46-53
With spring clip for the brake light switch
Note:
The switch must be installed only once in order to assure that it is
adequately tight.
Adjusting switch
Note: 1 - Stop surface of brake pedal
2 - Spring clip
Press into pedal cluster from behind
3 - Pedal cluster
4 - Brake light switch -F-
a - Clearance: max. 0.7 mm (0.028 in.)
- Insert switch -4- into installed clip -2- and press in to stop.
As a result of this step, the brake pedal must not be under preload.If necessary, turn switch back somewhat, noting clearance -a-.
Pa
ge 9 of 10 Brake
pedal, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU03.46.7
46-54
Cruise Control System (CCS) vent valve,
adjusting
- Insert vent valve into clip and push through to
stop.
- Push back valve by pulling back brake pedal or
clutch pedal to stop.
Note:
Only install the valve one time, otherwise an
adequately tight fit cannot be assured.
Version with spring clip for the vent valve
- Same procedure as for the brake light switch
page 46-53
.
Pa
ge 10 of 10 Brake
pedal, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU03.46.7
