1997 MERCEDES-BENZ ML320 audio

CONSTANT MAP MATCHING, FUNCTION - GF82.61-P-2002GI
MODEL 163 as of 1.9.01 with CODE (522) Modular control system (MCS) radio USA with CODE (357)
Navigation system - additional unit with CODE (818b) Single CD player - additional unit with CODE
(491) U.S. version
Models 208, 210GF82.61-P-0002-
02C
Audio 30 APS operating instructionsModels 163, 168,
170, 208, 210GF82.61-P-0002-
03A
Model 203, 209GF82.61-P-0002-
03E
Switch on/off behavior, function GF82.85-P-2006B
Navigation mode, functionModels 163, 168,
170, 208, 210GF82.85-P-2012B
Model 203, 209GF82.85-P-2012EE
Radio operation, function GF82.60-P-2001B
CD-player mode, function GF82.60-P-2002B
Telephone mode, functionModel 209GF82.85-P-2007QA
Volume/tone adjustments, function GF82.60-P-2003B
Loading language, function GF82.61-P-3003B
Basic location finding, function GF82.61-P-3006D
Global positioning system location
finding, function GF82.61-P-3007C
Map-supported location finding,
function GF82.61-P-3008C
Route calculation, function GF82.61-P-3011E
Destination guidance, function GF82.61-P-3012D
Destination guidance in digitalized map
area, function GF82.61-P-4000C
Destination guidance in non-digitalized
map area, function GF82.61-P-4001C
Dynamic route guidance, function GF82.61-P-4003QA
Survey of system components, Audio
30 APS, location/task/design/function GF82.61-P-9998ZZ

2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Electrical System - Body - 163 Chassis
me
Saturday, October 02, 2010 3:30:05 PMPage 76 © 2006 Mitchell Repair Information Company, LLC.

by the navigation processor Integrated Into the radio and navigation module (A2/56) .
During the switch-on phase (software is loaded), only basic map matching is available.
When the ignition is switched off all important location finding parameters are stored for the duration of the
shut-off delay (approx. 60 min) .
The permanent location finding feature uses three procedures which supplement each other ensuring very
precise and reliable location finding:
Basic location finding (dead reckoning)
Map-supported location finding (map matching)
GPS location finding
Manual entry of vehicle location
It is possible to enter the location manually on the operating and display module. This can be useful in the
following cases:
Following vehicle transport
(e.g. ferry or train) or
when GPS reception is not present when trip is started
LOADING LANGUAGE, FUNCTION - GF82.61-P-3003B
MODEL 163, 168, 170, 203.0 /2 /7, 208, 209.3 /4, 210 with CODE (353) Audio 30 APS
Function
The data for navigation voice output is stored originally on the navigation DVD. They are transmitted with the
help of the DVD drive of the radio (A2) into the memory of the navigation processor and are then available
anytime for navigation.
The language is reloaded in the following cases:
Basic location finding,
function GF82.61-P-3006GI
Global positioning system
location finding, function GF82.61-P-3007GI
Map-supported location
finding, function GF82.61-P-3008GI
Radio and navigation
module, location/purpose/
design/function GF82.61-P-4109GI

2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Electrical System - Body - 163 Chassis
me
Saturday, October 02, 2010 3:30:05 PMPage 78 © 2006 Mitchell Repair Information Company, LLC.

automatically, after voltage to the radio (A2) was interrupted
manually, by activating the "SPRA" menu in the navigation mode
Loading the language requires approx. 20 s.
If the system is switched off while loading the language, the language data is lost and must be reloaded again.
Avoid strong vibrations to the vehicle (e.g. extremely bumpy roads) while the language is being loaded.
The navigation processor is integrated in the radio (A2).
BASIC LOCATION FINDING, FUNCTION - GF82.61-P-3006D
MODELS 163, 168, 170, 203.0 /2 /7, 208, 209.3 /4, 210 with CODE (353) Audio 30 APS
Basic representation of the basic location finding shown on model 210
Basic location finding (dead reckoning) is the basic function of continuous location finding. It is permanently
carried out by the navigation processor that is integrated in the radio (A2) when the ignition is switched on
(approx. once per second) and is irrespective of the data of the DVD map. After switching off the ignition, the
current position is stored for the duration of the system shut-off delay time.
Fig. 46: Identifying Basic Location Finding Function

The following information is calculated with the aid of basic location finding:
Distance traveled
Absolute vehicle direction (compass direction)
Direction of travel (forward or reverse)
Calculation of distance traveled
The navi
gation processor receives the wheel speed signal of the following components:
Route calculation,
function GF82.61-P-3011E

2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Electrical System - Body - 163 Chassis
me
Saturday, October 02, 2010 3:30:05 PMPage 79 © 2006 Mitchell Repair Information Company, LLC.

The navigation processor recognizes the direction of motion (forward or reverse) from the reverse signal.
Direction in which vehicle is pointing
From the data of the gyrosensor and the sequence of the locations calculated with GPS the navigation
processor the calculates the direction in which the vehicle is pointing (compass direction).
The difference between calculated and actual distance traveled between two turning points is used for automatic
recalibration of the tire circumference (required due to tire wear).
Location finding errors during basic location finding
Rolling backwards without the reverse gear engaged is evaluated as forward motion, and may lead to an error in
the location finding.
Rolling with the ignition switched off or vehicle transportation also falsify map matching.
In both cases the deviation is automatically corrected by the navigation processor after receiving GPS data .
Calibration
Wheel calibration is not required following tire change.
GLOBAL POSITIONING SYSTEM LOCATION FINDING, FUNCTION - GF82.61-P-3007C
MODEL 163, 168, 170, 203.0 /2 /7, 208, 209.3 /4, 210 with CODE (353) Audio 30 APS
Basic representation of the GPS location finding shown on model 210
Global positioning system
location finding, function GF82.61-P-3007GI
Map-supported location
finding, function GF82.61-P-3008GI
Guidance, function GF82.61-P-3012GI
Radio and navigation
module, location/purpose/
design/function GF82.61-P-4109GI

2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Electrical System - Body - 163 Chassis
me
Saturday, October 02, 2010 3:30:05 PMPage 82 © 2006 Mitchell Repair Information Company, LLC.

MAP-SUPPORTED LOCATION FINDING, FUNCTION - GF82.61-P-3008C
MODEL 163, 168, 170, 203.0 /2 /7, 208, 209.3 /4, 210 with CODE (353) Audio 30 APS
Basic representation of the map-supported location finding shown on model 210
Map-supported location finding (map matching) is available only in the digitized area of the DVD map.
A deviation can be recognized and corrected automatically by comparing the calculated position of the vehicle
with the possible positions on the DVD map.
Fig. 50: Identifying Map
-Supported Location Finding Function
Function
The position of the vehicle is continuously followed on the DVD map by the navigation processor. A number of
alternative routes are calculated preliminarily in the digitized area of the DVD map. If the route driven varies
from one of the possible routes, the position coordinates for basic location finding are corrected where
necessary.
The navigation processor is integrated in the radio (A2).
Loading the DVD map data
The navigation processor has a read/write memory (RAM) for storing the DVD map data. However, this
memory is not large enough to store the entire DVD map (currently approx. 10 %). For this reason, the
navigation processor loads into the memory only the map data required for route guidance.
Here, different storage methods are used depending on whether the destination is in the near vicinity of the
vehicle or further away:
The followin
g methods are used to store the data:
location/purpose/
design/function

2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Electrical System - Body - 163 Chassis
me
Saturday, October 02, 2010 3:30:05 PMPage 86 © 2006 Mitchell Repair Information Company, LLC.

If the destination is in the near vicinity, a map area is loaded within a radius of approx. 100 km of the
vehicle location ("Local area").
For destinations further away, an area is selected surrounding the vehicle location, the destination and the
concrete route to the destination ("Corridor formation").
After storing the map data, the DVD with the map data can be taken out of the drive. Now, audio CDs can also
be played.
If the driver deviates too far from the calculated route during the course of navigation system and thereby leaves
the map area stored in the navigation processor, it may be necessary to insert the DVD again in order to
calculate a new route. The navigation processor requests this automatically.
Location errors
The errors are classified into 2 categories:
Incorrect position indication between 2 driving instructions (may not occur more than once every 500
km)
Incorrect driving instruction (may not occur more than once every 1,000 km)
MAP-SUPPORTED LOCATION FINDING, FUNCTION - GF82.61-P-3008GI
MODEL 163 as of 1.9.01 with CODE (522) Modular control system (MCS) radio USA with CODE (357)
Navigation system - additional unit with CODE (818b) Single CD player - additional unit with CODE
(491) U.S. version
General
Map-supported location finding is available only in the digitized area of the CD-ROM map.
By comparing the calculated vehicle position with the CD-ROM map it is possible to recognize and
automatically correct the deviation.
Function
The vehicle position is permanently followed by the navigation processor on the CD-ROM map. If the route
deviates from the calculated route the position coordinates of the basic location finding are corrected if
necessar
y.
Global positioning
system location finding,
function GF82.61-P-3007C

2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Electrical System - Body - 163 Chassis
me
Saturday, October 02, 2010 3:30:05 PMPage 87 © 2006 Mitchell Repair Information Company, LLC.

Fig. 51: Identifying Map-Supported Location Finding Function
ROUTE CALCULATION, FUNCTION - GF82.61-P-3011E
MODEL 163, 168, 170, 203.0 /2 /7, 208, 209.3 /4, 210 with CODE (353) Audio 30 APS
Once the destination is entered into the radio (A2) the route is calculated by the integrated navigation processor
and constantly updated. This can only be calculated within the digitalized map areas. The calculated route is the
prerequisite of the destination guidance system.
Route calculation, function
The navigation processor calculates the route based on the entered destination and with the aid of the DVD map
data while constantly finding the location. In the calculation, it takes into account the roads and attributes
available on the DVD card and their attributes, such as one-way streets, bans on turns, road classes, etc. (where
present).
Additionally, it is possible for the operator to indicate how the route is to be calculated:
Fastest route
Shortest route
Own adjustments
In the event of "OWN ADJUSTMENTS", the following stretches can be blocked from the route calculation:
FREEWAY
Basic location finding,
function GF82.61-P-3006GI
Global positioning system
location finding, function GF82.61-P-3007GI
Guidance, function GF82.61-P-3012GI
Radio and navigation
module, location/purpose/
design/function GF82.61-P-4109GI

2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Electrical System - Body - 163 Chassis
me
Saturday, October 02, 2010 3:30:05 PMPage 88 © 2006 Mitchell Repair Information Company, LLC.

and the momentary position. When calculating it considers the roads and attributes such as one-way streets,
turning prohibitions, street classes,....(if present) read in from the CD-ROM map. Thereby it is possible for the
user to determine in which way the route is to be calculated:
Maximize freeways
Shortest route
Minimize freeways
Minimize toll roads
Following route calculation the navigation processor sets up a list of the roads and junctions to be taken. This
route list is used for guidance. It can be displayed by calling up the menu " LIST ".
Route updating
If the driver deviates from the calculated route, a new route list is calculated by the navigation
processor. The current position and the direction of travel are taken into consideration, and the
new route is optimized accordingly. If the driver wants to deviate from the route, the calculation
processor calculates a new route by pressing the multifunction key "DETR " (detour).
On freeways the newly calculated route starts within approx. 5 miles and on highways within approx. 1 mile ".
Detouring traffic jams, construction sites with "Avoid Road " function.
When approaching a traffic jam, a construction site etc., it is possible to set up a new route calculation
detouring the hindrance before the reaching the corresponding route section.
For this purpose press" NAVI MENU " button. Select "Route" with the aid of the" joystick " and then select"
Avoid Road ". Select road to be avoided in the list displayed then.
If more roads are to be avoided proceed with " Continue to Avoid Roads ". If the newly calculated route is
acceptable confirm with " Reroute ". Then confirm in " Continue Trip to " menu with Enter.
DESTINATION GUIDANCE, FUNCTION - GF82.61-P-3012D
MODEL 163, 168, 170, 203.0 /2 /7, 208, 209.3 /4, 210 with CODE (353) Audio 30 APS
Digitized DVD map area
Guidance, function GF82.61-P-3012GI
Radio and navigation
module, location/purpose/
design/function GF82.61-P-4109GI

2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Electrical System - Body - 163 Chassis
me
Saturday, October 02, 2010 3:30:05 PMPage 90 © 2006 Mitchell Repair Information Company, LLC.