1995 PONTIAC GRAND-AM headlamp

Tilt Wheel (Option) Turn SignaVMultifunction Lever
A tilt steering wheel allows you to adjust the steering
wheel before you drive.
You can
also raise it to the highest level to give your
legs more room when you exit and enter the vehicle.
To tilt the wheel, hold the steering wheel and pull the
lever. Move the steering wheel
to a comfortable level,
then release the lever to lock the wheel in place.
The lever on the left side of the steering column
includes your:
Turn Signal and Lane Change Indicator
0 Headlamp High-Low Beam
0 Flash-To-Pass Feature
0 Cruise Control (Option)
2-32
ProCarManuals.com

Lamp Controls Parking Lamps
Rotate the switch counterclockwise up to the first
position to turn on:
0 Parking Lamps
Side Marker Lamps
Taillamps
Instrument Panel Lamps
Headlamps
Rotate the switch counterclockwise to the second
position to turn on:
0 Headlamps
Parking Lamps
Side Marker Lamps
Taillamps
Instrument Panel Lamps
Rotate the switch clockwise to
OFF to turn all the lamps
Off.
2-34
ProCarManuals.com

Lamps On Reminder
If you open the driver’s door while leaving the lamps on
and the ignition
off, you will hear a warning chime.
Headlamp High-Low Beam Changer
To change the headlamps
from low beam to high or
high to low, pull the turn
signal lever all the way
toward you. Then release it.
When the high beams are
on,
this blue light on the
instrument panel
also will
be on.
Flash-To-Pass (Except Canada)
Flash-to-pass lets you use your high beam headlamps to
signal a driver in front
of you that you want to pass.
To use it, pull the turn signaVmultifunction lever toward
you.
If your headlamps are off your high beam headlamps
will
turn on. They’ll stay on as long as you hold the
lever there. Release the lever to turn them
off.
If your headlamps are on, the flash-to-pass function will
not work. Use the lever
to change between high and low
beams.
2-35
ProCarManuals.com

Instrument Panel Intensity Control
You can brighten or dim your instrument cluster lamps
by rotating the instrument panel intensity control switch.
Rotate the switch all the way to the right to turn on the
interior courtesy lamps. Rotate the switch to the left to
turn off the instrument cluster lamps and displays.
Fog Lamps
The switch for your fog lamps is next to the instrument
panel intensity control.
Push the top of the switch
to turn the fog lamps on.
When using fog lamps, the parking lamps or low beam
headlamps must be on.
Fog lamps will go off whenever the high beam
headlamps come on. When the high beams go off, the
fog lamps will come on again.
Daytime Running Lamps (Canada Only)
Daytime Running Lamps (DRL) can make it easier for
others to see the front
of your vehicle during the day.
DRL can be helpful in many different driving
conditions, but they can be especially helpful in the
short periods after dawn and before sunset. Several
countries, including Canada, require
DRL.
A light sensor on top of the instrument panel makes the
DRL work,
so be sure it isn’t covered. The DRL system
will make your high beam headlamps come on at
reduced brightness when:
The ignition is on,
0 The headlamp switch is off, and
0 The parking brake is released (manual transaxle).
The shift lever is not in PARK (P) or NEUTRAL (N)
(automatic transaxle).
2-43
ProCarManuals.com

When the DRL are on, only your high beam headlamps
will be on. The taillamps, sidemarker and other lamps
won’t be on. Your instrument panel won’t be lit up
either.
When it’s dark enough outside, your headlamps will
come on at
full brightness. The other lamps that come
on
with your headlamps will also come on. When it’s
bright enough outside, the regular lamps will go
off and
your high beam headlamps change to the reduced
brightness
of the DRL.
To idle your vehicle with the DRL off, set the parking
brake On a manual transaxle or put the vehicle in
PARK (P) or NEUTRAL (N) on an automatic transaxle,
while the ignition is
in the OFF or LOCK position. Then
start the vehicle. The DRL will stay off until you release
the parking brake on a manual transaxle or shift out
of
PARK (P) or NEUTRAL (N) on an automatic transaxle.
As with any vehicle, you should turn the regular
headlamp system on any time you need it.
Front Reading Lamps (Option)
These lamps and the interior courtesy lamps will come
on when you open the doors.
To turn on a reading lamp when the doors are closed,
press the button. Press
it again to turn the lamp off.
2-44
ProCarManuals.com

To reactivate the interior lamps, either:
The ignition must be turned on
The activated lamp switch must be turned off and
0 A front door must be opened.
The Battery Rundown Protection feature will also be
activated when any door of your vehicle is left open.
Also, if your vehicle is left with the ignition turned off
€or over 24 days, battery power to your clock, audio
system
and Keyless Entry (if you have this option) will
be
turned off to reduce battery drain. When the ignition
is turned on again, battery power will be resupplied.
However, under these conditions, it will be necessary to
reset the clock
and audio system settings.
then on, OR
Inside Manual Daymight Rearview
Mirror
To reduce glare from headlamps behind you, move the
lever toward you to the night position.
2-46
ProCarManuals.com

Driving at Night 0
0
0
0
Night driving is more dangerous than day driving. One
reason is that some drivers
are likely to be impaired --
by alcohol or drugs, with night vision problems, or by
fatigue.
Here are some tips on night driving.
Drive defensively.
0
0
Don’t drink and drive.
Adjust your inside rearview mirror to reduce the glare from headlamps behind you.
Since you can’t see as well, you may need to slow
down and keep more space between you and other
vehicles.
Slow down, especially on higher speed roads. Your
headlamps can light up only so much road ahead.
In remote areas, watch for animals.
If you’re tired, pull off the road in a safe place and
rest.
Night Vision
No one can see as well at night as in the daytime. But as
we get older these differences increase.
A 50-year-old
driver may require at least twice as much light to see the
same thing at night as a 20-year-old.
What you do in the daytime can also affect your night
vision. For example, if you spend the day in bright
sunshine you are wise to wear sunglasses. Your eyes will
have less trouble adjusting to night. But if you’re
driving, don’t wear sunglasses at night. They may cut
down on glare from headlamps, but they also make a lot
of things invisible.
4-13
ProCarManuals.com

You can be temporarily blinded by approaching lights.
can take a second or two, or even several seconds, for
your eyes to readjust to the dark. When you
are faced
with severe glare (as from a driver who doesn’t lower
It
the high beams, or a vehicle with misaimed headlamps),
slow
down a little. Avoid staring directly into the
approaching lights.
Keep your windshield and all the glass on your vehicle
clean
-- inside and out. Glare at night is made much
worse
by dirt on the glass. Even the inside of the glass
can build up a film caused by dust. Dirty glass makes
lights dazzle and flash more than clean glass would,
making the pupils of your eyes contract repeatedly.
Remember that your headlamps light up far less of a
roadway when you are
in a turn or curve. Keep your
eyes moving; that way, it’s easier to pick out dimly
lighted objects. Just as your headlamps should be
checked regularly for proper aim,
so should your eyes
be examined regularly. Some drivers suffer from night
blindness
-- the inability to see in dim light -- and aren’t
even aware of it.
Driving in the Rain
Rain and wet roads can mean driving trouble. On a wet
road you can’t stop, accelerate or
turn as well because
your tire-to-road traction isn’t as good
as on dry roads.
And, if
your tires don’t have much tread left, you’ll get
even
less traction. It’s always wise to go slower and be
cautious if rain starts to fall while you are driving. The
surface may get wet suddenly when your reflexes are
tuned for driving on dry pavement.
4-14
ProCarManuals.com