Page 180 of 2062
Downloaded from www.Manualslib.com manuals search engine SS – SERVICE SPECIFICATIONS
STANDARD BOLT SS-1
MAINTENANCE SS-3
ENGINE MECHANICAL (3RZ-FE) SS-4
ENGINE MECHANICAL (5VZ-FE) SS-9
EMISSION CONTROL (3RZ-FE) SS-14
EMISSION CONTROL (5VZ-FE) SS-16
MFI (3RZ-FE) SS-17
SFI (5VZ-FE) SS-19
COOLING (3RZ-FE) SS-21
COOLING (5VZ-FE) SS-23
LUBRICATION (3RZ-FE) SS-25
LUBRICATION (5VZ-FE) SS-27
IGNITION (3RZ-FE) SS-29
IGNITION (5VZ-FE) SS-31
STARTING (3RZ-FE) SS-33
STARTING (5VZ-FE) SS-35
CHARGING (3RZ-FE) SS-37
CHARGING (5VZ-FE) SS-39
CLUTCH SS-41
MANUAL TRANSMISSION (R150,
R150F) SS-43
MANUAL TRANSMISSION (W59) SS-46
AUTOMATIC TRANSMISSION SS-49
TRANSFER SS-53
PROPELLER SHAFT SS-56
SUSPENSION AND AXLE SS-58
BRAKE SS-69
STEERING SS-71
SUPPLEMENTAL RESTRAINT SYSTEM SS-75
BODY ELECTRICAL SS-77
BODY SS-80
AIR CONDITIONING SS-82
Page 229 of 2062

Downloaded from www.Manualslib.com manuals search engine SS089−02
− SERVICE SPECIFICATIONSAUTOMATIC TRANSMISSION
SS−49
223 Author: Date:
1996 TOYOTA T100 (RM449U)
AUTOMATIC TRANSMISSION
SERVICE DATA
Line pressure (Wheel locked)
(3RZ−FE)
Engine idling
D position
R position
at stall (Throttle valve fully opened)
D position
R position
(5VZ−FE)
Engine idling
D position
R position
at stall (Throttle valve fully opened)
D position
R position
363 − 422 kPa (3.7 − 4.2 kgf/cm2, 53 − 61 psi)
490 − 588 kPa (5.0 − 6.0 kgf/cm2, 71 − 85 psi)
932 − 1,177 kPa (9.5 − 12.0 kgf/cm
2, 135 − 171 psi)
1,294 − 1,638 kPa (13.2 − 16.7 kgf/cm2, 188 − 238 psi)
363 − 422 kPa (3.7 − 4.2 kgf/cm
2, 53 − 61 psi)
608 − 696 kPa (6.2 − 7.1 kgf/cm2, 88 − 101 psi)
902 − 1,147 kPa (9.2 − 11.7 kgf/cm
2, 131 − 166 psi)
1,432 − 1,942 kPa (14.6 − 19.8 kgf/cm2, 208 − 282 psi)
Engine stall revolution (D and R positions) 3RZ−FE
5VZ−FE1,950 ± 150 rpm
2,150 ± 150 rpm
Time lag N → D position
N → R positionLess than 1.2 seconds
Less than 1.5 seconds
Engine idle speed
(A/C OFF and N position)
700 ± 50 rpm
Throttle cable adjustment
(Throttle valve fully opened)Between boot end face and inner cable stopper
0 − 1 mm (0 − 0.04 in.)
Drive plate runoutMax.
Torque converter runoutMax.
Torque converter installation distance 3R−FE
5VZ−FE0.20 mm (0.0079 in.)
0.30 mm (0.0118 in.)
More than 31.75 mm (1.2500 in.)
More than 17.95 mm (0.7067 in.)
Speedometer driven gear oil seal drive in depth 3RZ−FE
5VZ−FE20 mm (0.79 in.)
20 mm (0.79 in.)
Lock−up point
(3RZ−FE / A340E)
D position
(Throttle valve opening 5%) Lock−up ON
Lock−up OFF
(5VZ−FE / A340E)
D position
(Throttle valve opening 5%) Lock−up ON
Lock−up OFF
(5VZ−FE / A340F)
(Throttle valve opening 5%) Lock−up ON
Lock−up OFF
83 − 88 km/h (52 − 55 mph)
70 − 75 km/h (44 − 47 mph)
79 − 84 km/h (49 − 52 mph)
72 − 77 km/h (45 − 48 mph)
75 − 80 km/h (47 − 50 mph)
68 − 73 km/h (42 − 45 mph)
Page 230 of 2062

Downloaded from www.Manualslib.com manuals search engine SS−50
− SERVICE SPECIFICATIONSAUTOMATIC TRANSMISSION
224 Author: Date:
1996 TOYOTA T100 (RM449U) Shift schedule
(3RZ−FE / A340E)
D position
(Throttle valve fully opened) 1 → 2
2 → 3
3 → O/D
O/D → 3
3 → 2
2 → 1
(Throttle valve fully closed) 3 → O/D
O/D → 3
2 position
(Throttle valve fully opened) 1 → 2
3 → 2
2 → 1
L position
(Throttle valve fully opened) 2 →1
(5VZ−FE / A340E)
D position
(Throttle valve fully opened) 1 → 2
2 → 3
3 → O/D
O/D → 3
3 → 2
2 → 1
(Throttle valve fully closed) 3 → O/D
O/D → 3
2 position
(Throttle valve fully opened) 1 → 2
3 → 2
2 → 1
L position
(Throttle valve fully opened) 2 →1
(5VZ−FE / A340F)
D position
(Throttle valve fully opened) 1 → 2
2 → 3
3 → O/D
O/D → 3
3
→ 2
2 → 1
(Throttle valve fully closed) 3 → O/D
O/D → 3
2 position
(Throttle valve fully opened) 1 → 2
3 → 2
2 → 1
L position
(Throttle valve fully opened) 2 →1
55 − 60 km/h (34 − 37 mph)
99 − 108 km/h (62 − 67 mph)
127 − 136 km/h (79 − 85 mph)
120 − 130 km/h (75 − 81 mph)
92 − 98 km/h (57 − 61 mph)
44 − 48 km/h (27 − 30 mph)
34 − 39 km/h (21 − 24 mph)
25 − 30 km/h (16 − 19 mph)
55 − 60 km/h (34 − 37 mph)
110 − 120 km/h (68 − 75 mph)
44 − 48 km/h (27 − 30 mph)
53 − 58 km/h (33 − 36 mph)
57 − 62 km/h (35 − 39 mph)
108 − 117 km/h (67 − 73 mph)
146 − 155 km/h (91 − 96 mph)
139 − 148 km/h (86 − 92 mph)
99 − 108 km/h (62 − 67 mph)
46 − 51 km/h (29 − 32 mph)
44 − 49 km/h (27 − 30 mph)
22 − 27 km/h (14 − 17 mph)
57
− 62 km/h (35 − 39 mph)
115 − 124 km/h (71 − 77 mph)
46 − 51 km/h (29 − 32 mph)
52 − 58 km/h (32 − 36 mph)
55 − 59 km/h (35 − 39 mph)
103 − 111 km/h (64 − 69 mph)
139 − 147 km/h (86 − 91 mph)
133 − 141 km/h (83 − 88 mph)
95 − 103 km/h (59 − 64 mph)
44 − 48 km/h (27 − 30 mph)
42 − 47 km/h (26 − 29 mph)
21 − 26 km/h (13 − 16 mph)
55 − 59 km/h (34 − 37 mph)
110 − 118 km/h (68 − 73 mph)
44 − 48 km/h (27 − 30 mph)
53 − 58 km/h (33 − 36 mph)
Page 231 of 2062

Downloaded from www.Manualslib.com manuals search engine SS08A−03
− SERVICE SPECIFICATIONSAUTOMATIC TRANSMISSION
SS−51
1996 TOYOTA T100 (RM449U)
TORQUE SPECIFICATION
Part tightenedN·mkgf·cmft·lbf
Valve body x Transmission case101007
Oil strainer x Valve body (A340E)5.45548 in.·lbf
Oil strainer case x Valve body (A340F)101007
Oil strainer x Valve body (A340F)6.97061 in.·lbf
Oil pan7.47565 in.·lbf
Drain plug2020515
Parking lock pawl bracket x Transmission case7.47565 in.·lbf
Extension housing x Transmission case (A340E)3637027
Extension housing x Rear mounting insulator2525018
Rear support member x Rear mounting insulator (A340F)1818013
Rear support member x Body (A340F)9597070
Rear mounting insulator x Rear mounting bracket (A340E)1818013
Rear mounting bracket x Frame (A340E)5859042
Propeller shaft x Rear differential (A340E)7475054
Front propeller shaft x Front differential (A340F)7475054
Front propeller shaft x Transfer (A340F)7475054
Rear propeller shaft x Transfer (A340F)7475054
Rear propeller shaft x Rear differential (A340F)7475054
Center support bearing x Body3637027
Drive plate x Crankshaft8385061
Torque converter clutch x Drive plate4142030
Stiffener plate x Engine (A340F)3738027
Stiffener plate x Transmission3738027
Front exhaust pipe x Exhaust manifold6263046
Front exhaust pipe x TWC4849035
Rear support member x Dynamic damper6162044
Oil cooler pipe3435025
Transmission x Engine7173053
Rear end plate x Transmission3738027
Rear support member x Transfer under cover2930021
Cross shaft x Frame2829021
Cross shaft x Transmission131309
Cross shaft x No.1 gear shifting rod131309
Exhaust pipe clamp(3RZ−FE)1919514
Exhaust pipe support bracket x Transmission (3RZ−FE)7173053
Exhaust pipe support bracket x Transmission (5VZ−FE)4445033
Exhaust pipe support bracket x Exhaust pipe (5VZ−FE)4445033
Park/neutral position switch (Nut)3.94035 in.·lbf
Park/neutral position switch (Bolt)131309
No.2 vehicle speed sensor5.45548 in.·lbf
Speedometer driven gear sleeve x Locking plate1616012
ATF temperature sensor x Transmission1515011
Shift lever assembly x Steering column assembly2930022
Page 232 of 2062
Downloaded from www.Manualslib.com manuals search engine SS−52
− SERVICE SPECIFICATIONSAUTOMATIC TRANSMISSION
1996 TOYOTA T100 (RM449U) Shift lever sub−assembly x Control shaft assembly
1919514
Casing cap x Control shaft support sub−assembly5051037
Page 264 of 2062
Downloaded from www.Manualslib.com manuals search engine DI – DIAGNOSTICS
ENGINE (3RZ-FE) DI-1
ENGINE (5VZ-FE) DI-127
AUTOMATIC TRANSMISSION DI-263
ANTI-LOCK BRAKE SYSTEM DI-319
SUPPLEMENTAL RESTRAINT SYSTEM DI-363
CRUISE CONTROL SYSTEM DI-408
Page 527 of 2062

Downloaded from www.Manualslib.com manuals search engine DI0VD−02
Vehicle Brought to Workshop
Customer Problem Analysis
Check DTC and Freezes Frame Data (Precheck)
Record or Print DTC and Freezed Frame Data P.
DI−265
Clear DTC and Freezed Frame Data P. DI−265
Visual Inspection
Setting the Check Mode Diagnosis P.
DI−265
1
Items insideare titles of pages in this manual, with the
page number indicated in the bottom portion. See the indicated
pages for detailed explanations.
P.
DI−264
Connect an OBD II scan tool or TOYOTA hand−held tester to DLC3
If the display shows ”UNABLE TO CONNECT TO VEHICLE” when you have connected the
scan tool/TOYOTA hand−held tester, inspect DLC3 P.
DI−265
2
3
4
5
6
symptom does not occur
Problem Symptom Confirmation8
7Symptom Simulation
P.
IN−16symptom occur
DTC Check
P. DI−265OK Code
11Preliminary Check
P.
DI−265
DTC Chart
P.
DI−276
Mechanical System Tests
P.
DI−265
Manual Shifting Test
P.
DI−265 OK
OK
Chapter 1
(Electronic)Chapter 2
(On−Vehicle)OKChapter 3
(Off−Vehicle)OK Problem Symptoms table
P. DI−282
Circuit
Inspection O/D Cancel Signal Check
Stop Light Signal Check
NG
Parts Inspection
NG
NGNG
Identification of ProblemRepairConfirmation TestEnd
NG
NG
12
NG13
14
1516
17 9
10
P. DI−282
P. DI−286 to DI−316
18
P. DI−282P. DI−282
− DIAGNOSTICSAUTOMATIC TRANSMISSION
DI−263
520 Author: Date:
1996 TOYOTA T100 (RM449U)
AUTOMATIC TRANSMISSION
HOW TO PROCEED WITH TROUBLESHOOTING
Troubleshoot in accordance with the procedure on the following page.
Page 528 of 2062
Downloaded from www.Manualslib.com manuals search engine DI0VE−01
Transmission Control
System Check SheetInspector ’s
Name:
Customer ’s Name
Registration No.
Registration Year
Frame No.
Date Vehicle
Brought InOdometer Readingkm
miles / /
/ /
Date Problem
Occurred
How Often Does
Problem Occur?/ /
Continuous Intermittent ( times a day)
Symptoms
Vehicle does not move ( Any position Particular position )
No up−shift ( 1st → 2nd 2nd → 3rd 3rd → O/D )
No down−shift ( O/D → 3rd 3rd → 2nd 2nd → 1st )
Lock−up malfunction
Shift point too high or too low
Harsh engagement ( N → D Lock−up Any drive position )
Slip or shudder
No kick−down
Others
Check ItemMalfunction
Indicator Lamp
DTC Check1st Time
2nd Time Normal code Malfunction code (Code ) Normal Remains ON
Normal code Malfunction code (Code ) DI−264
− DIAGNOSTICSAUTOMATIC TRANSMISSION
1996 TOYOTA T100 (RM449U)
CUSTOMER PROBLEM ANALYSIS CHECK