46-46
Brake pedal, removing and
installing
Removing and installing vacuum servo unit with
brake master cylinder page 47
-34
CAUTION!
Before disconnecting the hydraulic line, protect the plenum chamber
from brake fluid flowing out. - Unbolt hydraulic line -1- for clutch master cylinder.
- Disconnect supply hose from elbow of master cylinder.
- Remove nut -1- at universal joint.
-
Loosen eccentric by turning bolt (Torx T50) clockwise, and remove
bolt.
Pa
ge 1 of 10 Brake
pedal, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU03.46.7
