1995 JEEP CHEROKEE steering

[x] Cancel search: steering

Page 580 of 2198

JEEP CHEROKEE 1995  Service Repair Manual Circuit T17 from fuse 3 in the power distribution
center supplies voltage to the coil and contact sides
of the TCC relay. When the PCM provides a ground
path on circuit K54 for the coil side of the re

Page 581 of 2198

JEEP CHEROKEE 1995  Service Repair Manual DIAGRAM INDEXÐ2.5L ENGINE
Component Page
Automatic Shut Down Relay.................8W-30-8
Camshaft Position Sensor..................8W-30-10
Crankshaft Position Sensor.................8W-30-11
Data

Page 622 of 2198

JEEP CHEROKEE 1995  Service Repair Manual HORN/CIGAR LIGHTER
HORN
The horn system uses two switches and horn relay.
The horn switches are on the steering wheel.
Circuit A7 from fuse 3 in the Power Distribution
Center (PDC) feeds a fuse block

Page 780 of 2198

JEEP CHEROKEE 1995  Service Repair Manual CONNECTOR LOCATIONS
GENERAL INFORMATION
This section provides illustrations identifying com-
ponent and connector locations in the vehicle. A con-nector index is provided. Use the wiring diagrams in
e

Page 781 of 2198

JEEP CHEROKEE 1995  Service Repair Manual Connector # Color Location Fig.
C226......BK ...Left Kick Panel
C227......BK ...OnI.P.Right of Steering Column . . .10
C228......BK ...Left Side of Steering Column.....14
C229......BK ...TopofBrake Pe

Page 795 of 2198

JEEP CHEROKEE 1995  Service Repair Manual Fig. 14 Steering Column, Fuse Panel and ABS Control Module Wiring Connectors
8W - 90 - 16 8W-90 CONNECTOR LOCATIONSÐXJ VEHICLESJ

Page 898 of 2198

JEEP CHEROKEE 1995  Service Repair Manual HORN/CIGAR LIGHTER
HORN
The horn system uses two switches and horn relay.
The horn switches are on the steering wheel.
Circuit A7 from fuse 3 in the power distribution
center (PDC) feeds a fuse block

Page 1064 of 2198

JEEP CHEROKEE 1995  Service Repair Manual CONNECTOR LOCATIONS
GENERAL INFORMATION
This section provides illustrations identifying com-
ponent and connector locations in the vehicle. A con-nector index is provided. Use the wiring diagrams in
e