1996 CHEVROLET S10 service

[x] Cancel search: service

Page 326 of 375

CHEVROLET S10 1996 2.G Owners Manual Downloaded from www.Manualslib.com manuals search engine I Short  Trip/City  Maintenance  Schedule I 
99,000 Miles (165 000 km) 
0 Change engine oil  and filter  (or every 
3 months,  whichever  occur

Page 327 of 375

CHEVROLET S10 1996 2.G Owners Manual Downloaded from www.Manualslib.com manuals search engine I Short  Trip/City  Maintenance  Schedule I 
0 Change automatic transmission fluid and 
filter 
if the vehicle  is mainly driven under 
one 
or

Page 328 of 375

CHEVROLET S10 1996 2.G Owners Manual Downloaded from www.Manualslib.com manuals search engine The services shown in this schedule  up to 100,000 miles 
(166 000 km)  should  be  performed  after 100,000  miles 
(166 000 km)  at  the  sam

Page 329 of 375

CHEVROLET S10 1996 2.G Owners Manual Downloaded from www.Manualslib.com manuals search engine Long  Tripmighway  Maintenance  Schedule 
I 
7,500 Miles (12 500 km) 
0 Change engine oil and filter  (or  every 
12 months, whichever occurs f

Page 330 of 375

CHEVROLET S10 1996 2.G Owners Manual Downloaded from www.Manualslib.com manuals search engine 15,000 Miles (25 000 km) 
0 Change engine oil and filter (or  every 
12  months,  whichever  occurs first). 
An Emission  Control Service. 
0 L

Page 331 of 375

CHEVROLET S10 1996 2.G Owners Manual Downloaded from www.Manualslib.com manuals search engine Long  TripMighway  Maintenance Schedde 
0 Check readfront  axle fluid level  and  add 
fluid 
as needed. Check constant  velocity 
joints  and

Page 332 of 375

CHEVROLET S10 1996 2.G Owners Manual Downloaded from www.Manualslib.com manuals search engine I Long  Tripmighway  Maintenance fi Schedule 
30,000 Miles (SO 000 km) (Continued) 
0 For  Two-Wheel-Drive  vehicles  only:  Clean and  repack

Page 333 of 375

CHEVROLET S10 1996 2.G Owners Manual Downloaded from www.Manualslib.com manuals search engine Long  TripEIighway  Maintenance  Schedule 
0 Check readfront  axle fluid level  and  add 
fluid as needed. Check constant velocity 
joints  and