1996 AUDI A4 coolant

13-34

- Actuate all window switches again for at least
one second in the "close" direction to activate
the automatic open/close function.

- Set clock to correct time.

Tightening torques

Component

Nm
Bracket for Generator, power steering
pump and viscous fan to cylinder block
52
1)
Support for intake manifold
to intake manifold 20
to bracket 20
Power steering pump to bracket 23
Pulley to coolant pump 23
Generator at bracket
M8 23
M10 46
Ribbed belt tensioner to bracket
23
Pa
ge 34 of 47 En
gine, disassemblin
g and assemblin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.13.1

13-37


9 -
Camshaft sprocket
For exhaust camshaftTake off toothed belt before removing and
installing Page 13
-40

Installation position Fig. 1
, Page
13
-39

10 -
Tensioner
11 -
Washer
12 -
Tensioner for toothed belt
13 -
O-ring
Always replaceLightly coat with coolant G 012 A8 D before
installing
14 -
Coolant pump Removing and installing Page 19
-12
Pa
ge 38 of 47 En
gine, disassemblin
g and assemblin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.13.1

13-44

Installing (adjusting valve timing)

Note:

The position of the toothed belt must be set as
described below, even after repairs in which the
belt is only taken off the camshaft sprocket.
When turning the camshaft, the crankshaft must
not be at TDC at any cylinder. There is a
danger of damage to valves/piston crown.

- Align marking on camshaft sprocket with marking at cylinder head
cover.
- Place toothed belt on crankshaft sprocket (observe direction of
rotation).
- Install toothed belt guard - lower part.
- Secure vibration damper/belt pulley with one bolt (note installation
arrangement).
- Set crankshaft to TDC for cylinder No. 1.
- Install toothed belt onto coolant pump, then tensioning roller, and finally
camshaft sprocket.
Pa
ge 45 of 47 En
gine, disassemblin
g and assemblin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.13.1