1997 Mercury Villager remove seats

Controls and Features
61
[CF03900(ALL)01/96]
n
Do not place objects under the front seats unless your
vehicle is equipped with an underseat storage compartment.
Improperly stored objects will interfere with the flow of air
to the back seats.
*
[CF04000(ALL)01/96]
n
Remove any snow, ice, or leaves from the area below the
windshield on the outside of your vehicle. They could block
the air intake.
[CF04100(ALL)04/96]
Heating and Air Conditioning System (If equipped)
[CF04200(ALL)04/96]
Turning on the heat
[CF04300(ALL)01/96]
You can heat the inside of your vehicle and defrost the
windshield using the function selector buttons located in the
control assembly in the instrument panel.
[CF04400(ALL)03/96]
The six function selector buttons are: OFF, Mix (P), Defrost
(V), Panel (Q), Panel/Floor (S), and Floor (R). If your
vehicle is equipped with a rear seat climate control system, the
instrument panel will also include a rear seat climate control
lever. To turn on the rear passenger compartment control
system, select REAR, 1, 2, 3, or 4. With the lever set to REAR,
rear seat passengers will have control of rear fan speed on the
rear seat climate control panel. Positions 1, 2, 3, or 4 will control
rear fan speed from the front control panel. The temperature of
the air from the rear system is controlled by the rear passenger
compartment climate control system.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996

Seating and Safety Restraints
165
[SS20220(ALL)01/96]
Tethering to floor anchor
[SS20300(ALL)05/96]
Ford recommends placing tethered safety seats in a rear seating
position with the tether strap attached to the tether anchor bolt
as shown in the following illustration.
[SS20400(ALL)01/96]
17-1/2 pica
art:0040042-A
Tether anchor point locations
[SS20500(ALL)01/96]
To gain access to the anchoring bolt, cut through the plastic
along the U-shaped tether location outlines on the carpet of the
luggage area. Remove the bolt that is currently in the anchor
location. The tether anchor hardware has been preassembled. To
attach it, orient the tab in the bracket toward the front of the
vehicle and securely tighten the bolt. Follow the child safety
seat directions for attaching the tether strap to the anchor
bracket.
File:06vxssn.ex
Update:Thu Jun 6 10:54:22 1996

181
Adjustable Rear Seating
[RR00900(ALL)04/94]
The removable and adjustable seats are a convenient feature of
your vehicle. Reading this chapter will help you learn about the
various ways the seats in your vehicle can be arranged to suit
your different needs.
[RR01000(ALL)05/96]
Your vehicle is a five or seven-passenger vehicle. As a
seven-passenger vehicle, it will have either a two-passenger
bench seat or two second-row bucket seats and the sliding
three-passenger bench seat in the third row. Read the section
that describes the type of second-row seat in your vehicle. To
make your vehicle a five-passenger vehicle, remove the
second-row seats.
[RR01100(ALL)09/95]
NOTE: When adjusting or moving any of the seats in your
vehicle, do not use any of the buckles, tongues, or
safety belt webbing to carry or move the seats. Lifting
the seats by any of the safety restraint equipment
could decrease their effectiveness.
[RR01200(ALL)09/95]
NOTE: Your vehicle has five different kinds of floor mats:
front seat mats, a cargo area mat, a sliding door area
mat, and second and third row passenger area mats.
Whenever you remove the mats to remove or adjust
any of the seats always remember that the mats must
be reinstalled before passengers ride in your vehicle.
The floor mats are specifically designed to keep
objects out of the seat tracks.
[RR01300(ALL)01/93]
RWARNING
It is important to replace the floor mats whenever they
are removed for any reason. The floor mats are intended
to help prevent the possibility that high-heeled shoes
might become stuck in the seat tracks. Failure to replace
the floor mats might result in personal injury.
File:07vxrrn.ex
Update:Thu May 30 09:53:21 1996

182
*
[RR01400(ALL)12/95]
Floor Mats
[RR01500(ALL)02/94]
17-1/2 pica
art:0040142-B
The removable floor mats
[RR01600(ALL)01/93]
Removable Floor Mats
[RR01700(ALL)06/94]
Whenever you remove the mats to remove or adjust any of the
seats, always remember that the mats must be reinstalled before
passengers ride in your vehicle. The floor mats are specifically
designed to keep objects out of the seat tracks.
[RR01800(ALL)01/93]
Be sure to keep the seat tracks clear of debris by cleaning them
periodically.
[RR01900(ALL)04/95]
Vacuum any particles from the inside of the tracks where the
roller units are enclosed using a small crevice tool attached to a
high-powered vacuum. This will ensure that the sliding seat will
continue to slide properly during the life of your vehicle.
File:07vxrrn.ex
Update:Thu May 30 09:53:21 1996

186
[RR02950(ALL)06/95]
NOTE: If your vehicle is equipped with the optional
two-passenger bench seat with built-in child seats, the
head restraints on the two-passenger bench seat are
not adjustable.
[RR03000(ALL)01/96]
17-1/2 pica
art:0040136-A
The adjustable head restraint
[RR03100(ALL)07/93]
It is not necessary to remove the head restraints from the seats
when removing seats from the vehicle. However, you can
remove the head restraints by pressing the adjustment button at
the base of the head restraint and pulling the head restraint
upward. Remember to replace them when the seat is
re-installed.
File:07vxrrn.ex
Update:Thu May 30 09:53:21 1996

192
[RR06500(ALL)06/93]
The quick-release bucket seat also has two levers on the back of
the seat Ð one to fold down the seatback and one to slide the
seat forward. These levers allow third-row passengers to enter
and exit more easily.
[RR06600(ALL)06/95]
13-1/2 pica
art:0040144-D
Quick-release bucket seat levers
[RR06700(ALL)01/93]
Removable Bucket Seats
[RR06800(ALL)04/94]
If your vehicle has second row bucket seats, you can remove
them if you need extra cargo space. With the second-row seats
removed, the third-row bench seat can be moved up to the
second row position for additional rear cargo area room. When
the third-row seat is moved to this position, passengers will use
the second-row safety belts.
[RR06900(ALL)02/94]
To help prevent personal injury, at least two people are needed
to remove the seats.
File:07vxrrn.ex
Update:Thu May 30 09:53:21 1996

Adjustable Rear Seating
193
[RR07000(ALL)01/93]
Before you remove the seats, remove the floor mats. Then:
[RR07100(ALL)01/93]1.
Pull the seatback release lever up and tilt the back of the
seat forward as far as possible.
[RR07200(ALL)09/93]
17-1/2 pica
art:0040145-B
Folding down the seatback
File:07vxrrn.ex
Update:Thu May 30 09:53:21 1996

Adjustable Rear Seating
195
[RR07500(ALL)02/94]
17-1/2 pica
art:0040146-B
The removable inside bucket seat
[RR07600(ALL)02/94]3.
Place your hand under the seat cushion and tip the front of
the seat upward slightly. Slide the seat rearward to release
the seat from its anchor position.
[RR07700(ALL)01/93]4.
Two people should lift the seat and remove it from the
vehicle.
[RR07800(ALL)01/93]5.
Replace any floor mats that were removed.
[RR07900(ALL)09/95]
NOTE: The bucket seats are not interchangeable due to the
locations of the floor latch levers. Each seat must be
reinstalled in its original position. In addition, the
seat behind the driver seat only has one arm rest.
File:07vxrrn.ex
Update:Thu May 30 09:53:21 1996