CYLINDER LINERS
The cylinder liners are the wet type.
They have an O-ring at the base (J).
Height of liners
(mm)H2 = 130
Inside diameter
(mm)75.8
Centring diameter
(mm)D = 80.6
Protrusion of liners
without seal
(mm)X = 0.02 to 0.09
Height of liners
(mm)H1 = 91.5
Cylinder bloc
k
depth (mm)K1 = 91.5
ENGINE AND PERIPHERALS
S
pecifications10
Rings (thickness in mm)
Upper piston ring
1.5
Taper compression piston ring
1.75
Scraper ring
3
CONNECTING RODS (mm)
Side clearance of the
big end (mm)0.310 to 0.572
WARNING: Do not use a scriber tool for the mar-
kin
g, in order to avoid starting any cracks in the
connectin
g rods.
Use an indelible
pencil instead.
+0.03
0
+0.035
+0.005
- 0.015
- 0.055
75615R4
Measurement of piston diameter
The diameter must be measured at dimension
A
= 46 mm.
86928-4R
10-16
Page 1 of 1 E_Series_18
04.08.2003 http://jester.com.ua/renault/motors/e/E_Series/css/E_Series_18.htm
