86ELECTRICAL
48
REPAIR STARTER MOTOR HEAT SHIELD - 4.0 V8
Service repair no - 86.60.12
Remove
1.Disconnect battery negative lead.
2.Raise vehicle on ramp.
3.Remove heated oxygen sensor from RH exhaust
front pipe.
See EMISSION CONTROL, Repair,
Heated Oxygen Sensor (HO2S) - 4.0 V8
4.Remove bolt securing heat shield to RH engine
mounting bracket.
5.Release heat shield clip from starter solenoid.
6.Manoeuvre heat shield rearwards and around
starter motor.
Refit
7.Reverse removal procedure.BULB - FRONT FOG LAMP
Service repair no - 86.40.94
Remove
1.Remove front fog lamp.
See fog lamp - front
2.Remove 2 Torx screws securing fog lamp to
bracket and collect 2 spacers.
3.Release fog lamp adjustment ball joint from
bracket and remove lamp.
4.Release lamp lens from shroud.
5.Disconnect 2 Lucars from bulb.
6.Release bulb retaining clip.
7.Remove bulb from lens.
ELECTRICAL
49
REPAIR Refit
8.Fit bulb to lens.
9.Secure bulb retaining clip.
10.Connect 2 Lucars to bulb.
11.Position lamp lens to shroud.
12.Position lamp to bracket and secure fog lamp
adjustment ball joint to bracket.
13.Position spacers, align lamp to bracket and
secure with Torx screws.
14.Fit front fog lamp.
See fog lamp - front; Refit
CLOCK
Service repair no - 88.15.07
Remove
1.Remove drinks tray.
See CHASSIS AND
BODY, Repair, drinks tray
2.Release 4 clock panel securing tags.
3.Release clock panel from louvre panel.
4.Disconnect 2 multiplugs from clock.
5.Remove clock.
Refit
6.Position clock.
7.Connect multiplugs to clock and secure clock to
louvre panel.
8.Fit drinks tray.
See CHASSIS AND BODY,
Repair, drinks tray; Refit
REAR SPEAKER
Service repair no - 88.15.12
Remove
1.Remove 4 screws securing speaker.
2.Release speaker and disconnect 2 Lucars.
3.Remove speaker.
Refit
4.Position speaker, connect Lucars and secure
with screws.
