Stereo Sound System
CD Changer Removal
1. Open the trunk lid.
2. Push the lock lever.
3. Remove the mounting bolt.
4. Remove the DIN cord from the CD changer.
CD CHANGER
5. Remove the CD changer bracket mounting nuts,
then remove the CD changer.
6. Install in the reverse order of removal.
NOTE: When you check a right taillight, perform bulb
check of a right taillight according to the following pro-
cedures.
1. Push the lock lever.
2. Loosing the mounting bolt.
3. Take down the CD changer.ProCarManuals.com
Stereo Sound System
Unit Terminals
For MAST
ANTENNA
DIN CONNECTOR
(for CD CHANGER)
For WINDOW
ANTENNA
Terminal Wire
Connects to
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
A15
A16
WHT
WHT
RED/BLK
WHT/YEL
YEL/RED
PNK/WHT
WHT
WHT
ORN
ORN
ORN/WHT
BLK/BRN
BLK/LT GRN
BLK
ORN
ORN
Passenger's door speaker amplifier
Driver's door speaker amplifier
Lights-on signal
Constant power (Tuning memory)
ACC (I) (Main stereo power supply)
Radio switched power (To antenna and
relay)
Foot well bass speaker (Driver's )
Foot well bass speaker (Passenger's )
Passenger's door speaker amplifier
Driver's door speaker amplifier
Cellular phone mute signal
Security (IN)
Security ground (G404)
Ground (G401, G402, G403)
Foot well bass speaker (Driver's )
Foot well bass speaker (Passenger's )
Power Amplifier Relay Test
1. Remove the power amplifier relay from under-hood
relay box B.
2. Check continuity at the relay terminals.
There should be continuity between the C and D
terminals.
There should be continuity between the A and B
terminals when power and ground are connect-
ed to the C and D terminals.
There should be no continuity between the A and
B terminals when power is disconnected.ProCarManuals.com
