BO47Y-01
BO0020
N00132
N12057
BO2455
Cotton
TapePanel
Cover
N12580
4 Door: 6 Clips
2 Door: 7 Clips
2 Door only
- BODYFRONT DOOR
BO-1 1
1996 TERCEL (RM440U)
DISASSEMBLY
1. w/o Power Window:
REMOVE REGULATOR HANDLE
Pull off the snap ring with a shop rag and remove the regulator
handle and plate.
2. REMOVE DOOR INSIDE HANDLE
(a) Remove the screw and slide the inside handle forward.
(b) Disconnect the inside handle from the control link and re-
move the inside handle.
3. REMOVE OUTSIDE REAR VIEW MIRROR
(a) w/ Manual Remote Control Mirror:
Remove the screw and the knob.
(b) Using a screwdriver, pry off the cover, as shown.
HINT:
Tape the screwdriver tip before use.
NOTICE:
Make sure you pry off the cover from the correct position.
(c) Remove the 3 nuts and the mirror.
4. w/ Power Window:
REMOVE ARMREST PANEL
5. REMOVE ARMREST COVER
6. REMOVE DOOR TRIM
7. REMOVE SPEAKER
8. REMOVE SERVICE HOLE COVER
Remove the 2 grommets.
HINT:
Bring out the links through the service hole cove.
9. REMOVE DOOR BELT MOULDING
Pry out the clips from the edge of the weatherstrip and remove
the weatherstrip.
10. REMOVE DOOR GLASS RUN
11. REMOVE DOOR GLASS
12. REMOVE FRONT LOWER FRAME
