
 
Here  you  can  learn  about  the  many standard  and  optional  features  on 
your  Oldsmobile.  and  information  on 
starting.  shifting  and  braking 
. Also 
explained  are  the  instrument  panel 
and  the  warning  systems  that  tell you 
if everything  is working  properly - 
and  what to do  if you have  a 
problem 
. 
Part 2 
Features & Controls 
Keys ........................................................................\
................................................... 44 
Front  Doors 
........................................................................\
....................................... 45 
Remote  Lock  Control 
........................................................................\
........................ 48 
Liftgate 
........................................................................\
............................................... 56 
Starting  Your  Engine 
........................................................................\
........................ 58 
Engine Coolant  Heater ........................................................................\
...................... 61 
Loclts 
........................................................................\
.................................................. 45 
Sliding Door 
........................................................................\
...................................... 51 
Ignition ........................................................................\
.............................................. 58 
Shifting  the Transaxle 
........................................................................\
....................... 62 
Parking  Brake 
........................................................................\
.................................... 65 
Shifting  into Park 
........................................................................\
.............................. 66 
Horn ........................................................................\
................................................... 69 
Tilt  Steering  Wheel 
........................................................................\
............................ 69 
Windows 
........................................................................\
............................................ 69 
Turn  Signal  and  Lane  Change Indicator 
.................................................................. 71 
Cruise  Control ........................................................................\
................................... 72 
Headlights 
........................................................................\
.......................................... 74 
Interior  Lights 
........................................................................\
................................... 76 
Windshield Wipers 
........................................................................\
............................ 77 
Windshield  Washer 
........................................................................\
........................... 78 
Mirrors 
........................................................................\
............................................... 86 
Glove 
Box and  Storage  Compartments .................................................................... 88 
Luggage  Carrier ........................................................................\
................................. 92 
Instrument  Panel 
........................................................................\
............................... 96 
Warning  Lights, Gages  and  Indicators 
................................................................... 100 43 
ProCarManuals.com 

ud. If the  selector  lever is  put  in 1, thc 
ansaxle  won’t shift into first gear  unti 
le  vehicle  is  going  slowly  enough. 
NOTICE: 
If your  front  wheels  can’t  rotate, 
don’t  try to drive. 
This might 
happen 
if you  were  stuck  in  very 
deep  sand or mud  or  were  up 
against  a  solid object. 
You could 
damage your  transaxle. Also, 
if you 
stop  when  going uphill,  don’t hold 
your  vehicle  there  with  only the 
accelerator  pedal. This could 
overheat  and  damage the transaxle. 
Use  your  brakes  or  shift into 
P 
(Park)  to hold your vehicle  in 
position  on a hill. 
Parking Brake 
To Set the  Parking  Brake: 
Hold  the regular  brake pedal down  with 
your right foot.  Push down  the  parking 
brake  pedal with  your  left foot.  If the 
ignition  is on,  the  brake  system warning 
light  will  come 
on. See  the Index under 
Brake System Warning Light. 
To Release the  Parking Brake: 
Hold  the regular  brake pedal down with 
your  right foot while  you push  down  on 
the  parking  brake  pedal with your  left 
foot.  (To  release  the  tension  on  the 
parking  brake  cable, you  will  need to 
apply  about  the  same  amount  of 
pressure  to  the parking  brake  pedal as 
you  did  when you set the  parking 
brake.)  When  you  remove  your  foot from 
the parking  brake  pedal, it will  pop 
up  to  the  release  position. 
NOTICE: 
Driving  with  the  parking  brake  on 
can  cause  your rear  brakes  to 
overheat. 
You may  have  to replace 
them,  and  you could also damage 
other  parts  of your  vehicle. 
If You are Towing a Trailer  and  are 
Parking  on 
Any Hill: 
See the Index under Towing a Trailer. 
That  section  shows what  to  do  first to 
keep  the trailer from  moving. 
ProCarManuals.com 

Features & Controls 
66 
I Sh@ing Into P (Park) 
1. Hold the brake pedal  down with your 
right 
foot and  set  the  parking brake. 
2. Move the shift  lever  into P (Park) 
position  like this: 
Pull  the lever  toward you. 
Move  the lever up as far as it  will I I 
go. 
3. Move  the ignition  key to Lock. 
4. Remove  the key  and  take  it  with you. 
If you  can walk  away from your 
vehicle with  the ignition  key in your 
hand,  your vehicle  is in 
P (Park). 
ProCarManuals.com 

Leaving Your Vehicle  With the 
Engine  Running 
If  you  have  to leave your vehicle  with 
the  engine  running,  be  sure  your vehicle 
is  in 
P (Park)  and  your parking  brake  is 
firmly  set before  you  leave  it. After 
you’ve  moved  the shift  lever  into  the 
P 
(Park)  position,  hold the regular  brake 
pedal  down.  Then,  see  if you  can move 
the  shift lever away  from 
P (Park) 
without  first pulling  it  toward you. 
If  you  can,  it  means  that  the  shift lever 
wasn’t  fully locked  into 
P (Park). 
Torque  Lock 
If you  are parking  on a hill and  you 
don’t  shift your  transaxle into 
P (Park) 
properly,  the weight 
of the  vehicle  may 
put  too  much force  on  the parking  pawl 
in  the  transaxle.  You  may find it 
difficult  to pull  the shift  lever  out of 
P 
(Park).  This is  called  “torque  lock.” To 
prevent torque lock, set the  parking 
brake  and  then  shift into 
P (Park) 
properly before  you  leave the driver’s 
seat.  To  find out how,  see 
Shifting Into 
P (Park) in the Index. 
When  you  are ready  to drive,  move the 
shift  lever  out of 
P (Park)  BEFORE  you 
release  the parking  brake. 
If  “torque  lock’’ does  occur, you  may 
need  to have  another  vehicle push yours 
a  little  uphill to  take  some 
of the 
pressure  from the transaxle, 
so you  can 
pull  the shift  lever  out of 
P (Park). 
Parking Over nings That 
Burn 
67 
ProCarManuals.com 

74 
Features & Controls 
To slow down  in very  small  amounts, 
push  the  button  for less  than  half 
a 
second.  Each time you do  this,  you'll 
go 
1 mph (1.6 ltm/h)  slower. 
Passing  Another  Vehicle  While 
Using  Cruise  Control 
Use  the accelerator pedal  to increase 
your  speed.  When  you  take your foot  off 
the  pedal,  your  vehicle  will  slow  down 
to  the  cruise control speed  you set 
earlier. 
Using  Cruise  Control  on Hills 
How  well  your  cruise control  will work 
on  hills  depends  upon your speed, load, 
and  the  steepness  of the  hills.  When 
going  up steep  hills,  you  may  have  to 
step  on  the  accelerator pedal  to 
maintain your speed. When  going 
downhill, 
you may  have  to brake or 
shift  to a lower  gear  to keep your speed 
down.  Of course,  applying  the brake 
takes 
you out  of cruise control.  Many 
drivers  find this to be  too  much trouble 
and  don't  use cruise control  on steep 
hills. 
To Get  Out of Cruise  Control 
There  are two  ways  to  turn off the 
cruise control: 
Step  lightly  on  the  brake pedal; OR 
Move the cruise switch  to OFF. 
If your  vehicle has the optional traction 
control  system 
(TCS), the cruise 
control  will shut 
off when TCS is 
actively  controlling  wheel spin. See the 
Index under Traction  Control  System. 
To Erase  Cruise  Speed  Memory 
When you turn off the  cruise control  or 
the  ignition, your cruise control set 
speed  memory  is  erased. If you  have  the 
3800 V6 engine, cruise control  memory 
will  also be erased when  you  place the 
transaxle  in 
P (Park). 
Headlights 
Push the p$ switch  to  turn  on: 
Parking Lights 
Side Marker  Lights 
Taillights 
Instrument Panel  Lights 
Pull  the switch  to  turn 
off the lights. 
ProCarManuals.com 

Features & Controls 
104 
closer to the floor. It may  take  longer  to 
stop.  If the  light  is  still  on, have  the 
vehicle towed for service.  (See 
Towing 
Your Vehicle in  the Index.) 
The brake  system  warning  light  will  also 
come  on when 
you set your parking 
brake,  and  it will  stay  on if your parking 
brake  doesn’t release  fully. If it stays  on 
after  your parking brake  is  fully 
released,  it means  you have 
a brake 
problem. 
L Wb 
Anti-Lock Brake System  Warning 
Light 
With anti-lock,  this light  will  go  on 
when  you start  your engine  and  it will 
stay  on for  three  seconds.  That’s 
normal.  If the  light  doesn’t come  on, 
have  it  fixed 
so it  will  be ready  to warn 
you  if there  is a problem. 
If  the  light  flashes when you’re driving, 
you  don’t  have anti-lock brakes  and 
there’s  a  problem with your regular 
brakes.  Pull off the  road and  stop 
carefully. 
You may  notice  that  the  pedal 
is  harder  to push.  Or,  the  pedal may  go 
closer  to  the floor. It  may take  longer  to 
stop.  Have  the vehicle towed for 
service.  (See 
Towing Your Vehicle in 
the 
Index.) 
I 
If the  anti-lock brake system warning 
light  stays  on longer  than normal after 
you’ve  started  your engine,  turn  the 
ignition  off. Or, if the  light  comes on 
i 
and stays  on when you’re driving,  stop ! 
as soon  as possible  and  turn  the  ignition 
off.  Then  start  the  engine again to reset 
! I 
the  system.  If the  light  still stays  on, or j 
comes  on again  while  you’re driving, ~ 
your Oldsmobile needs service. If the ! 
light is  on  but  not flashing  and  the 
regular brake system warning light isn’t 
on, 
you still  have  brakes,  but  you don’t 
have anti-lock  brakes. 
ProCarManuals.com 

Your Driving and the Road 
144 
Driving too fast  through  large water 
puddles or  even  going  through  some  car 
washes can cause problems, too. The 
water  may  affect  your brakes.  Try to 
avoid  puddles. But 
if you can’t, try  to 
slow 
down before  you  hit them. 
Hydroplaning 
Hydroplaning is dangerous. So much 
water  can  build up under your tires  that 
they can actually ride  on the  water. This 
can  happen  if the  road  is wet enough 
and  you’re  going  fast enough. When 
your  vehicle  is  hydroplaning, it has little 
or  no  contact with  the road. 
Hydroplaning doesn’t  happen often. 
But it can  if your tires haven’t much 
tread  or  if the  pressure  in one or more  is 
low.  It can happen 
if a lot  of water  is 
standing  on  the  road. If you  can see 
reflections  from trees,  telephone poles, 
or  other  vehicles,  and raindrops 
“dimple”  the water’s surface,  there 
could  be  hydroplaning. 
Hydroplaning  usually happens  at higher 
speeds. There just  isn’t a hard  and fast 
rule  about  hydroplaning. The best 
advice  is  to slow  down when it  is 
raining. 
Some  Other  Rainy  Weather  Tips 
Turn  on your  low-beam  headlights - 
not just  your parking lights - to help 
make  you more  visible  to others. 
Besides  slowing  down, allow some 
extra  following  distance. And  be 
especially  careful  when you pass 
another  vehicle.  Allow  yourself  more 
clear  room  ahead,  and  be prepared  to 
have  your view  restricted  by road 
spray. 
Have  good  tires with proper tread 
depth.  (See 
Tires in  the Index.) 
ProCarManuals.com 

There is something  about  an easy 
stretch 
of road  with  the same scenery, 
along  with  the  hum 
of the tires  on  the 
road,  the  drone 
of the  engine,  and  the 
rush 
of the  wind  against  the vehicle  that 
can  make  you  sleepy. Don’t  let  it 
happen  to you! 
If it  does,  your vehicle 
can leave  the road in 
less than a 
second, and  you  could  crash  and  be 
injured. 
What  can you  do  about  highway 
hypnosis? First,  be aware  that it  can 
happen. 
Then  here are some  tips: 
Make  sure your vehicle  is well 
ventilated,  with  a  comfortably cool 
interior. 
ahead  and to  the  sides. Check your 
mirrors  and your  instruments 
frequently. 
If you  get sleepy,  pull off the road  into 
a  rest,  service,  or parking  area  and 
take  a  nap,  get some exercise,  or  both. 
For safety,  treat drowsiness  on the 
highway  as  an emergency. 
Keep your eyes  moving.  Scan the road 
I 
Hill  and  Mountain  Roads 
Driving on steep  hills or  mountains is 
different from driving  in flat  or rolling 
terrain. 
If you  drive  regularly  in steep  countly, 
or if you’re planning  to visit  there,  here 
are  some  tips that  can make  your trips 
safer  and more enjoyable. 
Keep your vehicle in  good shape. 
Check all fluid  levels and also  the 
brakes,  tires,  cooling system  and 
transaxle.  These  parts  can  work hard 
on  mountain  roads. 
Know  how  to go down hills. The most 
important  thing  to know 
is this: let 
your engine  do some 
of the  slowing 
down.  Shift to a lower gear when  you 
go  down  a  steep 
or long hill. 
147 
ProCarManuals.com