1996 CHEVROLET MONTE CARLO AUX

Downloaded from www.Manualslib.com manuals search engine Wml CHEVROLET
GENERAL MOTORS, GM, the GM Emblem,
CHEVROLET, the CHEVROLET Emblem and the
name MONTE CARLO are registered trademarks
of
General Motors Corporation.
This manual includes the latest information
at the time it
was printed. We reserve the right to make changes in the
product after that time without further notice. For
vehicles first sold in Canada, substitute the name
“General Motors
of Canada Limited” for Chevrolet
Motor Division whenever it appears
in this manual.
Please keep this manual in your Chevrolet,
so it will be
there if you ever need
it when you’re on the road. If you
sell the vehicle, please leave this manual
in it so the new
owner can use
it.
Litho in U.S.A.
Part No. 10273392 B First Edition
WE SUPPORT
VOLUNTARY TECHNICIAN
CERTIFICATION THROUGH
National Institute for
AUTOMOTIVE SERVICE EXCELLENCE
We support voluntary
technician certification.
For Canadian Owners Who Prefer a
French Language Manual:
Aux propriktaires canadiens: Vous pouvez vous
procurer
un exemplaire de ce guide en franCais chez
votre concessionaire
OLI au:
DGN Marketing Services Ltd.
1500 Bonhill Rd.
Mississauga, Ontario L5T I C7
0 Copyright General Motors Corporation 1995
All Rights Reserved
ii

Downloaded from www.Manualslib.com manuals search engine Fan Knob
The knob with the fan symbol selects the force of air
you want. To turn the fan off, turn the knob to OFF.
Ten1perat.w-e Control
If your system does not have the auxiliary temperature
control option, the right knob changes the temperature
of the air coming through the system. Turn this knob
toward red (clockwise) for warmer air. Turn
it toward
blue (counterclockwise) for cooler air.
If your system does have the auxiliary temperature control
option, the center levers change the temperature of the air
coming through the system. The
DRIV lever sets the
temperature for the driver
and rear seat passengers, and
the
PASS lever sets the temperature for the front seat
passenger. For maximum defroster performance, set the
DRIV and PASS levers at full warm.
Mode Knob
The left knob has several settings to control the direction
of airflow. For each setting, set the temperature to
a
comfortable setting.
MAX: This setting recirculates much of the air inside
your vehicle and sends it through the instrument
panel outlets.
A/C: This setting brings in outside air and directs it
through the instrument panel outlets.
+fl BI-LEVEL: This setting brings in the outside
air and directs
it two ways. Half of the air is directed
through the instrument panel outlets. Most of the
remaining air
is directed through the floor ducts and a
little to
the defrost and side window vents.
+.
+e
/J VENT This setting brings in outside air and
directs
it through the instrument panel outlets.
'fl FLOOR: This setting sends most of the air
through the ducts near the floor. The rest comes out
of the defrost and side window vents.
+fl DEFOG: This setting allows half of the air to go
to the floor ducts and half to the defrost and side
window vents.
0
w.
9 DEFROST This setting directs most of the air
through
the defrost and side window vents. Some of the
air goes
to the floor ducts.

Downloaded from www.Manualslib.com manuals search engine NEXT (3): Press this button or the SEEK forward arrow
to search for the
next selection on the tape. Your tape
must have at least three seconds of silence between each
selection for NEXT or SEEK to work. The tape
direction arrow blinks during NEXT or SEEK operation.
The sound is muted during NEXT or SEEK operation.
REV (4): Press this button to reverse the tape rapidly.
Press it again to return to playing speed. The radio will
play the last-selected station while the tape reverses.
00 (5): Press this button to reduce background noise.
Note that the double-D symbol will appear on the display.
Dolby@ Noise Reduction is manufactured under
a
license from Dolby Laboratories Licensing Corporation.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories Licensing Corporation.
FWD (6): Press this button to advance quickly to
another part of
the tape. Press the button again to return
to playing speed. The radio will play the last-selected
station while the tape advances.
AM-FM: Press this button to play the radio when a tape
is
in the player.
TAPE AUX: Press this button to change to the tape
function when the radio is on. The tape symbol with an
arrow will appear on the display when the tape is active.
If your system is equipped with
a remote playback
device, pressing this button
a second time will allow the
remote device to play.
EJECT Press this button to remove the tape. The
radio will play. EJECT may be activated with either the
ignition or radio off. Cassettes may be loaded with the
radio off
if this button is pressed first.
CLN: This message may appear on the display. If it
does, your cassette tape player needs to be cleaned. It
will still play tapes, but you should clean
it as soon as
possible to prevent damage to your tapes and player.
See “Care of Your Cassette Tape Player” in the Index.
After you clean the player, press and hold
EJECT for
five seconds to reset the
CLN indicator. The radio will
display
--- to show the indicator was reset.

Downloaded from www.Manualslib.com manuals search engine RDM (2): Press this button to hear the tracks in random
rather than sequential
(1, 2, 3. . .) order. RANDOM will
show on
the display. Press RDM again to return to
sequential order. RANDOM is
set to OFF when the disc
is ejected.
NEXT (3): Press this button or the SEEK arrow
pointing to the right to go to the next track.
If you hold
the button or press
it more than once, the player will
continue moving forward through the disc. The sound
will be muted while seeking.
REV (4): Press and hold this button to return to a
passage quickly. Release
it to play the passage. You can
use the counter reading on
the display to locate a
passage more easily.
(5): Press this button to reduce background noise,
if the vehicle is equipped with a remote cassette. The
double-D symbol will appear on the display. Dolby does
not affect compact
disc operations.
Dolby Noise Reduction is manufactured under a license
from Dolby Laboratories Licensing Corporation. Dolby
and the double-D symbol are trademarks
of Dolby
Laboratories Licensing Corporation.
FWD (6): Press and hold this button to advance quickly
within
a track. Release it to resume playing. You can
use the counter reading on
the display to locate a
passage easily.
AM-FM: Press this button to play the radio when a
disc is in the player. The CD disc symbol will remain on
the display.
CD AUX: Press this button to change to the disc
function when the radio is
011. The CD disc symbol will
appear on the display when the disc is
in the player,
whether
it is active or not. If equipped with a remote
cassette, press this button
a second time to activate it.
EJECT Press this button to remove the disc. The radio
will play. The disc will start at the first track when you
reinsert
it.
If the ignition is off, you may still press this button to
eject the disc.
If you turn off the ignition or radio with a disc in the
player,
it will stay in the player. When you turn on the
ignition or system, the disc will start playing where it
was stopped. If you press EJECT but don't remove the
disc, the player will pull the disc back
in to protect it
after about one minute.
3-17