Z03128
Vinyl Tape
R11057
SST
SR4264
SST
- STEERINGPOWER STEERING GEAR
SR-57
1996 TERCEL (RM440U)
4. INSTALL OIL SEAL
(a) Coat a new oil seal lip with power steering fluid.
(b) To prevent oil seal lip damage, wind vinyl tape on the
steering rack end, and apply power steering fluid.
(c) Install the oil seal by pushing it into the rack housing, with-
out tilting.
NOTICE:
Make sure to install the oil seal facing the correct direction.
5. INSTALL BUSHING AND CYLINDER END STOPPER
(a) Install a new bushing to the stopper.
(b) Using SST, torque the stopper.
SST 09631-20090
Torque: 59 N´m (600 kgf´cm, 43 ft´lbf)
(c) Using a punch and a hammer, stake the stopper and rack
housing.
6. AIR TIGHTNESS TEST
(a) Install SST to the rack housing.
SST 09631-12071
NOTICE:
Do not install union seats.
(b) Apply 53 kPa (400 mmHg, 15.75 in.Hg) of vacuum for
about 30 seconds.
(c) Check that there is no change in the vacuum.
If there is change in the vacuum, check the installation of the oil
seals.
7. INSTALL CONTROL VALVE ASSEMBLY
(a) Coat the teflon rings with power steering fluid.
(b) Push the valve assembly into the rack housing.
