1997 FORD E SERIES fuel cap

Number Fuse amperage
ratingCircuits protected
8 30 amp Noise supression
capacitor, ignition coil
positive feed, PCM
relay diode/PCM
power relay, fuel
heater (diesel), glow
plug relay (diesel)
9 30 amp Wiper control module,
wiper motor
10 20 amp Headlamp switch
(exterior lamps),
Multi-function switch
(flash-to-pass)
11 15 amp Stoplight switch, brake
pressure switch,
multi-function switch
12 15 amp Digital transmission
range sensor (backup
lamps), auxiliary
battery relay
13 15 amp A/C mode switch,
blend door actuator
14 5 amp Instrument cluster (air
bag and charge
indicator lamps)
15 5 amp Trailer tow battery
charge relay (coil)
16 30 amp Power seats
17 - Not used
18 - Not used
19 10 amp Air bag module
20 5 amp Overdrive cancel
switch
Roadside emergencies
106

these components from the
vehicle when using snow tires
and chains.
WHAT YOU SHOULD KNOW
ABOUT AUTOMOTIVE FUEL
Important safety precautions
Do not overfill the fuel
tank. The pressure in an
overfilled tank may cause
leakage and lead to fuel spray
and fire.
If you do not use the
proper fuel cap, the
pressure in the fuel tank can
damage the fuel system or cause
it to work improperly in a
collision.
The fuel system may be
under pressure. If the fuel
cap is venting vapor or if you
hear a hissing sound, wait until it
stops before completely
removing the cap.
Automotive fuels can
cause serious injury or
death if misused or mishandled.
eco_fuel_info
com_important_precautions.06
Maintenance and care
157

MOTORCRAFT PART NUMBERS
Component Engine application
4.2L 4.6L 5.4L 6.8L
Spark plug AWSF-42EE AWSF-32PP AWSF-22E AWSF-22E
Air filter FA-1632 FA-1632 FA-1632 FA-1632
Oil filter FL-400-S FL-820-S FL-820-S FL-820-S
Fuel filter FG-872 FG-872 FG-872 FG-872
Battery
Standard BXT-65-650 BXT-65-650 BXT-65-650 BXT-65-650
Optional BXT-65-750 BXT-65-750 BXT-65-750 BXT-65-750
Auxiliary BH-65DC BH-65DC BH-65DC BH-65DC
P.C.V. valve EV-152 EV-233 EV-233 EV-233
REFILL CAPACITIES
Fluid Application Capacity
Engine oil (includes
filter change)4.2L engine 5.7L (6.0 qts.)
4.6L engine 5.7L (6.0 qts.)
5.4L engine 5.7L (6.0 qts.)
6.8L engine 5.7L (6.0 qts.)
Engine coolant 4.2L engine 22.0L (23.2 qts.)
4.6L engine 23.7L (25.0 qts.)
5.4L engine 27.4L (29.0 qts.)
6.8L engine 29.0L (30.6 qts.)
Rear axle Ford 8.8º/9.75º
conventional and
Traction-Lok2.6L (5.5 pints)
1
Dana 9.75º (M60-IU) 3.0L (6.3 pints)2
Dana 10.5º (M70-2U) 3.1L (6.6 pints)2
Dana 10.5º M70-1HD) 3.5L (7.5 pints)2
Dana 11.25º (model
80)3.5L (7.5 pints)2
eco_motorcraft_part_numbers
eco_refill_capacities
Capacities and specifications
173

Fluid Application Capacity
Transmission3Automatic (4R70W) 13.1L (13.9 qts.)
Automatic (E4OD) 15.0L (15.9 qts.)
Fuel 138º wheelbase
(except E-Super Duty)132.5L (35.0 gal.)
158º wheelbase
(except E-Super Duty)140L (37.0 gal.)
4
176º wheelbase
(except E-Super Duty)140L (37.0 gal.)4
158º wheelbase
(E-Super Duty)208L (55 .0 gal.)
176º wheelbase
(E-Super Duty)208L (55 .0 gal.)
1Fill 6.4 mm to 14.2 mm (1/4º to
9/16º) below bottom of fill hole.
2Fill Dana rear axles to 1/4º to 3/4º
below bottom of fill hole.
3Always use dipstick to determine
exact fluid requirement.
4Optional tank, 208L (55 gal.).
LUBRICANT SPECIFICATIONS
Item Ford part name Ford part
numberFord
specification
Brake master
cylinderHigh
Performance
DOT 3 Motor
Vehicle Brake
FluidC6AZ-19542-AB ESA-M6C25-A,
DOT 3
Door
weatherstripsSilicone
LubricantC0AZ-19553-AA
and
D7AZ-19553-AAESR-M13P4-A
eco_lubricant_specifications
Capacities and specifications
174

complete refill of Dana
Traction-Lok rear axles.
ENGINE DATA
4.2L ENGINE
Displacement 4.2L (256 cid) V6
Bore X Stroke 96.8 x 95.0 mm (3.81 x 3.74 in.)
Induction Sequential multi-port fuel injection
Ignition Electronic distributorless ignition system
(EDIS)
Firing order 1-4-2-5-3-6
Spark plug gap 1.37 mm (.054 in.)
Compression ratio 9.2:1
4.6L ENGINE
Displacement 4.6L (281 cid) V8
Bore X Stroke 90.2 x 90.0 mm (3.55 x 3.55 in.)
Induction Sequential multi-port fuel injection
Ignition Electronic distributorless ignition system
Firing order 1-3-7-2-6-5-4-8
Spark plug gap 1.37 mm (.054 in.)
Compression ratio 9.0:1
5.4L ENGINE
Displacement 5.4L (330 cid) V8
Bore X Stroke 90.2 x 105.8 mm (3.55 x 4.17 in.)
Induction Sequential multi-port fuel injection
Ignition Coil on plug
Firing order 1-3-7-2-6-5-4-8
Spark plug gap 1.37 mm (.054 in.)
Compression ratio 9.0:1
eco_engine_data
eco_engine_data_4.2
eco_engine_data_4.6
eco_engine_data_5.4
Capacities and specifications
177

6.8L ENGINE
Displacement 6.8L (415 cid) V10
Bore X Stroke 90.2 x 105.8 mm (3.55 x 4.17 in.)
Induction Sequential multi-port fuel injection
Ignition Coil on plug
Firing order 1-6-5-10-2-7-3-8-4-9
Spark plug gap 1.37 mm (.054 in.)
Compression ratio 9.0:1
eco_engine_data_6.8
Capacities and specifications
178

Fuel informationUnleaded only - 87 octane
Fuel tank capacityRefer to Refill capacitiesin theCapacities and
specificationschapter.
Engine oil
specificationsUse only oil displaying the American Petroleum
Institute Certification Mark SAE 5W-30
Tire size and
pressureSee Safety Compliance Certification Label on
inside of driver door
Hood release
locationBottom left of driver side instrument panel
Fuel filler locationLeft rear of vehicle
eco_filling_station
Filling station information
192