED WHEN THEY HAVE BEEN
REMOVED
All seals and gaskets.
Flywheel bolts.
Valve guides.
Cylinder head bolts.
Crankshaft bearing bolts.
PRECAUTIONS
WASHING OF ENGINE
Protect the timing and alternator belts to avoid
splashing of water and washing products on to
them.
Do not allow water to penetrate the air inle
t
pipes.
FITTING OF THREAD INSERTS
The threaded holes in all the engine components
may be repaired using thread inserts.
Type QuantityComponent concernedParts Dept. Nos.
( SODICAM )
Loctite FRENETANCH (Locking and
sealing resin)
Loctite FRENBLOC (Locking and
sealing resin)
Loctite AUTOFORM
RHODORSEAL 5661
Loctite 518
Décapjoin
t
1 to 2 drops
Coa
t
Coat
Coat
Bead
Coa
t
Mounting bolts: flywheel, torque
converter starter plate
Crankshaft bearing (if the flywheel
mounting bolts have no locking
plate)
Flywheel bearing face on cranks-
haf
t
Sump, bearing cap, crankshaft
bearing
Water pump. crankshaft cove
r
Cleaning of aluminium cylinder
head gasket face
77 01 394 070
77 01 394 071
77 01 400 309
77 01 404 452
77 01 421 162
77 01 405 952
10-19
Page 1 of 1 E_Series_21
04.08.2003 http://jester.com.ua/renault/motors/e/E_Series/css/E_Series_21.htm

ENGINE AND PERIPHERALS
En
gine repair10
ENGINE REMOVAL
Fix the engine onto support
Mot. 792-03 with the
Mot. 1132 rods.
Drain:
- the engine oil,
- the cylinder block coolant (if the engine has a
drain plug).
10020R
92073R1
Refit the drain plugs.Remove:
- the engine wiring loom,
- the alternator and its belt,
- the crankshaft pulley; in order to do this, immo-
bilise it with tool
Mot. 582-01.
- the timing cover.
10-26
Page 1 of 1 E_Series_28
04.08.2003 http://jester.com.ua/renault/motors/e/E_Series/css/E_Series_28.htm

ENGINE AND PERIPHERALS
En
gine repair10
12310R
Tension(US = SEEM
Units)
Alternator
belt
Vee
F1
Grooved
3 teeth
F2Power assisted
steerin
g
belt
Grooved 3 teeth
F3
(E7J 764)F3 F4Air
conditionin
g
belt
Vee
F5Grooved 4 teeth
F6 F7Air conditionin
g and
power assisted
steerin
g
belt
Grooved 4
teeth
F8 F9Grooved 5
teeth
F8
Fitting
83 ± 7 84 ± 684 ± 684 ±5 84 ±490
102 ±6 103 ±4 106 110 ± 7110
Minimum
operating70 52 52 46 47 72 55 77 59 75 59
A Crankshaf
t
B Alternator
C Air conditioning compressor
D Power assisted steering pump
E Pulley
T Tension wheel
→ Tension checking poin
t
Alternator Power assisted steering
12311R
10-51
Page 1 of 1 E_Series_53
04.08.2003 http://jester.com.ua/renault/motors/e/E_Series/css/E_Series_53.htm