1997 Mercury Villager door lock

Controls and Features
105
*
[CF32000(ALL)01/96]
RWARNING
Make sure that the liftgate door and/or window are
closed to prevent exhaust fumes from being drawn into
the vehicle. This will also prevent passengers and cargo
from falling out. If you must drive with the liftgate door
or window open, keep the vents open so outside air
comes into the vehicle.
[CF32100(ALL)01/96]
Closing the Liftgate
[CF32200(ALL)01/96]
To close the liftgate, reach up and pull the handle on the inner
trim panel downward.
[CF32300(ALL)01/96]
When you have pulled down the liftgate enough so that you
can reach the license plate light shield, push the shield down
and forward to close the liftgate. At this point, the liftgate is not
locked.
[CF32400(ALL)01/96]
The liftgate has an intermediate and a fully closed position.
Make sure the liftgate is fully closed before you drive your
vehicle.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996

106
[CF32500(ALL)01/96]
24 pica art:0040099-D
Locking the liftgate using the lock lever
[CF32600(ALL)01/96]
You can lock the liftgate by pushing in the lock lever before
you begin to close the liftgate. You can also lock the liftgate by
closing the liftgate, inserting your key and turning it clockwise
until you hear the lock lever engage. If you turn it too far, the
optional liftgate window will open. The liftgate can also be
locked with the optional power door locks.
[CF32700(ALL)01/96]
The liftgate area is intended only for cargo, not passengers. It
cannot be opened from inside the vehicle.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996

Controls and Features
107
[CF32800(ALL)01/96]
After the lock lever is depressed, the liftgate must be unlocked
with the power door lock button or the key.
[CF32900(ALL)01/96]
NOTE: The lock lever will be on the right side of the lock
cylinder if your vehicle is equipped with the standard
liftgate glass. The lock lever will be on the left side
of the lock cylinder if your vehicle is equipped with
the optional flip-up liftgate window.
%*
[CF33000(ALL)04/96]
Windows
%*
[CF33100(ALL)01/96]
Power Windows (If equipped)
[CF33200(ALL)01/96]
Each of the front doors has a power control that opens and
closes the window on that door. The driver's door has master
controls that operate both front door windows. You must place
the ignition in the ON position to use your power window
controls. The driver's power window controls include a lockout
button which prevents the operation of the passenger side
window from either the passenger or driver side controls.
[CF33300(ALL)01/96]
To open the window, press down on the switch; to close the
window, lift up on the switch.
*
[CF33400(ALL)01/96]
RWARNING
Do not let children play with the power windows.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996

110
[CF34500(ALL)01/96]
10-1/2 pica
art:0040123-B
Power quarter window switch
%*
[CF34600(ALL)03/96]
Mirrors
*
[CF34700(ALL)01/96]
RWARNING
Make sure you can see clearly through the rearview
mirror at all times. Do not block your vision. If you
cannot see through the mirror, it could result in a
collision, injuring yourself and others.
%*
[CF34800(ALL)01/96]
Side View Mirrors
*
[CF34900(ALL)01/96]
Close your door and adjust the driver's seat to the most
comfortable position before you adjust the side view mirrors.
[CF35000(ALL)05/96]
If you have manually adjusting side view mirrors, you can
adjust them in any direction by moving the mirror. The mirror
heads can be folded rearward to prevent damage when using an
automatic car wash.
*
[CF35100(ALL)01/96]
NOTE: Be careful. The convex side view mirror on the right
makes objects appear smaller and farther away than
they actually are. Use the inside rearview mirror (or
look behind you) to determine the actual size and
distance of objects that appear in the convex mirror.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996

114
%*
[CF70000(ALL)05/96]
Keyless Entry System (If equipped)
[CF70100(ALL)03/96]
If you have chosen the keyless entry system option for your
vehicle, you can lock or unlock the doors and liftgate without
using a key. You can also use it to arm or disarm the anti-theft
system (if equipped). For more information on the anti-theft
system, refer to the Index.
*
[CF73200(ALL)01/96]
Remote Keyless Entry System (If equipped)
[CF73300(ALL)01/96]
Your vehicle may be equipped with a remote keyless entry
system. This option will allow you to open your vehicle using a
remote transmitter from distances of up to 49 feet (15 meters)
away. The remote feature will operate only when the ignition is
in the OFF position.
[CF73400(ALL)01/96]
The transmitter can unlock the driver's door, unlock all doors,
lock all doors, and activate the vehicle's anti-theft system (if
equipped).
[CF73500(ALL)01/96]
13-1/2 pica
art:0040304-A
Remote keyless entry transmitter
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996

Controls and Features
115
[CF73600(ALL)05/96]
By pressing the UNLOCK button on the transmitter once, you
can unlock the driver's side door. Pressing the UNLOCK button
a second time within six (6) seconds of unlocking the driver's
door will unlock the other doors. The interior lamp will turn on
and stay on for thirty (30) seconds.
[CF73700(ALL)05/96]
By pressing the LOCK button on the transmitter once, all the
doors will lock, the parking lamps flash twice and the horn
chirps. When the LOCK button is pushed with all the doors
locked, the parking lamps flash twice and the horn chirps to
confirm that the doors are already locked.
[CF73800(ALL)01/96]
Using the Panic Alarm
[CF73900(ALL)01/96]
If you are near your vehicle and feel threatened, you may
activate the alarm to call attention to it.
[CF74000(ALL)04/96]
To activate the PANIC alarm, push and hold the PANIC button
on the remote for longer than 1.5 seconds. The horn will sound
and the headlamps and tail lights will flash for thirty (30)
seconds. To turn off the alarm, press the LOCK or UNLOCK
buttons or hold the PANIC button down for longer than 1.5
seconds.
%*
[CF74100(ALL)03/96]
Replacing the Batteries
[CF74200(ALL)01/96]
The remote entry transmitter is powered by two coin type
Sanyo CR2016 3 volt batteries (included). If you notice a
significant decrease in operating range, the batteries should be
replaced. Replacement batteries can be purchased at most
pharmacies, watch stores or at your Ford or Lincoln-Mercury
dealer.
[CF74300(ALL)01/96]
NOTE: The operating range of the remote entry system can
also be affected by weather conditions (such as very
cold temperatures) or structures around the vehicle
(buildings, other vehicles, radio and TV towers, etc.).
Typical operating range will allow you to be up to 49
feet (15 meters) away from your vehicle.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996

Controls and Features
117
*
[CF75100(ALL)01/96]
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC
RULES. OPERATION IS SUBJECT TO THE FOLLOWING
TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE
HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST
ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.
[CF75200(ALL)01/96]
Replacement/Additional Transmitters
[CF75300(ALL)01/96]
In the event a transmitter is lost or an additional remote
transmitter needs to be set, you must change the ID code.
Follow the steps below to change the ID code of your system,
or return the remaining transmitter(s) to your dealer for
reprogramming of your remote entry system. This is necessary
to prevent unauthorized use of the lost transmitter.
[CF75400(ALL)01/96]
ID Code Programming Procedure
[CF75500(ALL)01/96]
NOTE: All transmitters must be programmed (or
reprogrammed) at the same time. If the programming
mode is entered and the transmitters are not
programmed (or reprogrammed) at the same time, they
will not operate with the system.
[CF75600(ALL)01/96]1.
Enter vehicle and close and lock all doors.
[CF75700(ALL)01/96]2.
Insert and remove key from ignition six times within ten (10)
seconds. The instrument panel lights will flash twice.
[CF75800(ALL)01/96]3.
Turn ignition key to the ACC position.
[CF75900(ALL)01/96]4.
Press the LOCK button on the remote transmitter once.
[CF76000(ALL)01/96]5.
To enter additional remote controllers (including the
original), unlock, then lock the driver's door using the power
door lock switch.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996

118
[CF76100(ALL)01/96]6.
Press the LOCK button on a new remote transmitter. The
instrument panel lights will flash twice, indicating code is
entered.
[CF76200(ALL)01/96]7.
Repeat steps 5 and 6 as needed (up to four remote
transmitters may be programmed).
[CF76300(ALL)01/96]
Anti-Theft System (If equipped)
[CF76400(ALL)05/96]
This system helps protect your vehicle against break-ins or theft
by monitoring all doors, the hood and the liftgate lock cylinder.
%*
[CF76500(ALL)01/96]
When an unauthorized entry occurs, the system triggers and
will:
[CF76600(ALL)01/96]
n
flash the headlamps and hazard lamps
*
[CF76700(ALL)01/96]
n
honk the horn
*
[CF76800(ALL)01/96]
n
disable the starting circuit to prevent the vehicle from being
started
[CF76900(ALL)01/96]
To arm the system
*
[CF77000(ALL)01/96]1.
Remove the key from the ignition.
[CF77100(ALL)05/96]2.
Lock the doors by using either the power door lock switch
or by turning the key in either the driver or passenger door
lock cylinder. The parking lights will flash and the horn
chirps to let you know that the system has been armed. The
anti-theft indicator light on the right side of the steering
wheel will light and remain on.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996