1997 MERCEDES-BENZ ML320 engine

GF54.30-P-2001A
Indicator / warning displays, function
24.10.96

MODEL
129, 140 as of 1.6.96,

163, 168, 170,

202 as of 1.8.96,

208 up to 31.7.99,

210 as of 1.6.96 up to 30.6.99

The table below lists the various warning alarms and indications

according to type (visual/acoustic) and their actuation (direct/CAN).

Visual warning and indicator signals actuated over direct lines:
D
Left turn signal indicator lamp (A1e1)

D
Right turn signal indicator lamp (A1e2)

D
High beam indicator lamp (A1e3)

D
Fuel reserve warning lamp (A1e4)

D
Brake fluid / parking brake warning lamp (A1e7) (except model

163)

D
Low windshield washer fluid level warning lamp (A1e13) (as of

01.09.01 also valid for model 163)

D
Low engine coolant level warning lamp (A1e11) (except model

168, model 163 as of 3.99)

D
Coolant level and temperature warning lamp (A1e11) (only model

168 as of 9.99 and only coolant level function)

D
Generator charge indicator/warning lamp (A1e5)

D
Seat belt warning lamp (A1e9)

D
Seatbelt/backrest lock warning lamp (A1e9)

D
Exterior lamp failure indicator lamp (A1e14)

-----------------------------------------------------------------------------------------
D

Hydraulic fluid level warning lamp (A1e37)

D
ADS warning lamp, suspension (A1e27)

D
Steering lock warning lamp (A1e40) (only

I
)

D
SRS airbag malfunction indicator lamp (A1e15)

D
AIRBAG OFF indicator lamp (A1e56), only model 163 except

I

Also refer to document: Indicator and warning signals triggered

over CAN data lines
Acoustic warning and indicator signals actuated over direct

lines:
D
Turn signal ticker

D
Seat belt reminder

D
Switched-on lights reminder

D
Key warning

D
Soft top warning, only model 170


Also refer to document: Acoustic warnings, function

Acoustic warning and indicator signals actuated over CAN data

lines:
D
Parking brake warning

D
Vehicle speed warning

D
Vehicle speed limit warning

D
Gear warning, only model 168


Also refer to document: Acoustic warnings, function

Indicator and warning signals triggered over

direct lines

GF54.30-P-3002A

Indicator and warning signals triggered over

CAN data lines

GF54.30-P-3003A
Acoustic warnings, function
GF54.30-P-3010A

Copyright DaimlerChrysler AG 04.06.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1

GF54.30-P-2001A
Indicator / warning displays, function
24.10.96

MODEL
129, 140 as of 1.6.96,

163, 168, 170,

202 as of 1.8.96,

208 up to 31.7.99,

210 as of 1.6.96 up to 30.6.99

The table below lists the various warning alarms and indications

according to type (visual/acoustic) and their actuation (direct/CAN).

Visual warning and indicator signals actuated over direct lines:
D
Left turn signal indicator lamp (A1e1)

D
Right turn signal indicator lamp (A1e2)

D
High beam indicator lamp (A1e3)

D
Fuel reserve warning lamp (A1e4)

D
Brake fluid / parking brake warning lamp (A1e7) (except model

163)

D
Low windshield washer fluid level warning lamp (A1e13) (as of

01.09.01 also valid for model 163)

D
Low engine coolant level warning lamp (A1e11) (except model

168, model 163 as of 3.99)

D
Coolant level and temperature warning lamp (A1e11) (only model

168 as of 9.99 and only coolant level function)

D
Generator charge indicator/warning lamp (A1e5)

D
Seat belt warning lamp (A1e9)

D
Seatbelt/backrest lock warning lamp (A1e9)

D
Exterior lamp failure indicator lamp (A1e14)

-----------------------------------------------------------------------------------------
D

Hydraulic fluid level warning lamp (A1e37)

D
ADS warning lamp, suspension (A1e27)

D
Steering lock warning lamp (A1e40) (only

I
)

D
SRS airbag malfunction indicator lamp (A1e15)

D
AIRBAG OFF indicator lamp (A1e56), only model 163 except

I

Also refer to document: Indicator and warning signals triggered

over CAN data lines
Acoustic warning and indicator signals actuated over direct

lines:
D
Turn signal ticker

D
Seat belt reminder

D
Switched-on lights reminder

D
Key warning

D
Soft top warning, only model 170


Also refer to document: Acoustic warnings, function

Acoustic warning and indicator signals actuated over CAN data

lines:
D
Parking brake warning

D
Vehicle speed warning

D
Vehicle speed limit warning

D
Gear warning, only model 168


Also refer to document: Acoustic warnings, function

Indicator and warning signals triggered over

direct lines

GF54.30-P-3002A

Indicator and warning signals triggered over

CAN data lines

GF54.30-P-3003A
Acoustic warnings, function
GF54.30-P-3010A

Copyright DaimlerChrysler AG 05.06.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1

GF54.30-P-3003A
Indicator/warning messages triggered via CAN data buses, function
24.10.96

MODEL
129, 140 as of 1.6.96,

163, 168, 170,

202 as of 1.8.96,

208 up to 31.7.99,

210 as of 1.6.96 up to 30.6.99

Indicator and warning displays triggered via CAN

Low brake fluid level/parking brake indicator lamp (A1e7)
The parking brake signal comes from the traction system

control module.

The brake fluid signal comes directly from the switch (S11)

(except model 163).

Brake pad wear indicator lamp (A1e6)

The parking brake signal comes from the traction system

control module (N47)

Low engine oil level indicator lamp (A1e12)

The oil level signal comes from the injection system control

module (N3).

For vehicles with ASSYST, also refer to document: ASSYST

engine oil monitoring.

Preglow indicator lamp (A1e16)

The signal comes directly from the injection system control

module (N3).

Coolant level and temperature warning lamp (A1e11) model 168

only as of 9.99
The coolant temperature signal comes from the injection

system control module (N3)

-----------------------------------------------------------------------------------------
ABS MIL (A1e17)

The parking brake signal comes from the traction system

control module (N47).

"CHECK ENGINE" MIL (A1e26),


I
only

The signal comes from the injection system control module (N3)

ETS (A1e35) or ASR (A1e22) or ESP (A1e42) MIL
Lamp illuminated if there is a fault in the respective system.

The signal comes from the traction system control module

(N47).

ETS (A1e36) or ASR (A1e21) or ESP (A1e41) warning lamp
The lamp indicates that the respective system is active.

The signal comes from the traction system control module

(N47).

-----------------------------------------------------------------------------------------

Severe leak warning (

I
as of 97 only)

The fuel reserve indicator lamp (A1e4) flashes. The signal

comes from the injection system control module (N3).

The warning takes place at the earliest 30 minutes after cold

start with the engine idling and the vehicle stationary.

Also refer to document: Purge system with leak test, function
Fog lamps indicator lamp (A1e57), model 163 only except
I
)

The signal comes from the All-activity module (AAM, N10)

"LOW RANGE" indicator lamp (A1e53), model 163 only
The signal comes from the transfer case control module (N78)

Active service system (ASSYST)
Engines 112, 113, 611 (engines with oil

sensor)

GF00.20-P-2009A

Engine oil monitoring, function
Model 210 as of 01.03.97 with engine M111,

OM602, OM604, OM605 and OM606

As of 06.97 models 129, 140, 170, 202 except

engines 112, 113, 611

(Valid for engines with low oil level switch).
GF00.20-P-2009B

Displaying coolant temperature, function
Model 168 as of 9.99

GF54.30-P-3020GC

Purge system with leak test, function

GF47.30-P-3016L

Bus systems, overall function

GF54.00-P-0004A

Copyright DaimlerChrysler AG 04.06.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1

GF54.30-P-3002A
Indicator and warning signals triggered over direct lines, function
24.10.96

MODEL
129, 140 as of 1.6.96,

163, 168, 170,

202 as of 1.8.96,

208 up to 31.7.99,

210 as of 1.6.96 up to 30.6.99

Indicator and warning signals

Indicator lamps for left turn signal (A1e1) and right turn signal

(A1e2)
The signal in models 129, 140, 170, 202 comes from the

combination relay (turn signals with trailer coupling, rear

window defroster, wiper motor, anti-theft alarm system)

(N10/2), and in model 210 from the multifunction control

module (N10-1) or the driver's side signal acquisition and

actuation module (SAM) (N10/1).

In model 168 the entire turn signal control is located in the

instrument cluster (A1).

Brake fluid / parking brake warning lamp (A1e7)

The signal for the brake fluid comes direct from the brake fluid level switch (S11) (except model 163).

(The signal for the parking brake comes over CAN.)

Low windshield washer fluid level warning lamp (A1e13) except

models 163 and 168
See

document: Coolant/washer fluid level voltage coding, task /

function

-----------------------------------------------------------------------------------------
Low windshield washer fluid level warning lamp (A1e13) as of

01.09.01 for model 163
See document: Displaying washer fluid level, function

Low engine coolant level warning lamp (A1e11) except models

163 and 168
See

document: Coolant/washer fluid level voltage coding, task /

function

Low engine coolant level warning lamp (A1e11) model 163 as of

3.99
See

document: Displaying coolant level, function

Coolant level and temperature warning lamp (A1e11) model 168

as of 9.99
See

document: Displaying coolant level, function

Fuel reserve warning lamp (A1e4)
When the reserve fuel level is reached, this lamp lights up and

goes out again only after refueling is detected. If the vehicle is

refueled with the ignition ON, refueling is detected only if at

least 7 liters of fuel are added.

-----------------------------------------------------------------------------------------

AIRBAG OFF indicator lamp (A1e56), only model 163 except

I

The signal comes from the emergency tensioning retractor

(ETR) control module with airbag (AB, N2/2)

Generator charge indicator/warning lamp (A1e5)

See document: Terminal 61 and terminal 61e, charge indicator

lamp, exterior lamp failure, function

Seatbelt/backrest lock warning lamp (A1e9)

The seat belt warning lamp is only used in a few national

versions, and is actuated direct by a seat belt buckle switch
(normally closed contact). After engine start, the lamp flashes

for a short time (approx. 6 seconds).

In model 129 if this lamp fails to go out after flashing briefly, but

continues to shine constantly, then the seat backrest is not

locked.
Exterior lamp failure indicator lamp (A1e14)

The signal comes from the lamp failure monitor

See document: Terminal 61 and terminal 61e, charge indicator

lamp, exterior lamp failure, function
Hydraulic fluid level warning lamp (A1e37)
The signal comes direct from the ADS level control oil level

switch (S44).

ADS warning lamp, suspension (A1e27) The signal comes from the ADS control module, suspension
(N51).

SRS airbag malfunction indicator lamp (A1e15)
The signal comes from the emergency tensioning retractor

(ETR) control module with airbag (AB, N2/2)

Voltage coding of coolant / windshield washer

fluid level, function
Except models 163 and 168

GF54.30-P-3006A

Displaying coolant level, function
Model 163 as of 3.99

GF54.30-P-3028GH

Model 168 as of 9.99

GF54.30-P-3028GC

Terminal 61 and terminal 61e, charge

indicator lamp, exterior lamp failure, function

GF54.30-P-3007A

Copyright DaimlerChrysler AG 04.06.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1

AR54.30-P-6049GH
Removing and installing bulbs of instrument cluster
21.1.97

MODEL
163

P54.30-0632-06

Instrument cluster

A1e1
Left turn signal indicator lamp

A1e2
Right turn signal indicator lamp

A1e3
High beam indicator lamp

A1e4
Fuel reserve indicator lamp

A1e5
Generator charge indicator lamp

A1e6
Brake pad wear indicator lamp

A1e7
Low brake fluid level/parking brake

indicator lamp

A1e8
Instrument illumination

A1e9
Seat belt reminder lamp

A1e11
Low ECL indicator lamp

A1e12
Low engine oil level indicator lamp

A1e15
SRS MIL

A1e17
ABS MIL

A1e21
ASR warning lamp

A1e26
"CHECK ENGINE" MIL

A1e35
ETS MIL

A1e36
ETS warning lamp

A1e40
Steering lock warning lamp

A1e42
ESP MIL

Removing, installing

1
Disconnect ground cable from battery

To prevent the disconnected ground cable

contacting the ground point W16/4

unintentionally, insulate ground cable terminal.

AR54.10-P-0003A

2
Remove instrument cluster

AR54.30-P-6015GH

3
Remove bulbs


AR54.30-P-6049-01Z


Installation:
Install bulbs
AR54.30-P-6049-02Z

4
Install in opposite order


129 589 00 09 00 129 589 01 09 00

Socket
Socket

Copyright DaimlerChrysler AG 09.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1

AD54.30-P-5000GH
Instrument cluster (IC) diagnosis troubleshooting
10.4.97

MODEL
163

Connection and use of test equipment

AD00.00-P-1000AZ

Instrument cluster diagnosis, previous

knowledge

AD54.30-P-2000GH

Explanatory notes on diagnosis

troubleshooting chart IC

AD54.30-P-5000-01GH

Display instruments controlled via CAN

troubleshooting chart IC

AD54.30-P-5000-02A

Display instruments controlled directly,

troubleshooting chart IC

AD54.30-P-5000-03A

Troubleshooting

Complaint
Possible cause
Notes
Remedy/Test step

Instrument cluster (A1) completely inoperative
Voltage supply, instrument cluster (A1)

AD54.30-P-6000-01GH

Malfunction indicator lamps or indicator lamps

inoperative
Voltage supply, instrument cluster (A1)
AD54.30-P-6000-01GH

HHT and instrument cluster cannot

communicate
Cables, instrument cluster (A1)

AD54.30-P-6000-02GH

Low brake fluid level/parking brake indicator

lamp, brake pad wear indicator lamp, ABS

MIL, malfunction indicator lamp (ETS, ASR,

ESP) come on together and speedometer

remains on lower stop.
Traction system control module (N47)

AD42.35-P-1001BZ

RPM counter, engine coolant gauge remain

on the lower stop and the low engine oil level

indicator lamp comes on.
Injection system control module (N3)

AD07.61-P-1000AZ
Low brake fluid level/parking brake indicator

lamp, brake pad wear indicator lamp, low

engine oil level indicator lamp, ABS MIL,

malfunction indicator lamp (ETS, ASR, ESP)

come on together and RPM counter, engine

coolant gauge and speedometer remain on

lower stop.
CAN faulty

AD54.30-P-6000-04GH
AD54.30-P-6000-05GH

Steering lock warning lamp (A1e40) is

continuously illuminated or is inoperative.
Cables,

steering lock switch (S97/1)

AD54.30-P-6000-06GH

Coolant level indicator disrupted
Cables,

Coolant level indicator electronic switch (S41)

Model 163 as of 3.98

AD54.30-P-6000-42GH

Copyright DaimlerChrysler AG 05.06.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1

GF54.30-P-0002-01GC
Instrument cluster (IC), block diagram

n

P54.30-0785-06

58
Terminal 58

58d
Terminal 58d

61
Terminal 61

A1
Instrument cluster

X11/4
Data link connector (DTC readout)

a
Engine control module

b
Traction system control module

c
Engine control module inputs, e.g.

ECT sensor

d
Traction system control module

inputs, e.g. wheel speed sensors

e
Direct inputs

f
Transfer case control module (N78)

(model 163 only)

g
Gear recognition module (A61) or

automatic clutch control module

(N15/4) (model 168 only)

Copyright DaimlerChrysler AG 04.06.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1

AF54.30-P-8400A
Instrument cluster indicates: Oil sensor defective, oil level below min. or oil level

above max. with engine running and at operating temperature. No DTC stored.
19.5.98

MODEL
129.0, 163.1, 202.0, 208.3 /4, 210.0 /2 /6, 220.0 /1 with ENGINE 112

MODEL
129.0, 163.1, 202.0, 208.3 /4, 210.0 /2, 220.0 /1 with ENGINE 113

Damage code
Cause
Remedy

54 201 90
Oil low, connector defective or coding error
1
Shut off engine and wait 2 min. (key

position 0)

Instrument cluster indicates oil sensor

defective, oil level below min. or oil level

above max. with engine warm and running.

No DTC stored in DTC memory!

2
Check oil level with oil dipstick

3
Check oil level on instrument cluster:

- Key in steering wheel lock position 2,

engine not running

- Wait until - - - - - - appears on

instrument cluster

- When this is displayed press the reset

button for the tripodometer twice within

1 sec. (display appears only after

expiration of a waiting time (max. 30

min.) depending on engine oil

temperature)

Oil level is at bottom mark on oil dipstick

and instrument cluster indicates:
-1L
, -
1,5L
or -2L
#
4
Add quantity of oil indicated on

instrument cluster display and repeat

test.

Oil level at upper mark on dipstick and

instrument cluster indicates either oil level

okay or -1L
, -
1,5L
, -2L

#
5
Recode instrument cluster

AF54.30-P-8600A

Problem still present
#
6
Check cable to oil sensor, oil sensor
connectors, control module and fuse

box (see wiring diagram) for good contact

Copyright DaimlerChrysler AG 05.06.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1