DI4MZ-01
THEFT DETERRENT SYSTEM Check Sheet
Inspector 's name:
Customer 's Name
Date of VehicleRegistration No.
Registration Year
Frame No.
Odometer Reading / /km
Mile
Weather Conditions
When Problem
Occurred Frequency Problem OccursWeather
Outdoor temperature
/ /
Constant Sometimes ( Times per day, month)
Once only Brought in
Theft deterrent system cannot be set.
Indicator light does not flash when the theft deterrent system is set.
(It stays on or does not light at all.)
Theft deterrent system
does not operate. When unlocked using the
door lock knob.
When the engine hood is
opened.
System cannot be
canceled once set. When door is unlocked using key or wireless door lock control system.
When the key is inserted in the ignition key cylinder and turned to ACC or ON
position.
(However, only when the system has never operated)
When the luggage compartment door is opened with the key.
System cannot be
canceled during warning
operation. When door is unlocked using key or wireless door lock control system.
When the key is inserted in the ignition key cylinder and turned to ACC or ON
position.
Warning operation starts when the system is set and the door or luggage compartment door is opened with
the key.
Others.
Date Problem First Occurred
Fine Cloudy Rainy Snowy
Various/Others
Hot Warm Cool
Cold (Approx. 5F ( 5C))
Problem Symptom
Malfunction
Horns only
Theft deterrent horn only
Headlights only
Taillights only
Starter cut only
Door lock operation only
DI-216
- DIAGNOSTICSTHEFT DETERRENT SYSTEM
1996 TERCEL (RM440U)
CUSTOMER PROBLEM ANALYSIS CHECK
BE26P-01
BE-32
- BODY ELECTRICALCOMBINATION METER
1054 Author: Date:
1996 TERCEL (RM440U)
COMBINATION METER
ON-VEHICLE INSPECTION
1. INSPECT SPEEDOMETER ON-VEHICLE
Using a speedometer tester, inspect the speedometer for allowable indication error and check the operation
of the odometer.
HINT:
Tire wear and tire over or under inflation will increase the indication error.
If error is excessive, replace the speedometer.
USA (mph)CANADA (km/h)
Standard indication Allowable rangeStandard indication Allowable range
20 18 - 24 20 16 - 26
40 38 - 45 40 38 - 48
60 59 - 67 60 56 - 69
80 79 - 88 80 76 - 90
100 100 - 110 100 96 - 110
120 114 - 131
140 134 - 152
160 152 - 174
2. INSPECT TACHOMETER
(a) Connect a tune-up test tachometer, and start the engine.
NOTICE:
Reversing the connection of the tachometer will damage the transistors and diodes inside. When re-
moving or installing the tachometer, be careful not to drop or subject it to heavy shocks.
(b) Compare the tester and tachometer indications.
DC 13.5 V 25°C (68°F)
Standard indication (rpm)Allowable range (rpm)
700610 - 750
3,0002,850 - 3,150
5,0004,850 - 5,150
7,0006,790 - 7,210
If error is excessive, replace the tachometer.
