1996 TOYOTA T100 brake rotor

Downloaded from www.Manualslib.com manuals search engine SA0FN−01
W00399
SA0326
R04292
SST
− SUSPENSION AND AXLEFRONT AXLE HUB (4WD)
SA−23
1996 TOYOTA T100 (RM449U)
REMOVAL
1. REMOVE FRONT WHEEL
2. w/ ABS:
DISCONNECT ABS SPEED SENSOR FROM
STEERING KNUCKLE
3. REMOVE BRAKE CALIPER
(a) Remove the 2 bolts and disconnect the knuckle arm with
brake line bracket from the steering knuckle.
(b) Remove the 2 brake caliper set bolts.
(c) Support the brake caliper securely.
4. REMOVE FLANGE
(a) Remove the grease cap from the flange.
(b) Remove the bolt.
(c) Remove the 6 mounting nuts and washers.
(d) Using a brass bar and hammer, tap on the bolts head and
remove the 6 cone washers.
(e) Install and tighten the 2 bolts and remove the flange.
(f) Remove the gasket.
5. REMOVE AXLE HUB WITH DISC
(a) Using a screwdriver, release the lock washer.
(b) Using SST, remove the lock nut.
SST 09607−60020
(c) Remove the lock washer and adjusting nut.
(d) Remove the claw washer.
(e) Remove the axle hub with the disc together with the outer
bearing.
NOTICE:
Be careful not to damage the ABS speed sensor rotor.
6. REMOVE OIL SEAL AND INNER BEARING
(a) Using a screwdriver, pry out the oil seal.
(b) Remove the inner bearing from the hub.

Downloaded from www.Manualslib.com manuals search engine BR0A2−04
R14754
4WD:
2WD:
Speed Sensor
Sensor Rotor
N·m (kgf·cm, ft·lbf) : Specified torque
5.0 (51, 44 in.·lbf)
8.0 (82, 71in.·lbf)
Speed Sensor
8.0 (82, 71in.·lbf)
5.0 (51, 44 in.·lbf)
BR−64
− BRAKEFRONT SPEED SENSOR
1669 Author: Date:
1996 TOYOTA T100 (RM449U)
FRONT SPEED SENSOR
COMPONENTS

Downloaded from www.Manualslib.com manuals search engine BR0A5−04
R14755
Speed Sensor
Sensor Rotor
N·m (kgf·cm, ft·lbf) : Specified torque
13 (130, 9)
8.0 (82, 71 in.·lbf)
− BRAKEREAR SPEED SENSOR
BR−67
1672 Author: Date:
1996 TOYOTA T100 (RM449U)
REAR SPEED SENSOR
COMPONENTS