1996 AUDI A4 engine

48-45

Power steering pump (4-cyl. engine),
removing and installing


Special tools, test equipment and auxiliary
items

3204 3369 3094
VAG1590
Repair Manual, Body Exterior
Repair Manual, Body Interior
Repair Manual, Engine Mechanical

Removing

Repair Manual, Body Exterior, Repair Group 63
- Remove noise insulation panel.
- Remove front bumper:
- Move lock carrier to service position page 48
-46
.
Pa
ge 3 of 20 Power steerin
g pum
p, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.48.9

48-48

Removing ribbed belt on vehicles with 4-cyl.
gasoline engine

CAUTION!
Mark the running direction before removing. Reinstalling a used belt
in reversed running direction could damage the belt.
Removing ribbed belt on vehicles with 4-cyl. Diesel engine - Move tensioner in direction of arrow to loosen ribbed belt.
- Secure using 3204 drift.

CAUTION!
Mark the running direction before removing. Reinstalling a used belt
in reversed running direction could damage the belt. - Move tensioner in direction of arrow to loosen ribbed belt.
Pa
ge 6 of 20 Power steerin
g pum
p, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.48.9

48-49

Removing power steering pump pulley
(vehicles with 4-cyl. gasoline engine)

CAUTION!
Mark the running direction before removing. Reinstalling a used belt
in reversed running direction could damage the belt. - Remove coolant pump pulley.
- Remove ribbed belt.
- Remove power steering pump pulley.
- If necessary, file down corners of VAG1590 water pump wrench.
Pa
ge 7 of 20 Power steerin
g pum
p, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.48.9

48-50

Removing power steering pump (all engines)

- Using 3094 hose clamps, pinch off suction and return hoses.
- Place oil catch pan in position.

- Remove hose clamp -1- from suction hose.
- Remove suction hose, press out of retainer and lay to side.
- Remove pressure line -2-.
Pa
ge 8 of 20 Power steerin
g pum
p, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.48.9

48-55


CAUTION!
Note:
Illustration is shown without the lock carrier installed for greater clarity.
Repair Manual, Body Exterior, Repair Group 63
- Install ribbed belt.
Mark the running direction before removing. Reinstalling a used
belt in reversed running direction could damage the belt. Make sure that the belt is correctly seated in the pulleys.
- Top off hydraulic fluid page 48
-22
.
- Install bumper:- Start engine and make sure ribbed belt runs properly.
- Check hydraulic fluid level page 48
-22
.
- Bleed steering system page 48
-24
.
- Check steering system for leaks page 48
-25
.
Pa
ge 13 of 20 Power steerin
g pum
p, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.48.9

48-56


Power steering pump (6-cyl. engine),
removing and installing

Notes:

Always replace seals.
Do not reuse hydraulic fluid.
The power steering system uses hydraulic fluid,
Part No. G 002 000.
System hydraulic fluid capacity: approx. 1 liter
(1 qt).
1 -
Pressure line with hose
2 -
Bolt
8 Nm (71 in. lb)
3 -
Plate with mounting hole At intake manifoldFor mounting line - 1 -
4 -
Power steering pump Fill with hydraulic fluid before installing
Notes, page 48
-27

Pa
ge 14 of 20 Power steerin
g pum
p, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.48.9

48-57


5 -
Belt pulley
6 -
Socket-head bolts
25 Nm (18 ft lb)Counterhold using VAG1590 (if applicable)
while loosening and tightening
7 -
Bolts 25 Nm (18 ft lb)
8 -
Socket-head bolts 25 Nm (18 ft lb)
9 -
Power steering pump bracket
10 -
Ignition coils with bracket
11 -
Socket-head bolt 25 Nm (18 ft lb)
12 -
Banjo bolt 40 Nm (30 ft lb)
13 -
Seals 16 x 22 Always replace
14 -
Seal 18 x 24 Always replace6 cyl. 2V gasoline engine only
Pa
ge 15 of 20 Power steerin
g pum
p, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.48.9

48-58


Removing 15 -
Line union
50 Nm (37 ft lb)Vehicles with V6 2V gasoline engineVehicles with power steering pump: FP-3
16 -
Clamp Always replaceUse VAG1275 to tighten
17 -
Bolts 25 Nm (18 ft lb)
18 -
Slotted bushing
19 -
Socket-head bolt 25 Nm (18 ft lb)
20 -
Bracket
21 -
Suction line with hose
22 -
Bolt 8 Nm (71 in. lb)
- Unclip and remove engine cover Fig.
1 .
-
Unbolt and remove cover for ribbed belt
Pa
ge 16 of 20 Power steerin
g pum
p, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.48.9