DI−178
− DIAGNOSTICSAUTOMATIC TRANSAXLE (A540H)
1996 RAV4 (RM447U)
(6) Check for the lock−up mechanism.
Drive in the D position, O/D gear, at a steady speed (lock−up ON) of about 75 km/h (47
mph).
Lightly depress the accelerator pedal and check that the engine speed does not change
abruptly.
If there is a big jump in engine speed, there is no lock−up.
(b) 2 position test.
Shift into the 2 position and, while driving with the accelerator pedal held constantly at the full throttle
valve opening position, push in one of the pattern selectors and check on the following points.
(1) Check to see that the 1 → 2 up−shift takes place and that the shift point conforms to that shown
on the automatic shift schedule (See page SS−35).
(2) While running in the 2 points and 2nd gear, release the accelerator pedal and check the engine
braking effect.
Evaluation:
ProblemPossible cause
If these is no engine braking effect2nd coast brake is defective
(3) Check for abnormal noises during acceleration and deceleration, and for shock at up−shift and
down−shift.
(c) L position test.
(1) While running in the L position, check to see that there in no up−shift to 2nd gear.
(2) While running in the L position, release the accelerator pedal and check the engine braking ef-
fect.
Evaluation:
ProblemPossible cause
If these is no engine braking effect1st and reverse brake defective
(3) Check for abnormal noises during acceleration and deceleration.
(d) R position test.
Shift into the R position and, while starting at full throttle, check for slipping.
CAUTION:
Before conducting this test ensure that the test area is free from personnel an obstructions.
(e) P position test.
Stop the vehicle on a gradient (more than 5°) and after shifting into the P position, release the parking
brake. Then check to see that the parking lock pawl holds the vehicle in place.
