1996 TOYOTA RAV4 radio

V07435
10
Tape PlayerPOWER COMING IN, BUT TAPE PLAYER NOT
OPERATING
Functions OK if different cassette tape inserted?Ye s
Cassette tape faulty.
No
Is radio operating normally?Ye s
Radio assembly faulty.
No
Does continuity exist in speaker wire harness?No
Speaker wire harness faulty.
Ye s
Temporarily install another speaker.
Functions OK?
NoYe s
Speaker faulty.
Radio assembly faulty.
11
Tape PlayerEITHER SPEAKER DOES NOT WORK
Is radio operating normally?
NoYe s
Radio assembly faulty.
Is hiss noise produced by non−functioning speaker?
NoYe s
Radio assembly faulty.
Does continuity exist in speaker wire harness?No
Speaker wire harness faulty.
Temporarily install another speaker.
Functions OK?OK
Speaker faulty. Ye s
NG
Radio assembly faulty.
− BODY ELECTRICALAUDIO SYSTEM
BE−75
1996 RAV4 (RM447U)

V04922
12
Tape player SOUND QUALITY POOR (VOLUME FAINT)
Functions OK if different cassette tape inserted?Ye s
Cassette tape faulty.
No
Operates normally after cleaning the heads?
NoYe s
Head dirty.
Is radio operating normally?
NoYe s
Radio assembly faulty.
Is speaker properly installed?
Ye sNo
Install properly.
Speaker faulty. Temporarily install another speaker. Functions OK?
No
Radio assembly faulty.
13Tape PlayerTAPE JAMMED, MALFUNCTION WITH TAPE SPEED OR
AUTO−REVERSE
Functions OK if different tape (less than 120 mins.) is inserted?Ye s
Ye s
Cassette tape faulty.
No
Is there a foreign object inside tape player?
NoYe s
Remove foreign object.
Operates normally after cleaning the heads?Ye s
Head dirty.
No
Radio assembly faulty.
BE−76
− BODY ELECTRICALAUDIO SYSTEM
1996 RAV4 (RM447U)

V07436
14
Tape PlayerAPS, SKIP, RPT BUTTONS NOT OPERATING
Functions OK if different cassette tape inserted?Radio assembly faulty. No
Ye s
Cassette tape faulty. {Less than 3 secs. of silence between songs (APS, RPT).
Less than 15 secs. of silence (SKIP).}
15
Tape Player
CASSETTE TAPE WILL NOT BE EJECTED
Is tape player operating normally?No
Cassette tape jammed.
Is radio operating normally?Ye s
NoYe s
Radio assembly faulty.
Check if DOME fuse is OK?
OKNG
Replace fuse.
Is B+ applied to radio assembly?
Ye s
Radio assembly faulty.No
B+ wire haness faulty.
− BODY ELECTRICALAUDIO SYSTEM
BE−77
1996 RAV4 (RM447U)

V04924
16
AntennaANTENNA−RELATED
Is antenna extended.No
Extend fully.
Ye s
Temporarily install another antenna.
Functions OK?Antenna faulty. Ye s
No
Radio side faulty.
17
NoiseNOISE PRODUCED BY VIBRATION OR SHOCK WHILE
DRIVING
Is speaker properly installed?
Ye sNo
Install properly.
Is each system correctly installed?
Ye sNo
With vehicle stopped, lightly tap each system.
Is noise produced?
NoYe s
Each system faulty.
Noise produced by static electricity accumulating
in the vehicle body.
BE−78
− BODY ELECTRICALAUDIO SYSTEM
1996 RAV4 (RM447U)

BE278−01
BE4671
Antenna Nut
BE5781
− BODY ELECTRICALAUDIO SYSTEM
BE−81
1996 RAV4 (RM447U)
REMOVAL
REMOVE ANTENNA ROD
HINT:
Perform this operation with the negative (−) terminal cable con-
nected to the battery.
(a) Turn the ignition switch to the ”LOCK” position.
(b) Remove the antenna nut.
(c) Press the ”AM” buttons on the radio receiver, and simulta-
neously turn the ignition switch to the ”ACC” position.
HINT:
The rod will extend fully and be released from the motor
antenna.
After removing the antenna rod, leave the ignition switch
at ”ACC”.
NOTICE:
TO prevent body damage when the antenna rod is released,
hold the rod while it comes out.

BE279−01
BE5780
BE4674
BE−82
− BODY ELECTRICALAUDIO SYSTEM
1996 RAV4 (RM447U)
INSTALLATION
INSTALL ANTENNA ROD
(a) Insert the cable of the rod until it reaches the bottom.
HINT:
When inserting the cable, the teeth on the cable must face
toward the front of the vehicle.
Insert the antenna approx. 300 mm (11.8 in.)
(b) Wind the cable to retract the rod by turning the ignition
switch to the ”LOCK” position.
HINT:
If the ignition switch is already in the ”LOCK” position, per-
form step 1 (c) first, then turn the ignition switch to the
”ACC” position.
In case the cable is not wound, twist it as shown in the il-
lustration.
Even if the rod has not retracted fully, install the antenna
nut and inspect the antenna rod operation. It will finally re-
tract fully.
(c) Inspect the antenna rod operation by pushing the radio
wave band select buttons.

31
G
Position of Parts in Instrument Panel
E 3 Electronically Controlled Transmission Pattern J 9 Junction Connector
Select SW J 10 Junction Connector
E 4 Engine Control Module J 11 Junction Connector
E 5 Engine Control Module
E 6 Engine Control Module K 2 Key Interlock Solenoid
F 8 Fuse Block O 4 O/D Main SW
H 4 Hazard SW P 2 Parking Brake SW
I 10 Ignition SW R 3 Radio and Player
R 4 Radio and Player
J 1 Junction Connector R 5 Rear Window Defogger SW
J 2 Junction Connector R 6 Remote Control Mirror SW
J 3 Junction Connector R 7 Rheostat
J 4 Junction Connector
J 5 Junction Connector S 4 Shift Lock ECU
J 6 Junction Connector S 5 Stop Light SW
J 7 Junction Connector
J 8 Junction Connector U 1 Unlock Warning SW

86
TAILLIGHT AND ILLUMINATION
A AAAAAAAAAAA
B ABABABABABA
B B B B B B B B B B
A B A B A B A B A B A B
IE JUNCTION
CONNECTORB J 8 , J 9
A
G
G
G
G
G
G
G (
A/T) ER
NATIO N
32
W-B
W-B JUNCTION CONNECTORB J 8 , J 9A
W-B
W-B
W-B
W-B
W-B
W-B
W-G
G G
G
G
G
G
(
A/T) (
M/T)
4 3
1 2
1 3
3 1
A 1A 5 B 10B 10
COMBINATION METB C 9 , C11A
RADIO AND PLAYERB R 3 , R 4A BLOWER SW B 5
CIG ARETTE LIGHTER ILLUM I C 6
A/C CONTROL SW A13
A/T INDICATOR LIGHT
[O /D M AIN SW ] O 4 W-G
W-B
W-B
W-B
W-B
W-B (
A/T)
1
ILL -
RHEO STAT R 7
T
E