1996 AUDI A4 torque

48-52

Installing

Installation note:
Before installing a new power steering pump,
add hydraulic fluid to the suction end and turn the
pump by hand until fluid emerges from the
discharge end.

- Turn pump by hand until fluid emerges from discharge end.
- Tighten bolts -1- and -2-.
Tightening torque: 20 Nm (15 ft lb)
Pa
ge 10 of 20 Power steerin
g pum
p, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.48.9

48-53

Installing power steering pump (power
steering pump FP-4) m.y. 1997

- Install pressure line and tighten banjo bolt -2-.

Always replace seals
Tightening torque: 50 Nm (37 ft lb)
- Install suction hose -1-.
Mark -P- (upper arrow) must align with seam on pump (lower arrow)
- Remove 3094 hose clamps.
Pa
ge 11 of 20 Power steerin
g pum
p, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.48.9

48-54


- Install pressure line and tighten banjo bolt -2-.

Always replace seals
Tightening torque: 50 Nm (37 ft lb)
- Install suction hose -1-.

- Tighten socket-head bolts for coolant pump pulley.
Tightening torque: 25 Nm (18 ft lb)
- Install fan at viscous coupling.
Tightening torque: 10 Nm (7 ft lb)
Pa
ge 12 of 20 Power steerin
g pum
p, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.48.9